MFR Part #: YWD2525
Samy's Part #: S-034628
The Phototools Wheel Set with Brakes (Set of 3) are designed for square light stand leg ends that measure 20x20mm or 25x25mm. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the lever with your foot.
Availability: In Stock
$3900
MFR Part #: YA089
Samy's Part #: S-034618
The three-section Phototools Articulated Arm allows extra versatility, with a sliding extension system for precise positioning of a small camera, lighting fixtures, flags or other items even in awkward and tight spaces.
Both ends of the arm feature 5/8" pins; one with a 1/4"-20 female thread and...
Availability: In Stock
MFR Part #: YA047
Samy's Part #: S-034612
The Phototools Mini Clip Clamp is a versatile clamp that can accept a light head with a 5/8" receptor or a stud. It can also be mounted on 16mm extension arms.
Availability: In Stock
$1699
MFR Part #: YVSA3100
Samy's Part #: S-034604
The Phototools Junior Stand with Low Base is a heavy duty, chrome-plated steel and aluminum alloy support that features a low base for extra stability. Two risers allow this light stand to extend to a maximum height of 9.5'.
Features:
- Limited 1-Year Warranty
Availability: In Stock
MFR Part #: YA056
Samy's Part #: S-034614
The Phototools Adjustable Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.
Availability: In Stock
$1999
MFR Part #: YWA22
Samy's Part #: S-034622
This set of three Phototools locking casters are made for light stands with 22mm diameter legs. The casters slip over the end of the legs and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$2900
MFR Part #: YA051
Samy's Part #: S-034613
The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help...
Availability: In Stock
$499
MFR Part #: YA028
Samy's Part #: S-034610
The Phototools Rapid Adapter fits any light stand with a 5/8" top stud and will allow vertical or horizontal mounting of a light fixture, flash or camera with a standard 1/4" thread.
Availability: In Stock
$999
MFR Part #: YFPFMP1
Samy's Part #: S-043797
Availability: In Stock
MFR Part #: YA063S
Samy's Part #: S-034616
The Phototools 16mm Twin Grip Head is like having two grip heads in one. This double grip head allows multiple light control accessories (like scrims and flags) to be mounted in front of fixtures without the need for extra light stands.
Availability: More In Transit
$2999
MFR Part #: YFPFMP2
Samy's Part #: S-043801
Availability: In Stock
MFR Part #: YA095
Samy's Part #: S-034620
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$1999
MFR Part #: MC1007
Samy's Part #: S-053242
The Phototools 5/8" Snap-in Pin for Super Clamps (Black) has a 5/8" (16 mm) spigot (non-threaded) attachment one end, and the hexagonal Super Clamp type fitting on the other end. It can be used to connect a lighting fixture that has a 5/8" female receptor to a Super Clamp. It is constructed from...
Availability: In Stock
$699
MFR Part #: MC1054
Samy's Part #: S-053245
The Phototools Micro Clamp can grip to round or flat surfaces, as well as many other objects or shapes. It's reduced size and dual 3/8" and ¼" mounting holes give it extreme flexibility. Its strength is derived from a precision aluminum extrusion, it's high performance stick pads and an aluminum...
Availability: In Stock
$1299
MFR Part #: YA052
Samy's Part #: S-044776
The Phototools 3 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help...
Availability: In Stock
$799
MFR Part #: YA040
Samy's Part #: S-034609
The Phototools 4.5" Grip Head with Junior Pin and receiver is designed to allow a junior roller stand to securely support large butterfly and overhead frames.
Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
MFR Part #: MC1005A
Samy's Part #: S-053238
Snaps into a Super Clamp socket. Use it to mount cameras, directly or with a camera head. It has a 1/4" screw thread.
Availability: In Stock
$499
MFR Part #: YWA2020
Samy's Part #: S-034625
This set of three Phototools Wheels are 75mm diameter braked wheels with adapters for attaching to any light stand legs that are 22mm in diameter. The wheels slip onto the leg ends with sturdy metal housings and can be locked into place by stepping down on a locking lever, and released by lifting...
Availability: In Stock
$3900
MFR Part #: YA094
Samy's Part #: S-034619
The Phototools Cold Shoe Umbrella Adapter fits onto almost any standard light stand. It has a swivel, an umbrella socket with a tightening screw and a shoe mount for mounting a flash. You can use the Cold Shoe Umbrella Adapter to aim your shoe mount flash and/or add an umbrella to create a...
Availability: In Stock
$2999
MFR Part #: YWA25
Samy's Part #: S-034623
This set of Phototools locking casters are made for light stands with 25mm diameter legs. The casters slip over the end of the legs, and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$2900
MFR Part #: MC-1001B
Samy's Part #: S-053237
This brass Phototools Double End Stud Adapter can be screwed into either of the standard female mounting threads, 3/8" or 1/4" x 20. The main part of the stud is a standard 5/8" which will fit the mounting bracket of most light units.
Availability: In Stock
$799
MFR Part #: YA099
Samy's Part #: S-034621
The Phototools Quadruple Shoe Mount Bracket allows you to attach up to four flashes to one light stand. The bracket also features an umbrella socket which can be used with or without a shoot through or reflective umbrella.
If you are looking for increased overall power or a quicker recycling...
Availability: In Stock
$2999
MFR Part #: YA024
Samy's Part #: S-034601
The Phototools Stand Adapter allows you to convert a Junior 1-1/8 inch female receptor to a standard 5/8 inch male stud.
Availability: In Stock
$1599
MFR Part #: YA050
Samy's Part #: S-044775
The Phototools 1 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help...
Availability: In Stock
$399
MFR Part #: YA029
Samy's Part #: S-034611
The Phototools Rapid Adapter fits any light stand with a 5/8" top stud and will allow vertical or horizontal mounting of a light fixture, flash or camera that has a 3/8" thread.
Availability: In Stock
$999
MFR Part #: YA063B
Samy's Part #: S-034617
The Phototools 25mm Twin Grip Head is like having two grip heads in one. This double grip head allows multiple light control accessories (like scrims and flags) to be mounted in front of fixtures without the need for extra light stands.
Availability: In Stock
$1999
MFR Part #: MC1027A
Samy's Part #: S-053243
The Phototools 2.5" Grip Head with 5/8" Adapter has hundreds of functions. Unlike any other grip head, it utilises a series of washers for extra locking torque and the use of automotive-quality brake pad discs for extra security.
Availability: In Stock
$3699
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE