CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 756020
Samy's Part #: MATT756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B756040
Samy's Part #: MATTB756040
Includes FREE 6 In. Pin with Collar
Includes Free
Total Value: $16.85
Availability: In Stock
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 3800
Samy's Part #: S-046462

The Chimera Standard Light Boom is used to quickly and easily position overhead lights with softboxes. It operates like a small jib arm thus providing 72 inches of reach with 360 degrees rotating head extension for angular adjustment. Special single handle is attached on the head extension to...
Availability: In Stock
$61000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: D600
Samy's Part #: AVEND600

Boom arms provide an unobstrusive method of positioning lighting fixtures and reflectors above a subject. Supports 66 lbs at the minimum extension of 46 in. Supports 15.4 lbs at the maximum extension of 83 in.
  • Steel Construction
  • 83" Maximum Extension
  • Rubber Handle
  • Counterweight Hook
  • 5/8"
...
Availability: In Stock
$12099
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 123
Samy's Part #: MANF123

The Manfrotto 123 Pivoting Boom Clamp is a pivoting clamp for use with all Super Booms and Heavy Duty Booms. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and 5/8" female receptor.
Availability: In Stock
$4988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B119738
Samy's Part #: MATTB119738

The Matthews Pivoting Yoke for Matthboard (Black) is a positive lock off yoke made to hold Expendable Reflectors, gives the same feel and look as a conventional hard board yoke.

Features:
  • Gives the same look as conventional hard board yoke
  • Made to hold expendable reflectors
Availability: In Stock
$12880
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DL-3103
Samy's Part #: S-051067

The versatility of the Dot Line Corp. Super Clamp For Seamless Backgrounds is equaled only by its durability and is used to clamp the seamless background papers. An item to have on hand at all times, the Super Clamp can be clamped to anything of 1.75 inches. The Super Clamp can also accept a s...
Availability: On Backorder
$295
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$18800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA099
Samy's Part #: S-034621

The Phototools Quadruple Shoe Mount Bracket allows you to attach up to four flashes to one light stand. The bracket also features an umbrella socket which can be used with or without a shoot through or reflective umbrella.

If you are looking for increased overall power or a quicker recycling...
Availability: In Stock
$2999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: LSBBOOM
Samy's Part #: PHOTLSBBOOM

The 3 section boom extends lights or props up to 5 feet away from your stand. It is strong enough to hang a small size softbox over head for a main or hairlight. The flexible boom adjusts from 5' to 7' by using either two or three sections. Taking this boom on location is a breeze with easy tr...
Availability: In Stock
$13995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: D700B
Samy's Part #: AVEND700B

Positions and holds reflector for hands free use.
Availability: In Stock
$5688
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$18800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: A2033FCBKIT
Samy's Part #: S-000917

Avenger black 40" century stand folding base and kit. This kit includes a 2.5" swivel grip and a 40" grip arm. A favorite among professional photographers, film makers and videographers everywhere. It is durable and designed to collapse flat for easy transport and storage. The leg design provides...
Availability: On Backorder
$19588
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 3810
Samy's Part #: S-046463

The Chimera Compact Light Boom is used to quickly and easily position overhead lights with softboxes. It operates like a small jib arm thus providing 32 inches of reach with 360 degrees rotating head extension for angular adjustment. Special single handle is attached on the head extension to control...
Availability: In Stock
$48500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RS1130
Samy's Part #: S-022024

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: D600CB
Samy's Part #: AVEND600CB

Mini boom black chromed. Min extension 117cm-Max load 30kg. Max extension 212cm-Max load 7kg. 16mm female stand attachment.
  • Black Chrome-plated Steel Construction
  • 83" Maximum Extension
  • Rubber Handle
  • Counterweight Hook
  • 5/8" Stud and Receiver
Availability: In Stock
$12099
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9931
Samy's Part #: S-054845

When in use as a traditional boom arm, the
Westcott Boom Arm and Pole requires the Westcott Boom Clamp and Grip Head for mounting to a c-stand or heavy-duty light stands.

FEATURES:
  • Securely mount the Westcott Boom Arm & Pole onto a stand
  • Quick-release locking system
  • Durable all-metal design
...
Availability: In Stock
$4990
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 5001B
Samy's Part #: MANF5001B

This Manfrotto 5001B Nano Retractable Compact Light Stand is perfect for supporting small light fixtures on location. The stand folds down to 19", which makes it easy to fit into a location case.
Availability: In Stock
$5799
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 244
Samy's Part #: MANF244

The Manfrotto 244 Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera. It has 5/8" studs on ball joints at both ends with...
Availability: In Stock
$12799
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 861833
Samy's Part #: S-028884

This clever Matthews 3/8 To 5/8 Baby Adapter allows you to make quick changes to your equipment and gives you the option to convert 3/8 to 5/8 threaded system to mount your equipment with lot more options.
Availability: In Stock
$2799
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: BLSAT
Samy's Part #: S-048517

The must have ProMediaGear 5/8 In. Stainless Steel Light Spigot Adapter for any photographer and videographer with ΒΌ top mounted screw. The 5/8" Stainless Steel Light Spigot mounts from the top down with a 1/4-20 screw allowing the adapter to be bolted onto cages, rigs, handles and countless other...
Availability: In Stock
$2495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA095
Samy's Part #: S-034620
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$2999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B427080
Samy's Part #: S-024499

The Matthews Maxi Matthpole Black (8-14.9 ft.) is stronger and more durable than any similar product. Unique "expanding casting" provides the pressure for holding the Matthpole in place. Used primarily in studios for mounting seamless paper and backdrops with the use of Super Mafer Clamps and...
Availability: In Stock
$14320
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 756120
Samy's Part #: MATT756120
This Matthews Century Plus kit consists of a C Plus Stand with 20 inch riser and removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The maximum height of this stand with the arm extended is 5.25' (1.6 m). The stand itself rises to...
Availability: In Stock
$18800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 427802
Samy's Part #: MATT427802

The Matthews Mini Boom (Chrome) is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a...
Availability: In Stock
$16320
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: A2030DKIT
Samy's Part #: S-001817

This stand features a detachable "turtle" base that is easily removed to facilitate transportation. A light head can be mounted to the base directly with the aid of a stand adapter. The innovative design on the Century Stand base allows individual legs to be set at any angle, and can be positioned...
Availability: In Stock
$21588
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B389787
Samy's Part #: MATTB389787

The Matthews Light Medium Kit Aluminum Stand is designed primarily for use in lighting kits, this stand is compact and light weight. This stand employs a brake shoe system for locking off the riser tubes as opposed to pinch castings.
Availability: In Stock
$8320
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SHOTBAG20
Samy's Part #: S-033998

The STUFFT 20 lb Shot Bag is encapsulated in an inner poly bag and embroidered with the word "shot" and the weight in pounds on the outside. The bag is used to stabilize light stands or set walls.
Availability: In Stock
$5495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 244N
Samy's Part #: MANF244N

Articulated arm. Features as 143N, but a large locking knob takes the place of cam-lever. Variable friction and locking of arm obtained by adjusting knob.

Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
$11299
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 299552
Samy's Part #: S-004124

Sandbags come in a variety of shapes and weights. They are used for securing the bases of light stands and set walls. Many have handles, for hanging on hooks or risers. Some have two wings, to allow draping over light stand legs.
Availability: In Stock
$3695
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 437004
Samy's Part #: MATT437004

The Matthews Truss Me Bracket 90 Degree Pass Through allows a vertical truss column to pass through the horizontal member to allow for multiple horizontal members. In cooperation with random lengths or 1-1/4" aluminum or steel pipe, will make an immediate truss. Material selection for various...
Availability: In Stock
$22595
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: YA056
Samy's Part #: S-034614

The Phototools Adjustable Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.
Availability: In Stock
$1999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RS3090P
Samy's Part #: S-016998

The RPS Triple Flash/Umbrella Mount is a great way to utilize your on camera flash units to create a lightweight light source that is ideal for the road. The mount features 3 adjustable locking flash shoes with a central umbrella receptacle. A 1/4"-20 tap in the bottom of the mount accepts...
Availability: In Stock
$2495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KG702811
Samy's Part #: S-039080

Kupo Super Claw is a small clamp with many great features! The new design allows for an increased payload over the former KUPO Pincer clamp and other clamps in the market. What separates this clamp from the competition is the fact that the pads are customer replaceable. Some companies use tape...
Availability: In Stock
$2500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1004BAC
Samy's Part #: S-009343

This 12' Aluminum Master Stand (Black) lightweight construction and compact-size of this stand make it a practical tool for your lighting support needs. With a patented Quick Stack System (QSS) you can easily stack the stands together with their built in connectors for portable transport and s...
Availability: In Stock
$11499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 756040
Samy's Part #: MATT756040
Includes FREE 6 In. Pin with Collar
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]