CONTACT US AT 800-321-4726
Lens Hoods
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 4941
Samy's Part #: NIKO4941

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$1795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 16144523
Samy's Part #: S-011376

The LH-X100 Lens Hood with Adapter Ring from Fuji is for the X100 camera. This metal adapter ring replaces the lens ring that comes with the camera and bayonet mounts with the lens hood. In addition to bayoneting with the hood, it can also be used for mounting 49mm filters.

The metal lens hood...
Availability: In Stock
$6999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9532B001
Samy's Part #: S-047509

The Canon EW-77B Lens Hood designed to prevent stray light from entering the lens, in order to keep unwanted glare from affecting your photographs. The hood is specifically designed for the EF 35mm f/1.4L II USM lens.

Features:
  • Prevent stray light from entering the lens
  • Designed specifically
...
Availability: In Stock
$5495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: WALH
Samy's Part #: LEEWALH

Lee Wide Angle Lens Hoods have much larger bellows to allow for effective shading on wide or particularly large lenses, where the use of standard hoods could cause vignetting. They fit directly onto the lens via an adaptor ring, or onto the filter holder. The wide angle hood is available in standard...
Availability: In Stock
$27500
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 4972
Samy's Part #: S-019239

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$4995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4428B001
Samy's Part #: S-008754

The ET-73B Canon Lens Hood is used for Canon Digital SLRs. It prevents unwanted light from straying into the lens that creates flare and ghosting that causes image degradation. The lens hood is optimally shaped to match the compatible lenses.
Availability: In Stock
$5995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2676A001
Samy's Part #: CANO2676A002

A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door...
Availability: In Stock
$2500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 0575C001
Samy's Part #: S-038651

The ES-68 Lens Hood from Canon is designed to fit the Canon EF 50mm f/1.8 STM Lens. Lens hoods offer protection from unwanted light entering your lens and causing glare, especially when shooting toward your light source. They also offer a degree of physical protection for your lens against...
Availability: In Stock
$2495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4124
Samy's Part #: NIKO4124

The HB-31 bayonet-type Lens Hood greatly reduces stray light.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4958
Samy's Part #: S-007649

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$4195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL-2158
Samy's Part #: S-043115

The "petal" shape of the Dot Line 58mm Snap-On Lens Hood maximizes the amount of hood coverage with the minimum amount of weight and hood area. In addition, the design of this hood allows it to be reversed and stored on the lens, when not in use. It is also designed to accept lens caps.

Lens...
Availability: In Stock
$1999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4162
Samy's Part #: S-046190

The Promaster 55mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2631A001
Samy's Part #: CANO2631A002

ET-54 Lens Hood for EF 55-200mm & EF 80-200mm Zoom Lenses

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping...
Availability: In Stock
$2495
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 1693B001
Samy's Part #: CANO1693B001

The Canon ES-78 Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the hood is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$3900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PH50570
Samy's Part #: S-024697

The Phottix EW-78D Lens Hood provides the ultimate protection. Manufactured from non breakable plastic. Substitute for Canon EW-78D lens hood, which is designed for Canon EF 28-200mm USM and 18-200mm IS.

Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
$700
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4614
Samy's Part #: NIKO4614

HB-7 Hood for AF 80-200mm f2.8D Lens
Availability: In Stock
$3995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3022
Samy's Part #: S-046101

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster HB-32 Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$1450
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2069
Samy's Part #: S-046198

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 58mm Universal Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: OCDELH1
Samy's Part #: S-032143

Improve the quality of your GoPro camera lens with the help of the Oncore Design Eclipse Lens Hood! The Eclipse Lens Hood enables you to shoot footage while facing a light source as well as preventing light from coming into the lens at extreme angles. The Eclipse Lens Hood helps eliminate unwanted...
Availability: In Stock
$2499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 14476
Samy's Part #: S-000930

This Leica Lens Hood Cover is the replacement cap that goes over the optional lens hood made for the 35mm and 50mm f/2.5 M lenses.
Availability: In Stock
$3295
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 0776B001
Samy's Part #: CANO0776B001

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Availability: In Stock
$4377
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1365667
Samy's Part #: S-013451

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$8400
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2083
Samy's Part #: S-046200

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 67mm Universal Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: HA92967P
Samy's Part #: DOTLHA92967P

A professional quality Lens Hood that adjusts from wide-angle to normal to telephoto. Suitable for lenses from 24mm to 210mm focal lengths. Ideal for zoom lenses. Material is acid resistant, temperature insensitive. Internal baffles absorbs all stray light reflections. Inside thread for filters.
Availability: In Stock
$3395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4337
Samy's Part #: NIKO4337

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$1795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 044011004000
Samy's Part #: S-015792

The Leica Hood for 50mm f/1.4 for M Lens is replacement viewing hood for the lens.
Availability: In Stock
$26200
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 4105
Samy's Part #: S-036327
This Nikon HB-73 Bayonet Lens Hood shields the front element of your AF-S NIKKOR 300mm f/4E PF ED VR, keeps away the excess light and prevents flare.

It protrudes from the end of the lens and offers extra protection against minor impact.

Fits the Nikkor 300mm f4 Lens 
Availability: In Stock
$6195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 8254
Samy's Part #: S-046103

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster HB-39 Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$3500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: OCDELH3H
Samy's Part #: S-032518

Improve the quality of your GoPro camera lens with the help of the Oncore Design Eclipse Lens Hood! The Eclipse Lens Hood enables you to shoot footage while facing a light source as well as preventing light from coming into the lens at extreme angles. The Eclipse Lens Hood helps eliminate unwanted...
Availability: In Stock
$3000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 8268B001
Samy's Part #: S-024317
The Canon EW-63C Lens Hood for EF-S 18-55mm f/3.5-5.6 IS STM Lens is designed to prevent stray light from entering the lens in order to keep unwanted glare from affecting your photographs.
Availability: On Backorder
$2288
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4944
Samy's Part #: NIKO4944

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4155
Samy's Part #: S-046189

The Promaster 52mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2055
Samy's Part #: S-046196

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 52mm Universal Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2587
Samy's Part #: S-046212

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 67mm Wide Angle Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting...
Availability: In Stock
$200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2637A001
Samy's Part #: CANO2637A002

Lens hoods are designed to prevent any stray light from entering the lens. They do this by extending and shading the end of the lens. When using a lens hood, the end of the lens is extended, so you also get the added benefit of some extra protection from any accidental impact.

Dedicated...
Availability: In Stock
$2195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1377C001
Samy's Part #: S-045563

The Canon ES-22 Lens Hood designed to prevent stray light from entering the lens, in order to keep unwanted glare from affecting your photographs. Designed specifically for the EF-M28mm f/3.5 Macro IS STM lens, it prevents the white ring on the front of the lens from being reflected back into...
Availability: In Stock
$2795
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]