CONTACT US AT 800-321-4726
Lens Hoods
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 4125
Samy's Part #: NIKO4125

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

The "petal" shape of this lens...
Availability: In Stock
$1495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9529B001
Samy's Part #: S-032396

The Canon EW-73C Lens Hood For 10-18 mm STM Lens is especially designed for the Canon EF-S 10-18mm f/4.5-5.6 IS STM lens and minimizes flare by deflecting stray light from entering lens. It provides protection to the lens from accidental impacts, bumps, and scratching.

Features:
  • For EF-S 10-18mm
...
Availability: In Stock
$2795
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 4119
Samy's Part #: NIKO4119

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$3695
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 6321B001
Samy's Part #: S-022226

The Canon Lens Hood EW-83L is designed for the Canon EF 24-70mm f/4L IS USM Lens. The hood is made to keep away undesired side lighting from entering the lens by extending and shading the end of the lens. It also gives extra protection from accidental impact.
$6495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 4685
Samy's Part #: NIKO4685

Designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens.

Twist-lock mounting for extra security.

Adds extra protection from accidental impact.
Availability: In Stock
$1995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 4991
Samy's Part #: S-028496

The Nikon HB-68 Bayonet Lens Hood minimizes stray light and reduces lens flare and comes with the AF-S NIKKOR 58mm f/1.4G lens, and is designed to keep flare from entering the lens, when shooting. It is also available as a replacement item.
Availability: In Stock
$3295
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 4898
Samy's Part #: S-046080

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster ES-68 Replacement Lens Hood for Canon 50mm 1.8 STM provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare...
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 2660A001
Samy's Part #: CANO2660A002

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Availability: On Backorder
$2499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 4101
Samy's Part #: NIKO4101

Screws onto the front of the lens.

Metal type available for extra strength.

Rubber type folds back over the lens when not in use.
$4895
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 9446A001
Samy's Part #: CANO9446A001

Canon Lens Hood EW-83G for EF 28-300mm f/3.5-5.6L IS USM
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 16144523
Samy's Part #: S-011376

The LH-X100 Lens Hood with Adapter Ring from Fuji is for the X100 camera. This metal adapter ring replaces the lens ring that comes with the camera and bayonet mounts with the lens hood. In addition to bayoneting with the hood, it can also be used for mounting 49mm filters.

The metal lens hood...
Availability: In Stock
$6999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 0569C001
Samy's Part #: S-039434

The Canon Lens Hood & Filter Adapter Kit includes the Filter Adapter FA-DC67B and Lens Hood LH-DC100 for the PowerShot G3 X. The filter adapter allows you to mount 67mm filters such as UV filters, neutral density (ND) filters, and polarizing filters. The lens hood helps prevent stray light from...
Availability: In Stock
$4495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 8268B001
Samy's Part #: S-024317
The Canon EW-63C Lens Hood for EF-S 18-55mm f/3.5-5.6 IS STM Lens is designed to prevent stray light from entering the lens in order to keep unwanted glare from affecting your photographs.
Availability: In Stock
$2288
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 538
Samy's Part #: NIKO538

Designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens.

Adds extra protection from accidental impact.

Rubber type folds back over the lens when not in use.

For 50mm f/1.2 AI-S, 50mm f/1.4, 1.8 D-AF & 58mm f/1.2 Noct AI-S Lenses
Availability: In Stock
$1699
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 518
Samy's Part #: NIKO518

A lens hood is an essential part of your Nikon system. When the rays from a strong light source, such as the sun, strike the front surface of your lens at a shallow angle, they cause flare which can rob your photos of contrast and color saturation.

Lens and filter hoods act to reduce stray...
$3995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: DL0466P
Samy's Part #: DOTLDL0466P

Black rubber lens hood is collapsible. Folds back over lens for storage. Inside front thread allows for filters or accessories to be attached.
Availability: On Backorder
$699
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 2676A001
Samy's Part #: CANO2676A002

A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door...
Availability: In Stock
$2500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 8582B001
Samy's Part #: S-027758

The ET-63 Lens Hood for EF-S 55-250mm f/4-5.6 IS STM Lens prevents unwanted stray light from entering the STM lens by extending its front element. It also gives extra protection against impact and provides shade for best imaging results. The hood is made with high quality material for durability...
Availability: In Stock
$2695
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 4183
Samy's Part #: S-046192

The Promaster 67mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: WALH
Samy's Part #: LEEWALH

Lee Wide Angle Lens Hoods have much larger bellows to allow for effective shading on wide or particularly large lenses, where the use of standard hoods could cause vignetting. They fit directly onto the lens via an adaptor ring, or onto the filter holder. The wide angle hood is available in standard...
Availability: In Stock
$27500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 1693B001
Samy's Part #: CANO1693B001

The Canon ES-78 Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the hood is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1365665
Samy's Part #: S-001098

The Lens Shade for 21mm and 25mm ZM Rangefinder Lenses are designed to match the specific focal length of the lens and it was designed to prevent unwanted stray light from entering the lens. Also extra protection from accidental impact.
$8400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 4155
Samy's Part #: S-046189

The Promaster 52mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 3022
Samy's Part #: S-046101

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster HB-32 Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$1450
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 4337
Samy's Part #: NIKO4337

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: On Backorder
$1795
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 1365666
Samy's Part #: S-013450

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
$8400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 8001112
Samy's Part #: OPTE8001112

The OpTech Hood Hat (Small, Black) is designed to fit a lens and shade with a diameter from approximately 3.25-3.5". Simply placing the Hood Hat onto the front of the hood while in place will provide just as much protection for the critical front lens elements as would be provided by a traditional...
Availability: In Stock
$800
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 12523
Samy's Part #: LEIC12523
Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

Dedicated lens hoods are designed...
Availability: In Stock
$21500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 2055
Samy's Part #: S-046196

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 52mm Universal Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 12549
Samy's Part #: LEIC12549

Lens Hood for 50mm f/2.8 Chrome M-Lens (#11823) (Replacement)
Availability: In Stock
$7595
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 2655A001
Samy's Part #: CANO2655A002

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Availability: In Stock
$2299
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 7078
Samy's Part #: S-046082

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster ET-63 Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 6189
Samy's Part #: S-046088

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster EW-63C Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$2995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 4994
Samy's Part #: S-031215

The Nikon HB-69 Bayonet Lens Hood is designed to keep flare from entering the lens, when shooting. It minimizes stray light and reduces lens flare.

Compatible With: AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II Lens
Availability: In Stock
$2495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 5185B001
Samy's Part #: S-022225

Hoods offer several benefits to the photographer. The Canon EW-72 Lens Hood for EF 35mm f/2.0 IS USM Lens shades the lens from stray light that may result in an unwanted discoloration or hazing of the image, or the appearance of lens flare. Shading your lens helps improve contrast and image quality....
Availability: On Backorder
$5400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 7442
Samy's Part #: S-046186

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster HB-69 Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$1995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]