CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 756020
Samy's Part #: MATT756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RS3135
Samy's Part #: S-033407

The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: On Backorder
$2795
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: A2018L
Samy's Part #: S-052330

This Turtle base Avenger C-Stand with Sliding Leg (Chrome-plated, 5.75 ft.) with 3 sections and 2 risers. It features 1 sliding leg enabling you to use the stand on uneven surfaces. This stand has a maximum payload of 8kg and a maximum height of 1.75m. The stand is also available in black.

Features:...
Availability: On Backorder
$14788
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$18800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: A2033FCBKIT
Samy's Part #: S-000917

Avenger black 40" century stand folding base and kit. This kit includes a 2.5" swivel grip and a 40" grip arm. A favorite among professional photographers, film makers and videographers everywhere. It is durable and designed to collapse flat for easy transport and storage. The leg design provides...
Availability: In Stock
$19588
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RS1150
Samy's Part #: S-004573

General purpose counterweight can be used with any light stand or boom. Includes "Hi-Vis" yellow stripes so it is easy to see in a darkened studio, prevents accidents. Sandbag has two pockets which can be filled with sand to produce the proper counterbalance effect (sand not included.) Also...
Availability: In Stock
$1995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 035RL
Samy's Part #: MANF035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
$2988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 20LBRH
Samy's Part #: S-043031

The STUFFT Sandbag 20 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard
...
$3095
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: D520LB
Samy's Part #: AVEND520B

This 40" C-Stand Extension Arm is capable of holding light heads, flags, reflectors, or a gobo.
$4488
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: B756040
Samy's Part #: MATTB756040
Includes FREE 6 In. Pin with Collar
Includes Free
Total Value: $16.00
Availability: In Stock
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA095
Samy's Part #: S-034620
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$2999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RS3122
Samy's Part #: S-018925

The RPS Studio Stud 1/4x20-Reversible Spigot allows a quick change from 1/4-20 male threads to 3/8 In. male threads. This 3/8 In. spigot features a flat side for each spigot side to ensure that it is secured in place.
Availability: In Stock
$1495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA094
Samy's Part #: S-034619

The Phototools Cold Shoe Umbrella Adapter fits onto almost any standard light stand. It has a swivel, an umbrella socket with a tightening screw and a shoe mount for mounting a flash. You can use the Cold Shoe Umbrella Adapter to aim your shoe mount flash and/or add an umbrella to create a...
Availability: In Stock
$2999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 756040
Samy's Part #: MATT756040
Includes FREE 6 In. Pin with Collar
Includes Free
Total Value: $16.00
Availability: On Backorder
$15280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: GP1001
Samy's Part #: S-054743

The GTX Studio Steel Male To 1/4 Female 3/8 Adapter is a small adapter used to convert a male 3/8 inch stud to a male ΒΌ x 20 stud. It is a very useful accessory for tripods, rigs and light stands. With this useful accessory in your kit, adaptation on the spot is always possible.
Availability: In Stock
$495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1051BAC
Samy's Part #: S-003024

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
$7688
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KG010412
Samy's Part #: S-045018

The Kupo Monitor Adapter Arm with Baby Receiver is robust adapter allows you to mount monitors up to 17.6 lbs onto any baby pin. This adapter is an ideal way of supporting your monitor on a light stand for mobility; the receiver is 5/8", making it compatible with a wide variety of grip gear. The...
Availability: In Stock
$9195
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 2002710
Samy's Part #: S-018672

The MICROgrip 1/4 in. to 5/8 in. Adapter is a pin used to convert 1/4 in. tapped threading to 5/8 in.
Availability: In Stock
$1400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DL-3103
Samy's Part #: S-051067

The versatility of the Dot Line Corp. Super Clamp For Seamless Backgrounds is equaled only by its durability and is used to clamp the seamless background papers. An item to have on hand at all times, the Super Clamp can be clamped to anything of 1.75 inches. The Super Clamp can also accept a s...
Availability: In Stock
$295
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$24000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 5015
Samy's Part #: WESC5015

The Westcott Adjustable Shoe Mount Umbrella Bracket allows the flash to be affixed to a standard light stand and shoot into the Mini Apollo or other brands of umbrellas.
$2990
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: DRACO
Samy's Part #: S-009845
6.5' Aluminum 3-Section Light Stand (Black)
Availability: On Backorder
$3999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 386B
Samy's Part #: MANF386B

The Manfrotto Nano Clamp is smaller in size than the popular Super Clamp and is even more versatile. Its reduced size is the most important plus, and at just 3.87 ounces, the Nano Clamp has a capacity of 12.13 pounds. The Nano Clamp has both 3/8” and ¼” attachments to make it compatible with...
Availability: In Stock
$2988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 299859
Samy's Part #: MATT299859

Matthews uses steel shot instead of lead to fill these black Cordura bags.
$6700
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: A5012
Samy's Part #: S-002103

The Avenger Roller Stand 12 with Folding Base (Chrome-plated/Black, 3.9 ft.)
 is a heavy duty, chrome-plated steel support that features a low base for extra stability, braking wheels, two risers and both a female 1/1/8" Junior receiver and a 5/8" Baby retractable stud. The legs fold up for transport...
Availability: In Stock
$22988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 540024
Samy's Part #: MATT540024

The ultimate positioning device. Mounts to 5/8" male or 1-1/8" female and is internally threaded 3/8-16 to support standard camera accessories. It rotates in all axis and will easily support up to 15 pounds. For Dots Fingers Flex Scrims and small light fixtures accepting 5/8" male. Add the Scrim...
Availability: In Stock
$4600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 15LB
Samy's Part #: S-024743

The Saddle Sandbag 15 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, inner shell is polypropylene.
  • Handles on both sides are heavy duty
...
Availability: In Stock
$2395
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 35LBRH
Samy's Part #: S-043033

The STUFFT Sandbag 35 lb (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. Sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard
...
$3695
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: D500LB
Samy's Part #: AVEND500B

20" C-Stand Extension Arm provides an extended grip point for scrims and flags.
Availability: In Stock
$3988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 5571
Samy's Part #: S-035326

The super durable and stable Westcott Illuminator Reflector Arm Extreme gives photographers the ability to mount their reflectors and boards effortlessly. With grip mounts located on both ends and a telescopic all-metal arm, the Illuminator Arm Extreme can precisely position the new Omega Reflector...
Availability: In Stock
$7990
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 101074
Samy's Part #: S-023795

The Profoto Stand Adapter Plus 16mm /5/8 inch is useful adapter to mount head on the stands for shooting. the adapter is made with high quality material and could be used on stands with ease.
Availability: In Stock
$4400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: LSBBOOM
Samy's Part #: PHOTLSBBOOM

The 3 section boom extends lights or props up to 5 feet away from your stand. It is strong enough to hang a small size softbox over head for a main or hairlight. The flexible boom adjusts from 5' to 7' by using either two or three sections. Taking this boom on location is a breeze with easy tr...
Availability: In Stock
$13995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 066
Samy's Part #: MANF066

The Manfrotto 066 Double Female Stud is a double ended 5/8" diameter stud that has a 1/4"-20 female thread on one side, and a 3/8" female thread on the other side. Use it to extend an existing threaded stud.
Availability: On Backorder
$450
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 025TM
Samy's Part #: S-037194

This Manfrotto 025TM 5.5 ft. Mini Super Boom with Column Stand (Black) has crank handles for swing and tilt of your mounted Baby fixture. It extends to a maximum of 5.5' (1.7 m) and has an adjustable 15 lb (6.8kg) counterweight. The Wheeled Stand Base is suitable for mounting light or heavy-weighted...
Availability: In Stock
$54988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: KS704811
Samy's Part #: S-047363

The Kupo 40 In. Riser C-Stand Turtle Base Kit (Black, 9.7 ft.) includes the Kupo Master C Stand with Turtle Base and 40" Grip Arm with Hex Stud. The 40 inches Riser C-Stand features a unique innovation in the world of C Stands that enables the still or moving image-maker of any skill level to...
Availability: On Backorder
$20600
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 549100
Samy's Part #: S-015480

The Matthews Diffusion Frame - 48x48 In. - 3/4 In. Square Tubing having flat edges of the Knife Blade frames which make them ideal for quick gel changes with 2 sided tape.
$12500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]