CONTACT US AT 800-321-4726
HDSLR Camera Support Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: DMW-XLR1
Samy's Part #: S-050018

Record audio professionally with the Panasonic XLR Professional Microphone Adaptor Dual Terminal that is compatible with Panasonic LUMIX GH5.  It provides two analog XLR jack terminals and can support output of: Digital, I2S format, Fs = 48 k or 96 kHz, Bit depth of 16 or 24 bit.  An integrated...
Availability: On Backorder
$39799
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DMWSFU1VLOG
Samy's Part #: S-041094

In response to the demand from the film production market, log video recording (V-Log L) is now available for the LUMIX GH4, and offers exceptional flexibility as well as wider dynamic range for color grading in post-production process. V-Log / V-Log L were developed to feature similar charact...
Availability: In Stock
$9999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 7201
Samy's Part #: S-051093

The Promaster GH25 Professional Gimbal Head is designed with meticulous precision for the finest shooting experience. It includes two heads, which can be used separately or together. The GH25 Gimbal Head is an excellent solution for balancing your camera and a long lens. The PH25 Panoramic Head...
Availability: In Stock
$29995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: VATJT1SET
Samy's Part #: S-031403

Unlike many portable jibs, the new Varavon TILT JIB T1 3.3 ft. MiniJIB can actually tilt the camera when performing vertical movements to keep your subject in frame. This all accounts to a slightly heavier setup than the other Carbon Fiber Mini Cranes, but the Varavon Tilt Jib is strong enough...
Availability: In Stock
$26775
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DDMOUNT-AC-QKRLS-P
Samy's Part #: S-013463

The Delkin Devices Fat Gecko DSLR Camera Mount Quick Release Plate mounts to your camera's 1/4"-20 tripod accessory receiver then quickly slips into the Delkin Devices Quick Release base it is dedicated to. The plate, which supports up to 6.6 lb, is fabricated from anodized aluminum with anti-slip...
Availability: In Stock
$979
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 804705
Samy's Part #: S-007203

The AC7 RF Shield for FlexTT5 solves the problem of limited performance of the FlexTT5 radio transceiver when operated using the Canon 580EX, 580EX II and 430EX flashes, caused by interference emanating from the flashes.

The AC7 is a hard plastic shield with a special RF coating that effectively...
Availability: In Stock
$3395
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: CIMODO01
Samy's Part #: S-038786

Say goodbye to cables, chargers, batteries, belts, and programming. Say hello to Modo. What is Modo? The Cinevate Inc Modo Motion Time Lapse System is affordable, effortless, and precise motion timelapse for the Duzi Slider. The modo is a mechanically driven add-on module for Duzi camera sliders...
Availability: In Stock
$16900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: ELE-15RDA
Samy's Part #: S-047711

The ikan 15mm Rod Adapter has several useful functions, starting with its ability to mount accessories with ΒΌ"-20 threaded studs directly to 15mm rods. Secondly, by combining the ELE-15RDA with the Cheese Stick Jr., multiple right angle mounting points are made available for adding for batteries,...
Availability: In Stock
$2495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: TB1103MC
Samy's Part #: S-026698

The TetherBlock MC is designed to help protect your cameras data connection port whether shooting on a tripod or hand held. Camera data ports are fragile. One pull from a data cable connected to a camera can cause expensive camera repair and a camera out of service on an important shoot!

TetherBlock...
Availability: On Backorder
$8995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YSRP01B
Samy's Part #: S-034629

The Phototools Gear Ring for Follow Focus is a rubber gear with a standard pitch of 0.8 and a maximum diameter of 4.1".

This gear ring ensures that the follow focus gear has a slip-free grip on the focus ring of your camera lens.
Availability: On Backorder
$999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 00320001
Samy's Part #: S-051139
FREE Link Cable with purchase. To qualify, add Link Cable to cart.

The Syrp Genie Mini Panning Motion Control System in your pocket! The Genie mini is an extremely easy-to-use device to create smooth panning motion time-lapse or real-time video. Wirelessly connect to the Genie Mini using the Syrp Genie App for quick setup and simple control! Simply attach the...
Availability: In Stock
$24900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RMX1
Samy's Part #: S-028331

RigMount magnetic camera mounts are a new approach to portable camera support for both photo and video cameras. With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount...
Availability: In Stock
$22500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3075
Samy's Part #: S-021106

Already own one of the Dinkum Systems ActionPod mounts or any other device with a 1/4-20" thread? Make your gear do double duty with the 1/4-20 to 3/8-16 in. Adapter Screw. Allows fast and simple conversion from a camera mounting device to a microphone shock mount.  Standard 1/4-20" thread converts...
Availability: In Stock
$535
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: GLGARDNK
Samy's Part #: S-007334
The Genus GARD-NK Nun's Knickers Do-nut Adaptor Ring (so called as an industry tongue-in-cheek nick-name) is a do-nut ring fitted with a black-out fabric cover that wraps around the barrel of your lens to block out any light completely. The 105mm plastic ring fits snugly into your matte box and...
Availability: In Stock
$3900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: OSMOPART47
Samy's Part #: S-045239

The DJI Osmo Z-Axis for Zenmuse X3 Gimbal And Camera can significantly reduce vertical shaking from natural arm movements when walking or jogging. It is compatible with the Zenmuse X3 gimbal and camera.

Features:
  • Significantly reduce vertical shaking
  • Compatible with the Zenmuse X3 gimbal and
...
Availability: In Stock
$12900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DDMOUNT-AC-QKRLS
Samy's Part #: S-013462


The Delkin Devices Fat Gecko DSLR Camera Mount Quick Release Accessory features a quick release base plate that fastens to your DSLR camera. Then, the base plate slides into the adapter plate, which features a push button key to lock the camera into place. This simple push and release function

...
Availability: On Backorder
$2879
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: STMNTV2
Samy's Part #: S-021206

The JAG35 DSLR Stand V2 allows you to mount any of the small bodied DSLR cameras in the market to industry standard 15mm rails.

There is a saying that goes "if it ain't broke don't fix it" well at JAG35 we believe that the broken english in this old proverb needed fixing, our new motto is "if its...
Availability: On Backorder
$8999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: ATOMACCKT1
Samy's Part #: S-052282

The Atomos Accessory Kit for Shogun/Ninja Inferno & Flame is the ideal companion to your Atomos Flame or Inferno Series monitor recorder. Providing all the accessories for your devices including 2x 5200mAh battery, fast charger, Dtap to DC cable, 4x Master Caddy, USB drive docking station and...
Availability: On Backorder
$29500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0391
Samy's Part #: S-028613

The new Dot Line Corp. 10 SS Articulating Arm 10 inches Stainless Steel Articulating Arms support twice the weight (over 5 lbs.) of the standard articulating arms on the market today making them the toughest articulating arms. A single oversized knob locks all of the balls and joints of the arm...
Availability: In Stock
$4999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: Z-QRR
Samy's Part #: S-043052

The QR Riser With Gorilla Plate V2 raises your camera to a height compatible with matteboxes. It supports DSLRs and other cameras with low-lens positioning relative to the camera body. It also provides a quick-release for your camera. Includes Gorilla Plate V2 and Gorilla Tripod Dock. Mount your...
Availability: On Backorder
$10900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 305
Samy's Part #: S-032272

The D/Focus System Starter Bundle for Blackmagic Cinema Camera with D|Rails Baseplate and D|Focus Follow Focus is designed to add precise focus control to your Blackmagic Cinema Camera. It features the D|Rails BMCC Baseplate with 8" LWS 15mm rods, the D|Focus v4 Follow Focus, and a D|Gear Follow...
Availability: In Stock
$34995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3204
Samy's Part #: S-021092

The Dinkum Systems PRO Screw Mount Lens Shade / French Flag Assembly provides shade protection from stray light with a 10 x 6.5" aluminum flag. The flag is attached on a 13-link, 14" flexible arm that secures to the camera by a standard 1/4"-20 screw base. The arm is length-adjustable by adding...
Availability: In Stock
$5845
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 76
Samy's Part #: S-041781

Unlock the full potential of your DJI Ronin-m with the D/Focus Systems D-Mount! This universal mounting plate allows you to mount your Ronin-m to a tripod, car, quadcopter, helicopter, drone, motorcycle, airplane, or anything else you can imagine. Simply mount the D|Mount Ronin-m to your object...
Availability: In Stock
$16499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: OGTRACKEND
Samy's Part #: S-031381

The Dana Dolly Original Track End works with any standard size pipe from 1 1/4" to 1 1/2" (1.66" O.D. to 1.9" O.D.) or tubing of the same O.D. Will work with both "Baby" 5/8" Pin, and "Junior" 1 1/8" Receiver stands, however Junior stands are recommended. The Track Ends are made of Steel and A...
Availability: In Stock
$6999
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: DIY107B
Samy's Part #: S-023444

The VideoMic Accessory Bracket is a very useful and a good quality product by its manufacturer juicedLink. Mounting points for lots of accessories. Fabricated from solid aluminum bar stock. See more photos in the Photo Gallery.This bracket mounts to the 3/8-16 threaded hole at the bottom rear...
Availability: In Stock
$3600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: MVP
Samy's Part #: S-046855

The Redrock Micro microPowerPod V-Mount Battery Plate is used to upgrade the microPod to the microPowerPod. The kit includes mounting hardware and rubber gasket. This plate can be used with standard v-mount batteries from companies such as Sony, Switronix, and IDX. This v-mount plate has one p-tap...
Availability: On Backorder
$8450
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RJG8A
Samy's Part #: S-015756

Our Jag35 rods are made out of solid aluminum.We looked at many different rods and try to find one that’s affordable and well made and couldn’t really find one that was both, so we decided to start machining our own. These are solid aluminum and anodized black. They are great and most impo...
Availability: On Backorder
$4999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350634
Samy's Part #: S-028883

This small, compact Matthews Dove Tail Camera Mount has been designed to allow simple and easy operation. Screw the bottom 1/4-20 male thread into the end of your Noga Arm by Matthews. The mount holds your camera with firm stability and features with quick release system to add or remove your...
Availability: On Backorder
$4299
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RJG20V2
Samy's Part #: S-021229

JAG35 is always looking to improve our products, we are constantly learning and improving our designs to better suit our customers. So JAG35 is proud to introduce its new re-designed JAG35 Hollow Rod V2 (20 inch). Similar to our previous rods, the version 2 rods still conform to the industry s...
Availability: On Backorder
$9999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 0001-7013
Samy's Part #: S-051141

The Syrp Sync Cable for Genie and Genie Mini is used for connecting Genie + Genie Mini for dual axis timelapse and motion control. The sync cable allows you to combine the two systems together to add 2-axis motorized motion to your time-lapse and real-time videos.

Features:
  • For connecting Genie
...
Availability: On Backorder
$1900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: Z-TRN
Samy's Part #: S-030362

The Zacuto Tornado grip connects to the Zacuto Z-Drive (not included) follow focus via a standard whip port. Due to the unique 60 degree curved shape of the Z-Drive and the comfortable horn shape of the Tornado grip, these products combine to create a unique mechanical follow focus handgrip perfect...
Availability: On Backorder
$26125
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: SUVTJ18
Samy's Part #: S-041579

The SIRUI VTJ-1.8 Travel Jib provides creative height changes and following/panning capabilities not possible when your camera is at a fixed position. The VTJ-1.8's portability, flexibility and economy make it ideal for any shooting situation! The precision machining and high performance bearings...
Availability: In Stock
$59994
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: ZHCR
Samy's Part #: S-037242

The Zacuto Halfcage Rail attaches to the Zacuto VCT Universal baseplate. It creates a solid, universal cage structure around the side and top of your camera rig and is adjustable to work with all camera shapes and sizes. It creates great stability, giving your camera a sturdy side grip and the...
Availability: On Backorder
$35550
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 510
Samy's Part #: S-029941

The D/Focus Systems D|Cage is made specifically for the Blackmagic Pocket Cinema Camera. Plenty of space to add external accessories.

Add essential mounting options and camera protection to your Blackmagic Pocket Cinema Camera with the new D|Cage. The D|Cage is precision CNC machined from a solid block...
Availability: In Stock
$14999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: Z-HC
Samy's Part #: S-030346

The Zacuto Half Cage creates a solid, adjustable, universal cage structure around the side and top of your camera rig. This will be the last cage you need to buy! It is adjustable to work with all cameras, sizes and shapes. It creates great stability, especially when shooting with DSLR's, giving...
Availability: In Stock
$37050
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: MVA517W
Samy's Part #: S-017889

The Manfrotto SYMPLA Universal Mount is a self-hanging clamp that slides along SYMPLA rails and locks in position with a single locking lever. The Universal Mount is the basic structural element for numerous SYMPLA components (the Flexible Mattebox, Shoulder Pad, V-Offset, Body and Lens Supports...
Availability: In Stock
$6499
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]