MAIL ORDER 800-321-4726
HDSLR Camera Support Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: VATJT1SET
Samy's Part #: S-031403

Unlike many portable jibs, the new Varavon TILT JIB T1 3.3 ft. MiniJIB can actually tilt the camera when performing vertical movements to keep your subject in frame. This all accounts to a slightly heavier setup than the other Carbon Fiber Mini Cranes, but the Varavon Tilt Jib is strong enough...
Availability: In Stock
$26775
QTY
Free Shipping
MFR Part #: CIMODO01
Samy's Part #: S-038786

Say goodbye to cables, chargers, batteries, belts, and programming. Say hello to Modo. What is Modo? The Cinevate Inc Modo Motion Time Lapse System is affordable, effortless, and precise motion timelapse for the Duzi Slider. The modo is a mechanically driven add-on module for Duzi camera sliders...
Availability: In Stock
$16900
QTY
Free Shipping
MFR Part #: Z-VCT
Samy's Part #: S-043047

The Zacuto VCT Universal Baseplate echoes a traditional ENG style camera with a modern twist. VCT worked well for ENG cameras but modern cameras are lighter and shorter, without a heavy tape recorder or film magazine on the back. Zacuto designers set out to create a plate that merged the stability...
Availability: On Backorder
$47500
QTY
Free Shipping
MFR Part #: OSMOPART47
Samy's Part #: S-045239

The DJI Osmo Z-Axis for Zenmuse X3 Gimbal And Camera can significantly reduce vertical shaking from natural arm movements when walking or jogging. It is compatible with the Zenmuse X3 gimbal and camera.

Features:
  • Significantly reduce vertical shaking
  • Compatible with the Zenmuse X3 gimbal and
...
Availability: In Stock
$12900
QTY
Free Shipping
MFR Part #: RMS1
Samy's Part #: S-028336

The RigWheels RMS1 RigMount is a magnetic camera car mount that uses rare earth magnets to achieve its high holding power. This version has a shorter mounting bolt on top sized specifically for use with cameras and small ball heads. The great thing about mounting a camera with a RigMount magnetic...
Availability: In Stock
$3499
QTY
MFR Part #: VF00148
Samy's Part #: S-033400

The View Factor BMPC Cage Polycarbonate Cover is designed for the Contineo BMPC Cage. Designed to protect your Protects your investment from damage. Protects your camera from the bumps and drops from everyday use.
Availability: In Stock
$1500
QTY
Notice: This item is non-returnable
MFR Part #: 80170007
Samy's Part #: S-004196

The DSLR Tripod Platform provides an easy and convenient way to attach handheld DSLR rigs including Captain Stubling and UltraPort to a tripod. This unique approach allows you to quickly attach to a tripod for lockoff or pan and tilt shooting, and allows you to "leave the weight behind" when going...
Availability: On Backorder
$18400
QTY
Free Shipping
MFR Part #: 8187910
Samy's Part #: S-034888

The Steadicam Counter Balance Weight Kit for Curve And Smoothee is designed to counter balance your action camera or smartphone when using a Curve or Smoothee system.

It also allows you to use the Steadicam Smoothee in conjunction with a GoPro Hero 4. The kit includes one black and one silver...
Availability: On Backorder
$1995
QTY
MFR Part #: 76
Samy's Part #: S-041781

Unlock the full potential of your DJI Ronin-m with the D/Focus Systems D-Mount! This universal mounting plate allows you to mount your Ronin-m to a tripod, car, quadcopter, helicopter, drone, motorcycle, airplane, or anything else you can imagine. Simply mount the D|Mount Ronin-m to your object...
Availability: In Stock
$16499
QTY
Free Shipping
MFR Part #: CIMODO02
Samy's Part #: S-049293

Say goodbye to cables, chargers, batteries, belts, and programming. Say hello to Modo.

The Cinevate Modo Pan Time-Lapse Head (30-Minute Cycle) is a precise motion timelapse head for your camera. Modo's completely mechanical system frees you from the restrictions of cables, belts, and batteries....
Availability: In Stock
$14900
QTY
Free Shipping
MFR Part #: 2-167-0003
Samy's Part #: S-049015

The Redrock Micro Rhino Mount with 6" 15mm Rod is a lightweight mount that allows you to mount 15mm accessories to your cameraʼs hot shoe. Use with smaller handheld rigs and cameras or when space and weight are a premium so you can add 15mm accessories, especially our microRemote Torque Motor....
Availability: On Backorder
$9900
QTY
Free Shipping
MFR Part #: 010
Samy's Part #: S-012663

The D Crank is a standard speed crank for your D Focus. Used for quick pulls from close focus to infinity or to help the operator with rack focus moves. Its alos constructed of Delrin with a steel arm.
Availability: In Stock
$3250
QTY
MFR Part #: 2-025-0001
Samy's Part #: S-022012

The Redrock's microMount (w/out Spud) is tyipcally used to connect two lengths of 15mm rod together usually used for building out rigs. A microSpud can always be added later.
Availability: In Stock
$5950
QTY
Free Shipping
MFR Part #: 706
Samy's Part #: S-025165

The D/Focus Systems 6 In. 15mm Aluminum Support Rods are specifically designed for the photographer needs for extending a camera rig to support more accessories. The rods are made in pair for strong support.
Availability: In Stock
$2995
QTY
MFR Part #: 80170002
Samy's Part #: S-005095

This Redrock Micro 4 In. Handlebar Rod adds a 15mm 4" rod to the handlebar clamp. It features an anti-rotation locking mechanism and attaches with a standard hex screw.

Note! The handlebar clamp is required to use this item.

Features:
  • This rod adds 4" to the Handlebar Clamp
  • It features an a
...
Availability: In Stock
$1500
QTY
Notice: This item is non-returnable
MFR Part #: 429626-3
Samy's Part #: S-045664

The Matthews 3/8-16 Female Accessory Tip for Infinity Arm is specifically designed for Infinity Arm to increase the accessories attaching capabilities with 3/8-16 male threads. It mounts to either end of the Infinity Arm, increasing its versatility and mounting options.

Features:
  • Specifically
...
Availability: In Stock
$2900
QTY
MFR Part #: 429626-4
Samy's Part #: S-045665

The Matthews 3/8-16 Male Accessory Tip for Infinity Arm is specifically designed for Infinity Arm to increase the accessories attaching capabilities with 3/8-16 female threads. It mounts to either end of the Infinity Arm, increasing its versatility and mounting options.

Features:
  • Specifically
...
Availability: In Stock
$2900
QTY
MFR Part #: 429626-6
Samy's Part #: S-045667

The Matthews 5/8 In. Female Accessory Tip for Infinity Arm is specifically designed for Infinity Arm to increase the accessories attaching capabilities with 5/8 In. male threads. It mounts to either end of the Infinity Arm, increasing its versatility and mounting options.

Features:
  • Specifically
...
Availability: In Stock
$3800
QTY
MFR Part #: 429626-8
Samy's Part #: S-045669

The Matthews Cold Shoe Accessory Tip for Infinity Arm is specifically designed for Infinity Arm to increase the accessories attaching capabilities. It mounts to either end of the Infinity Arm, increasing its versatility and mounting options.

Features:
  • Specifically designed for Infinity Arm
...
Availability: In Stock
$3800
QTY
MFR Part #: 708
Samy's Part #: S-025166

The D/Focus Systems 8 In. 15mm Aluminum Support Rods are specifically designed for the photographer needs for extending a camera rig to support more accessories. The rods are made in pair for strong support.
Availability: In Stock
$3995
QTY
MFR Part #: DIY107B
Samy's Part #: S-023444

The VideoMic Accessory Bracket is a very useful and a good quality product by its manufacturer juicedLink. Mounting points for lots of accessories. Fabricated from solid aluminum bar stock. See more photos in the Photo Gallery.This bracket mounts to the 3/8-16 threaded hole at the bottom rear...
Availability: On Backorder
$3600
QTY
MFR Part #: DDMOUNTACQKRLS
Samy's Part #: S-013462


The Delkin Devices Fat Gecko DSLR Camera Mount Quick Release Accessory features a quick release base plate that fastens to your DSLR camera. Then, the base plate slides into the adapter plate, which features a push button key to lock the camera into place. This simple push and release function

...
Availability: On Backorder
$2879
QTY
MFR Part #: RMH1
Samy's Part #: S-028333

The RigWheels RMH1 RigMount with Ball Head is a magnetic mount that uses rare earth magnets to achieve its surprisingly high holding power. (up to 35lbs in a vertical pull) This version has its mounting bolt on top sized specifically for use with cameras and small ball heads. it has a a specially...
Availability: In Stock
$4999
QTY
Free Shipping
MFR Part #: RJG15V2
Samy's Part #: S-021228

JAG35 is always looking to improve our products, we are constantly learning and improving our designs to better suit our customers. So JAG35 is proud to introduce its new re-designed JAG35 Hollow Rod V2 (15 inch). Similar to our previous rods, the version 2 rods still conform to the industry s...
Availability: In Stock
$8999
QTY
Free Shipping
MFR Part #: RW04
Samy's Part #: S-028328

The Camera Slider Dolly RigWheels (4-Pack) are a simple and sleek and portable way to add motion to your images utilizing support equipment that you may already own. Because RigWheels can be used in so many different ways, they are the easiest and most portable way for you to add smooth camera...
Availability: In Stock
$11500
QTY
Notice: This item is non-returnable
Free Shipping
MFR Part #: Z-HC
Samy's Part #: S-030346

The Zacuto Half Cage creates a solid, adjustable, universal cage structure around the side and top of your camera rig. This will be the last cage you need to buy! It is adjustable to work with all cameras, sizes and shapes. It creates great stability, especially when shooting with DSLR's, giving...
Availability: In Stock
$37050
QTY
Notice: This item is non-returnable
Free Shipping
MFR Part #: 3075
Samy's Part #: S-021106

Already own one of the Dinkum Systems ActionPod mounts or any other device with a 1/4-20" thread? Make your gear do double duty with the 1/4-20 to 3/8-16 in. Adapter Screw. Allows fast and simple conversion from a camera mounting device to a microphone shock mount.  Standard 1/4-20" thread converts...
Availability: In Stock
$535
QTY
MFR Part #: DMWSFU1VLOG
Samy's Part #: S-041094

In response to the demand from the film production market, log video recording (V-Log L) is now available for the LUMIX GH4, and offers exceptional flexibility as well as wider dynamic range for color grading in post-production process. V-Log / V-Log L were developed to feature similar charact...
Availability: In Stock
$9999
QTY
Free Shipping
MFR Part #: RMX1
Samy's Part #: S-028331

RigMount magnetic camera mounts are a new approach to portable camera support for both photo and video cameras. With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount...
Availability: In Stock
$22500
QTY
Free Shipping
MFR Part #: LCDMAG
Samy's Part #: S-018125
The Magnifty DSLR Magnifier is designed to fit most of DSLR rigs available on the market. Its uniqueness is simple and allows to focus on an object with both eyes, giving you a stereo affect that's not found in monocle view finders. Its cost comparing to all on-board monitors or view finders is...
Availability: In Stock
$1900
QTY
MFR Part #: ZQTH
Samy's Part #: S-034834

The Zacuto QR Tapped Handle is a quick release handle that will work with any Z-Rail to give you a top handle with two 3/8-16 screw hole mounts. The screw holes can accept a 1/4-20 using a brass collet. The top handle itself is hand tooled fine three quarter maple. The QR Tapped Handle is compatible...
Availability: In Stock
$24700
QTY
Free Shipping
MFR Part #: ZQRSP
Samy's Part #: S-034833

The Zacuto QR Shoulder Pad is a completely universal curved, padded shoulder pad system. The shoulder pad is designed to sit directly under your camera or baseplate putting the camera on top of your shoulder as in a traditional ENG style set up. We call this our Recoil system and it can be adapted...
Availability: In Stock
$19900
QTY
Free Shipping
MFR Part #: 2190010
Samy's Part #: S-009418

The Redrock Micro 8 In. Grip Rod has an integrated rod clamp and thumb screw to attach 8" 15 mm rods to any other 15mm rail. This is perfect for adding accessories such as hand grips, microphone shock mounts, monitor clamps, etc. It becomes great accessory when combined with a microMount.

Features:...
Availability: In Stock
$5450
QTY
Notice: This item is non-returnable
Free Shipping
MFR Part #: SCWHTV2
Samy's Part #: S-021214

The JAG35 Counter Weight V2 is designed to counter balance any Jag35 Shoulder Rig. This Counter Weight is designed to work with all Jag35 Shoulder Rigs. It’ll mount directly to one of our Rail Blocks and should slide right on to industry standard 15mm rods, 60mm spaced apart.
Availability: On Backorder
$9999
QTY
Free Shipping
MFR Part #: ACMBL14
Samy's Part #: S-049066

The UltraLight Control System Monitor Bracket 1/4-20 Fixing is a longer monitor bracket with 1/4 threads to mount the 9 inches Panasonic monitor. The bracket is suitable to mount monitor horizontally or vertically.

Features:
  • Is a longer monitor bracket
  • Monitor bracket with 1/4 threads
  • Used
...
Availability: In Stock
$3295
QTY
MFR Part #: VAMRL1000KT
Samy's Part #: S-027545

The Varavon Motorroid Kit for SlideCam Lite 600/800/1000 Camera Sliders is designed to fit the SlideCam LITE 600/800/1000 camera sliders. It includes a motor with an integrated controller and all the parts necessary to mount it onto the slider powered by DC power adapter for the motor. The kit...
Availability: In Stock
$39014
QTY
Free Shipping
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]