CONTACT US AT 800-321-4726
Light Stand Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 302
Samy's Part #: WESC302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
$4990
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0318P
Samy's Part #: S-002971
This adapter accepts umbrellas with shafts up to 3/8” and securely locks it in place via a retaining spring and locking screw. It can be mounted on light stands with studs up to 5/8”. This adapter tilts a full 180° and securely locks via a saw-tooth design. The adjustable foot accepts different...
Availability: On Backorder
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 100850
Samy's Part #: S-009345

The Reflector Holder attaches directly to any Creative Light Stand (and most other brands), it holds the reflector in two positions to make sure it stays in place. And the adjustable arm ensures you can position the Reflector where needed, quickly and easily.
Availability: In Stock
$2900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YWA2020
Samy's Part #: S-034625

This set of three Phototools Wheels are 75mm diameter braked wheels with adapters for attaching to any light stand legs that are 22mm in diameter. The wheels slip onto the leg ends with sturdy metal housings and can be locked into place by stepping down on a locking lever, and released by lifting...
Availability: In Stock
$7999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 122B
Samy's Part #: MANF122B

Extendable arm with double male spigot. Minimal height 48cm, maximal height 80cm.

Minimum Extension     21" (53 cm)
Maximum Extension     33.5" (85 cm)
Weight     1 lb (0.45 kg)
Attachment Size     5/8" male studs on each end, with 3/8" thread
Availability: On Backorder
$2789
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 8191
Samy's Part #: MANF8191

The Manfrotto Hydrostatic Arm features a new locking mechanism. A ball pivot encapsulated in a hydraulic oil-filled chamber enables the arm to be locked in position with only a gentle turn of the knob. This is accomplished by the fact that the oil surrounds the ball joint and applies pressure...
Availability: In Stock
$18488
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: YA099
Samy's Part #: S-034621

The Phototools Quadruple Shoe Mount Bracket allows you to attach up to four flashes to one light stand. The bracket also features an umbrella socket which can be used with or without a shoot through or reflective umbrella.

If you are looking for increased overall power or a quicker recycling...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: F1100
Samy's Part #: AVENF1100

The Avenger F1100 6.0 in. Pump Cup with Fixed Baby Pin uses a 6.0 in. (15.24 cm) suction cup to adhere to onto flat, non-porous surfaces such as glass. A perfect tool for rigging car shoots with a fixed baby pin for added stability. It features a fixed 5/8 in. pin and is best suited for holding...
Availability: In Stock
$4400
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: F1000
Samy's Part #: AVENF1000

Ideal for mounting small lights and camera systems onto flat, non-porous surfaces such as glass. A perfect tool for rigging car shoots.
Availability: In Stock
$6988
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 101074
Samy's Part #: S-023795

The Profoto Stand Adapter Plus 16mm /5/8 inch is useful adapter to mount head on the stands for shooting. the adapter is made with high quality material and could be used on stands with ease.
Availability: In Stock
$4300
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG010412
Samy's Part #: S-045018

The Kupo Monitor Adapter Arm with Baby Receiver is robust adapter allows you to mount monitors up to 17.6 lbs onto any baby pin. This adapter is an ideal way of supporting your monitor on a light stand for mobility; the receiver is 5/8", making it compatible with a wide variety of grip gear. The...
Availability: In Stock
$8275
Original Price: $91.95
instant Rebate(s): $9.20
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 186
Samy's Part #: MANF186

Manfrotto adapter 3/8" Female to 5/8" Male Stud and is 50mm Long.

* Replaces item # 3357
Availability: On Backorder
$612
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 409108
Samy's Part #: S-018494

The Butterfly/Overhead Hollywood Frame - 8x8 ft - 1 In. Square Tubing is a useful and beautiful quality farme by Mathews. Matthews offers a wide variety of frames to hold your overheads and butterflys. Hollywood Frames feature corners that contain all tubes in a captie state. No more loose pieces...
Availability: In Stock
$55840
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 5140
Samy's Part #: S-028750

Multi-light shooting has significant impact on the quality imaging for professional photographers during weddings and events. To fulfill the photographer's need Westcott Speedlite ProGrip makes off camera lighting a snap. The extremely versatile and super comfortable Speedlite ProGrip is a dream...
Availability: In Stock
$3490
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YWA22
Samy's Part #: S-034622

This set of three Phototools locking casters are made for light stands with 22mm diameter legs. The casters slip over the end of the legs and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$4999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 175F1
Samy's Part #: MANF175F

This is a Manfrotto 175F Justin Spring Clamp which clamps onto pipes up to 1.6" in diameter, or stands or arms that have a 5/8 in top, or 3/8 in thread. It also features a cold flash swivel shoe for attaching a shoe-mount flash.

  • Lateral Tilt: -90° / +90° tilt range
  • Length: 6.14 in
  • Material:
...
Availability: In Stock
$6099
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: A2033FKIT
Samy's Part #: S-003086

This Avenger A2033FKIT Century Grip Arm Kit is constructed of chrome steel. This stand provides solid support for your light heads, reflectors or gobos. This grip kit includes a D520L 40" (1 m) extension arm and D200 2.5" grip head which work together to act as a boom or gobo holder.

FEATURES:...
Availability: In Stock
$19588
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: L20005271
Samy's Part #: ARRI853276

Arri Safety Cable for all Arri lights less than 2.0 lbs.
Availability: In Stock
$935
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 026
Samy's Part #: MANF026

The Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8".

FEATURES:
  • Bracket tilts
...
Availability: On Backorder
$3419
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 427006
Samy's Part #: S-047399

The Matthews Suction Pump Cup with Camera Mount (6 In.) is used to install your camera on the car hood for action recording. Pump until the red marker disappears to create an amazing bond to nonporous surfaces such as car hoods and doors. The Matthews 6" diameter Suction Pump Cup has a 5/8" pin....
Availability: In Stock
$9500
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 088LBP
Samy's Part #: MANF088LBP

The Manfrotto 088LBP Adapter 1/4"-20 To 3/8" with  Flange converts 1/4" screw to 3/8".
Availability: On Backorder
$1100
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: A10
Samy's Part #: S-038452

The Aputure A10 Articulating Magic Arm is a 10 inch multi-function magic arm, which features a hyper-stable and reliable locking system. It can be easily locked at all joint activities and fix in more position. The locking a10 can help you to experience a hyper-stable, but flexible support system....
Availability: In Stock
$4900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3104
Samy's Part #: DOTLRS3104P

Accepts umbrella reflector with 3/8" stem or smaller, can be mounted on tripod or stands with provided 1/4"-20, 3/8" or 5/8" adapter. Designed to turn a portable flash unit into a studio lighting unit. All metal construction. Tilt-lock is saw-tooth design for secure locking. Unit features an i...
Availability: In Stock
$3395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3138P
Samy's Part #: S-023355

The new RPS Studio Light Stand Adapter 1/4-20 to 3/8 Inch Dual Male Spigot is solid brass featuring 2 male 1/4-20 threads and can be mounted via any 5/8 inch receiver. Total length is 1-9/16 inches.

Availability: On Backorder
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YWA25
Samy's Part #: S-034623

This set of Phototools locking casters are made for light stands with 25mm diameter legs. The casters slip over the end of the legs, and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$4999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0316P
Samy's Part #: DOTLDL0316P

This is a versatile bracket that will fit on almost any light stand. It includes two removeable, reversible studs to adapt to light stands with top studs smaller than the standard 5/8 inch. It also includes a shoe mount, which will accept virtually any shoe-mount flash unit.
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3139P
Samy's Part #: S-023356

The RPS Studio 3/8 to 1/4-20 Adapter converts a 3/8 inch male threaded screw to a 1/4 inch-20 screw. The adapter is made with highly reliable and strong brass metal for long life.
Availability: In Stock
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA095
Samy's Part #: S-034620
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B119738
Samy's Part #: MATTB119738

The Matthews Pivoting Yoke for Matthboard (Black) is a positive lock off yoke made to hold Expendable Reflectors, gives the same feel and look as a conventional hard board yoke.

Features:
  • Gives the same look as conventional hard board yoke
  • Made to hold expendable reflectors
Availability: In Stock
$12880
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BLSAT
Samy's Part #: S-048517

The must have ProMediaGear 5/8 In. Stainless Steel Light Spigot Adapter for any photographer and videographer with ΒΌ top mounted screw. The 5/8" Stainless Steel Light Spigot mounts from the top down with a 1/4-20 screw allowing the adapter to be bolted onto cages, rigs, handles and countless other...
Availability: In Stock
$2495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BLS1
Samy's Part #: S-048520

The ProMediaGear Rosette Adapter for Profoto B1/B2 Off-Camera Flash Mount Stud is a light Adapter for Profoto B1 B2 Broncolor Elichrom Standard Light-stand Mount Studs. Expand your lighting options with this rock solid rosette mount. Swing your flash forward or back and have it stay there. It...
Availability: In Stock
$5995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 025BSL
Samy's Part #: MANF025BSL

The Manfrotto Black Super Boom features coaxial geared controls at the end of the boom, which permits movement a full 180&deg. It extends to 8.8' (2.7 m). This item replaces old catalog #3391 (BO3091B). It is a boom only

FEATURES:

  • Dual cranks provide remote control over fixture pan
...
Availability: On Backorder
$42999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA094
Samy's Part #: S-034619

The Phototools Cold Shoe Umbrella Adapter fits onto almost any standard light stand. It has a swivel, an umbrella socket with a tightening screw and a shoe mount for mounting a flash. You can use the Cold Shoe Umbrella Adapter to aim your shoe mount flash and/or add an umbrella to create a...
Availability: On Backorder
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 249563
Samy's Part #: S-041938

Whether you're using the new Slider Stand with the Matthews Slider, Dana Dolly System, Rig Wheels Kit or even a large light, the Slider Stand Wheel Set is a sturdy and reliable solution to keep your equipment portable. Just like other Matthews Wheels, the Slider Stand Wheels track straight, which...
Availability: In Stock
$20400
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 350602-8
Samy's Part #: S-041449

The Matthews MICROgrip Rod (12 In.) are used to create a highly flexible mount that will allow the photographer to get the on-camera light up from the camera body with ease and adjustability. The creative photographer adds rods to create dramatic and creative lighting effects with the on-camera...
Availability: In Stock
$1300
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG005512
Samy's Part #: S-015128

The Kupo G005512 baby 5/8 inch (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (G900412) or 4 Way Clamp (G900712) to accept any light fixture or accessory with a baby (5/8 inch - 16mm) receiver. The G005512 is 4.25 inch (108mm) in length.
Availability: In Stock
$1075
Original Price: $11.95
instant Rebate(s): $1.20
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]