CONTACT US AT 800-321-4726
Grip Heads & Arms
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 042
Samy's Part #: MANF042
Fits into Super Clamp 035 socket.
Availability: On Backorder
$1699
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 244N
Samy's Part #: MANF244N

Articulated arm. Features as 143N, but a large locking knob takes the place of cam-lever. Variable friction and locking of arm obtained by adjusting knob.

Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
$11299
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 6016
Samy's Part #: WESC6016

This is a complete Westcott Boom Arm that includes a tilt bracket to fit the top section of a heavy duty stand (diameter 1-1.25") stand. It also includes a 3.7lb adjustable counterweight.

Extends from 3.6' (1 m) to 6.3' (2 m)
Counterweight adjusts along the boom to balance each load applied
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KG701511
Samy's Part #: S-015134

The Kupo G701511 convi clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi accessories from...
Availability: On Backorder
$2375
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350584
Samy's Part #: MATT350584
Availability: On Backorder
$2320
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B655040
Samy's Part #: MATTB655040

The head on these arms now features two Holes 3/8" And 5/8", eliminating confusion. New castings offer positive lock inall directions. The strongest and most popular grip head inthe industry .
Availability: In Stock
$6560
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9VD5095
Samy's Part #: S-049526

The 9.Solutions Double El-Bo Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any...
Availability: In Stock
$14999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA089
Samy's Part #: S-034618

The three-section Phototools Articulated Arm allows extra versatility, with a sliding extension system for precise positioning of a small camera, lighting fixtures, flags or other items even in awkward and tight spaces.

Both ends of the arm feature 5/8" pins; one with a 1/4"-20 female thread and
...
Availability: In Stock
$4999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350609
Samy's Part #: S-006331

A further development by Matthews from the MICROgrip series of products is the highly maneuverable and quite versatile on-camera light/monitor mouont. MICROmounts is a light/monitor mount utilizing two of the micro-gripheads and three lengths of 3/8" rod to create a highly flxible mount. This will...
Availability: In Stock
$8995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 427000
Samy's Part #: MATT427000

Suction Cups have 5/8" pins, in single and double configurations. The 10" Pump Cup is a heavy duty style without 5/8" pins. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
Availability: In Stock
$9280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350598
Samy's Part #: MATT350598

The Matthews Minigrip Kit consists of four 2" MiniGrip Heads with 3/8 and 5/8" mounting holes, two Mini Matthellini Clamps, and two 20" arms. The Minigrip Kit can be used with camera attachments and other accessories as well as lighting equipment. These miniature tools are ideal for tabletop...
Availability: In Stock
$22000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 098B
Samy's Part #: MANF098B

Wall mounted boom arm. 2 section.
Availability: On Backorder
$14979
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 5571
Samy's Part #: S-035326

The super durable and stable Westcott Illuminator Reflector Arm Extreme gives photographers the ability to mount their reflectors and boards effortlessly. With grip mounts located on both ends and a telescopic all-metal arm, the Illuminator Arm Extreme can precisely position the new Omega Reflector...
Availability: On Backorder
$7990
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 655040
Samy's Part #: MATT655040

The head on these arms now feature two holes 3/8" and 5/8" eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it!
Availability: In Stock
$6400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9VD5089XS
Samy's Part #: S-049531

The 9.Solutions Double Joint Arm (Tiny, 260mm) has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of eq...
Availability: In Stock
$7499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: D200B
Samy's Part #: AVEND200B

Avenger's most popular grip accessory. The D200B Grip Head has hundreds of functions. Unlike any other grip head, the D200 utilizes a series of washers for extra locking torque and the use of automotive-quality brake pad discs for secure, non-slip security.
Availability: On Backorder
$3088
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9VE5085
Samy's Part #: S-049532

The 9.Solutions El-Bo Arm is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant locking-mechanism that makes it possible to operate with one hand....
Availability: In Stock
$7999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B681013
Samy's Part #: S-033380

The Matthews 40 In. Hollywood Gobo Arm with Grip head features the strongest Grip Head in the industry. The grip guaranteed to hold firmly, just set it and forget, it will not let the arm to slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in...
Availability: In Stock
$5799
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: B655020
Samy's Part #: S-045111

The Matthews Hollywood Head and Arm (20 In. Black) is made of Stainless Steel and T-Handles is ergonomically designed to allow for fast, efficient, safe tightening with little effort. The arm features with Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an...
Availability: On Backorder
$6560
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 237
Samy's Part #: MANF237

A flexible arm designed to be used with the super clamp system. The Flexarm can hold light weight fixtures or props and be easily moved and held in place without having to lock any knobs. Flexible arm, 1/2" diameter, 21.6" long with hexagonal stud to fit Super Clamp 2915. 3/8" female thread on one end...
Availability: In Stock
$2299
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9VBROD5
Samy's Part #: S-049519

The 9.Solutions 5/8 In. Rod Set (150mm) consists of two 5/8" (16mm) diameter rods made from high grade aluminum. The rods have 3/8"-16 female threads on each end. Increase the rod's length by connecting additional rods with 9.Solutions 5/8" Rod Connectors. Additionally, 9.Solutions 3/8" Rods can...
Availability: In Stock
$1999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: F900
Samy's Part #: AVENF900

The Avenger F900 Baby Triple Header allows you to mount as many as five light heads to one heavy duty light stand. It has five Baby (5/8") studs and one Baby receiver. Allows you to mount up to 5 fixtures.
Availability: On Backorder
$4588
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: B350580
Samy's Part #: MATTB350580

The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. Castings offer positive lock in all directions.
Availability: In Stock
$3200
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 244MICRO-AR
Samy's Part #: S-040052

The Manfrotto 244 Micro Arm with Anti-Rotation is a versatile 15cm (5.9") friction arm with interchangeable Anti-rotation attachments and additional 3/8'' adapter included. The Anti-rotation system is compatible with Manfrotto products including 055 series, 190 series, and 386B-1 Nano Clamp. The...
Availability: On Backorder
$10499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 016
Samy's Part #: MANF016

Slips over and locks onto a standard 5/8" stud. Provided with 3/8" threaded tip. Adapts to a Broncolor flash head, or any other lighting equipment that requires a smaller stud.

* Replaces item # 3100
Availability: In Stock
$1450
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 176
Samy's Part #: MANF176

The Manfrotto 176 Set of U-Hooks for Mini Clamp is a set of 2 black aluminum U-Hook crossbar holders. They attach to the Super Clamp.
Availability: On Backorder
$1207
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 3506022
Samy's Part #: S-006322

For use with MICROgrip mounts and bases, positioning lighting and scrims to create dramatic and creative lighting effects with an on-camera lighting fixture or attached to a base. Tapped with standard 3/8" threading.
Availability: In Stock
$695
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: D200
Samy's Part #: AVEND200

Avenger's most popular grip accessory. The D200 Grip Head has hundreds of functions. Unlike any other grip head, the D200 utilizes a series of washers for extra locking torque and the use of automotive-quality brake pad discs for secure, non-slip security.
Availability: On Backorder
$2888
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA063B
Samy's Part #: S-034617

The Phototools 25mm Twin Grip Head is like having two grip heads in one. This double grip head allows multiple light control accessories (like scrims and flags) to be mounted in front of fixtures without the need for extra light stands. 
Availability: In Stock
$2999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350580
Samy's Part #: MATT350580

The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions.
Availability: In Stock
$3200
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9VP5081D
Samy's Part #: S-049549

The 9.Solutions Python Double Clamp is more to the Python Clamp than meets the eye. It can be adapted for use with many different accessories used in photo, video, stage, and visual merchandising. Some examples of use includes Photo and Video: It can be used in a combination with a grip head,...
Availability: In Stock
$4299
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 237HD
Samy's Part #: MANF237HD

A flexible Heavy Duty arm designed to be used with the super clamp system. Similar to the 2896 Flex Arm but with a larger diameter of .7". The Flexarm can hold light weight fixtures like a 150W Fresnel or props and be easily moved and held in place without having to lock any knobs.

Flexible arm, 1/2" diameter, 2...
Availability: In Stock
$3199
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9.VD5089L
Samy's Part #: S-049527

The 9.SOLUTIONS Double Joint Arm (Long, 660mm) Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8 In. pin with a 3/8 In.-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety...
Availability: In Stock
$8999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DL-0320
Samy's Part #: S-022439

The new Dot Line Corp Multi-Flash Umbrella Holder is all metal and will accept up to 3 speedlights. The accessory shoes are adjustable for the size of the speedlight foot and are insulated to prevent misfires. A locking screw holds the umbrella in place. The holder accepts light stand spigots up to 5/8”...
Availability: In Stock
$4995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: D500LB
Samy's Part #: AVEND500B

20" C-Stand Extension Arm provides an extended grip point for scrims and flags.
Availability: On Backorder
$3688
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 3506024
Samy's Part #: S-006320

For use with MICROgrip mounts and bases, positioning lighting and scrims to create dramatic and creative lighting effects with an on-camera lighting fixture or attached to a base. Tapped with standard 3/8 in. threading.
Availability: In Stock
$865
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]