CONTACT US AT 800-321-4726
Light Stand Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: D700B
Samy's Part #: AVEND700B

Positions and holds reflector for hands free use.
Availability: In Stock
$5688
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
$4990
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 100850
Samy's Part #: S-009345

The Reflector Holder attaches directly to any Creative Light Stand (and most other brands), it holds the reflector in two positions to make sure it stays in place. And the adjustable arm ensures you can position the Reflector where needed, quickly and easily.
Availability: In Stock
$2900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: A10
Samy's Part #: S-038452

The Aputure A10 Articulating Magic Arm is a 10 inch multi-function magic arm, which features a hyper-stable and reliable locking system. It can be easily locked at all joint activities and fix in more position. The locking a10 can help you to experience a hyper-stable, but flexible support system....
Availability: In Stock
$4900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 088LBP
Samy's Part #: MANF088LBP

The Manfrotto 088LBP Adapter 1/4"-20 To 3/8" with  Flange converts 1/4" screw to 3/8".
Availability: In Stock
$1100
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 63302
Samy's Part #: S-043272

The Matthews 5/16 In. Knurled T-Knob is a replacement for one of the knobs that come with lighter weight stands without brass braking.
Availability: In Stock
$500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 427006
Samy's Part #: S-047399

The Matthews Suction Pump Cup with Camera Mount (6 In.) is used to install your camera on the car hood for action recording. Pump until the red marker disappears to create an amazing bond to nonporous surfaces such as car hoods and doors. The Matthews 6" diameter Suction Pump Cup has a 5/8" pin....
Availability: In Stock
$9500
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: KG010412
Samy's Part #: S-045018

The Kupo Monitor Adapter Arm with Baby Receiver is robust adapter allows you to mount monitors up to 17.6 lbs onto any baby pin. This adapter is an ideal way of supporting your monitor on a light stand for mobility; the receiver is 5/8", making it compatible with a wide variety of grip gear. The...
Availability: In Stock
$9195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350602-7
Samy's Part #: S-041448

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 122B
Samy's Part #: MANF122B

Extendable arm with double male spigot. Minimal height 48cm, maximal height 80cm.

Minimum Extension     21" (53 cm)
Maximum Extension     33.5" (85 cm)
Weight     1 lb (0.45 kg)
Attachment Size     5/8" male studs on each end, with 3/8" thread
Availability: In Stock
$2789
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YWD2525
Samy's Part #: S-034628

The Phototools Wheel Set with Brakes (Set of 3) are designed for square light stand leg ends that measure 20x20mm or 25x25mm. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the lever with your foot.
Availability: In Stock
$4000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 026
Samy's Part #: MANF026

The Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8".

FEATURES:
  • Bracket tilts
...
Availability: In Stock
$3419
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F805
Samy's Part #: AVENF805

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: In Stock
$1250
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3139P
Samy's Part #: S-023356

The RPS Studio 3/8 to 1/4-20 Adapter converts a 3/8 inch male threaded screw to a 1/4 inch-20 screw. The adapter is made with highly reliable and strong brass metal for long life.
Availability: In Stock
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F808
Samy's Part #: AVENF808

This Avenger F808 6.0 in. Baby Wall Plate is a 3.5 x 5.87 in. chrome-plated steel plate with a welded 5/8 in. Baby pin. The plate has eight anchor points for nails or screws, which are not included. This item may be used on a wall or free-standing as a floor-level light mount.
Availability: In Stock
$1695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 037
Samy's Part #: MANF037

The Manfrotto 037 Reversible Short Stud is a short stud made from brass that fits into the Super Clamp. It features a 3/8" screw at one end and a 1/4"-20 screw at the other end. Replaces old part number 2907.
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PH01200
Samy's Part #: S-048042

The Phottix Indra Battery Mount for Light Stand, the perfect way to affix your Indra500 Battery Pack to a light stand. The high-grade aluminum clamp opens to 30mm and is lined with slip resistant materials. Using the included elasticized strap, the Indra500 Battery Pack is held securely to...
Availability: In Stock
$7695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA095
Samy's Part #: S-034620
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1100
Samy's Part #: WESC1100

Illuminator Arm, has a double ball-joint for exact positioning. The clip mechanism firmly grips the product frame and fits on any stand with a standard fitting.
Availability: On Backorder
$7340
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350602-10
Samy's Part #: S-041447

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429626-7
Samy's Part #: S-045668

The Matthews Mini Matthelini Clamp Accessory Tip for Infinity Arm is specifically designed for Infinity Arm to increase the accessories attaching capabilities. It mounts to either end of the Infinity Arm, increasing its versatility and mounting options.

Features:
  • Specifically designed for I
...
Availability: In Stock
$5500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BLS1
Samy's Part #: S-048520

The ProMediaGear Rosette Adapter for Profoto B1/B2 Off-Camera Flash Mount Stud is a light Adapter for Profoto B1 B2 Broncolor Elichrom Standard Light-stand Mount Studs. Expand your lighting options with this rock solid rosette mount. Swing your flash forward or back and have it stay there. It...
Availability: On Backorder
$5995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350613
Samy's Part #: S-006345
Availability: In Stock
$9995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 186
Samy's Part #: MANF186

Manfrotto adapter 3/8" Female to 5/8" Male Stud and is 50mm Long.

* Replaces item # 3357
Availability: In Stock
$612
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 03614
Samy's Part #: MANF03614

The Manfrotto 036-14 Standard Stud features a standard 1/4"-20 screw on one end, and snaps into a Super Clamp socket on the other end. Use it to mount cameras, directly or with a camera head. Replaces old #2908.
Availability: In Stock
$475
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429232
Samy's Part #: MATT429232

90 degree pin / receiver. Weighs .9 pounds.
Availability: In Stock
$3095
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F1000
Samy's Part #: AVENF1000

Ideal for mounting small lights and camera systems onto flat, non-porous surfaces such as glass. A perfect tool for rigging car shoots.
Availability: In Stock
$6988
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0316P
Samy's Part #: DOTLDL0316P

This is a versatile bracket that will fit on almost any light stand. It includes two removeable, reversible studs to adapt to light stands with top studs smaller than the standard 5/8 inch. It also includes a shoe mount, which will accept virtually any shoe-mount flash unit.
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3090P
Samy's Part #: S-016998

The RPS Triple Flash/Umbrella Mount is a great way to utilize your on camera flash units to create a lightweight light source that is ideal for the road. The mount features 3 adjustable locking flash shoes with a central umbrella receptacle. A 1/4"-20 tap in the bottom of the mount accepts...
Availability: In Stock
$2495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG005512
Samy's Part #: S-015128

The Kupo G005512 baby 5/8 inch (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (G900412) or 4 Way Clamp (G900712) to accept any light fixture or accessory with a baby (5/8 inch - 16mm) receiver. The G005512 is 4.25 inch (108mm) in length.
Availability: In Stock
$1195
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 409108
Samy's Part #: S-018494

The Butterfly/Overhead Hollywood Frame - 8x8 ft - 1 In. Square Tubing is a useful and beautiful quality farme by Mathews. Matthews offers a wide variety of frames to hold your overheads and butterflys. Hollywood Frames feature corners that contain all tubes in a captie state. No more loose pieces...
Availability: In Stock
$55840
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 350602-8
Samy's Part #: S-041449

The Matthews MICROgrip Rod (12 In.) are used to create a highly flexible mount that will allow the photographer to get the on-camera light up from the camera body with ease and adjustability. The creative photographer adds rods to create dramatic and creative lighting effects with the on-camera...
Availability: In Stock
$1300
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0318P
Samy's Part #: S-002971
This adapter accepts umbrellas with shafts up to 3/8” and securely locks it in place via a retaining spring and locking screw. It can be mounted on light stands with studs up to 5/8”. This adapter tilts a full 180° and securely locks via a saw-tooth design. The adjustable foot accepts different...
Availability: On Backorder
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 387102
Samy's Part #: S-015942

The Matthews Wheel Set for Kit Stands is a very useful product from Matthews. It  is a set of 3 wheels that can also be attached with some other kit stands such as 387402, B389787, B389788, and B387490.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 681013
Samy's Part #: MATT681013

This arm features the strongest and most popular Grip Head in the industry. Guaranteed to hold, it will not slip. Plates feature two holes 3/8 and 5/8", eliminating confusion. Castings offer positive lock in all directions.
Availability: In Stock
$4640
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YWA2020
Samy's Part #: S-034625

This set of three Phototools Wheels are 75mm diameter braked wheels with adapters for attaching to any light stand legs that are 22mm in diameter. The wheels slip onto the leg ends with sturdy metal housings and can be locked into place by stepping down on a locking lever, and released by lifting...
Availability: In Stock
$7999
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]