CONTACT US AT 800-321-4726
Grip Heads & Arms
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 098B
Samy's Part #: MANF098B

Wall mounted boom arm. 2 section.
Availability: On Backorder
$14988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 196AB2
Samy's Part #: MANF196AB2

Single articulated arm with two sections. Top attachment with a 16mm spigot 3/8" light attachment. Bottom attachment with a 16mm spigot (compatible with light attachment Superclamp) with 1/4" thread.
$3188
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 396B2
Samy's Part #: MANF396B2

The Manfrotto 396B-2 Articulated Arm supports up to 11 lbs with its built-in camera bracket. The 396B-2 offers excellent performance: robustness, lightness and versatility. The 396 family has been developed to provide greater rigidity and support than the 196 range, while maintaining flexibility...
$9788
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 350611
Samy's Part #: S-006343

A further development by Matthews from the MICROgrip series of products is the highly maneuverable and quite versatile on-camera light/monitor mouont. MICROmounts is a light/monitor mount utilizing two of the micro-gripheads and three lengths of 3/8in. rod to create a highly flxible mount. This...
Availability: In Stock
$12295
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: YA040
Samy's Part #: S-034609

The Phototools 4.5" Grip Head with Junior Pin and receiver is designed to allow a junior roller stand to securely support large butterfly and overhead frames.

Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
$6999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 237HD
Samy's Part #: MANF237HD

A flexible Heavy Duty arm designed to be used with the super clamp system. Similar to the 2896 Flex Arm but with a larger diameter of .7". The Flexarm can hold light weight fixtures like a 150W Fresnel or props and be easily moved and held in place without having to lock any knobs.

Flexible arm, 1/2" diameter, 2...
Availability: In Stock
$3188
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 5571
Samy's Part #: S-035326

The super durable and stable Westcott Illuminator Reflector Arm Extreme gives photographers the ability to mount their reflectors and boards effortlessly. With grip mounts located on both ends and a telescopic all-metal arm, the Illuminator Arm Extreme can precisely position the new Omega Reflector...
Availability: On Backorder
$7990
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: D200B
Samy's Part #: AVEND200B

Avenger's most popular grip accessory. The Avenger D200 2.5" Grip Head (Black) has hundreds of functions. Unlike any other grip head, the D200 utilises a series of washers for extra locking torque and the use of automotive-quality brake pad discs for extra security.
Availability: In Stock
$3099
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: D520LB
Samy's Part #: AVEND520B

This 40" C-Stand Extension Arm is capable of holding light heads, flags, reflectors, or a gobo.
$4099
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: MLH1HS
Samy's Part #: S-031861

The Manfrotto Snap Tilthead with Shoe Mount is a versatile tilt head with hot shoe attachment compatible with all branded flashguns, it also incorporates an umbrella socket. A smart counterbalance mechanism prevents the flashgun from dropping along the stand, thus assuring maximum safety to the...
$3988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: D500L
Samy's Part #: AVEND500

20" C-Stand Extension Arm provides an extended grip point for scrims and flags.
Availability: On Backorder
$3499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: D500LB
Samy's Part #: AVEND500B

20" C-Stand Extension Arm provides an extended grip point for scrims and flags.
Availability: On Backorder
$3699
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 681012
Samy's Part #: MATT681012

The Matthews 20 In. Hollywood Gobo Arm with Grip head features the strongest Grip Head in the industry. The grip guaranteed to hold firmly, just set it and forget, it will not let the arm to slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in...
Availability: In Stock
$4640
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: 042
Samy's Part #: MANF042
Fits into Super Clamp 035 socket.
Availability: On Backorder
$1699
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 244N
Samy's Part #: MANF244N

Articulated arm. Features as 143N, but a large locking knob takes the place of cam-lever. Variable friction and locking of arm obtained by adjusting knob.

Please Note: Old inventory, New, but packaging may show signs of age.
Availability: In Stock
$9988
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 6016
Samy's Part #: WESC6016

This is a complete Westcott Boom Arm that includes a tilt bracket to fit the top section of a heavy duty stand (diameter 1-1.25") stand. It also includes a 3.7lb adjustable counterweight.

Extends from 3.6' (1 m) to 6.3' (2 m)
Counterweight adjusts along the boom to balance each load applied
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KG701511
Samy's Part #: S-015134

The Kupo G701511 convi clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi accessories from...
Availability: On Backorder
$2375
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350584
Samy's Part #: MATT350584
Availability: In Stock
$2320
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KD700912
Samy's Part #: S-015125

The D700912 is a mini flex arm with a 3/8"-16 female thread inside a baby 5/8" (16mm) adapter on one side and an alligator clip on the other. It's the perfect accessory to hold small items such as a mini flag or reflector. he D700912 is 11.4" (29mm) in length.
$2350
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: B655040
Samy's Part #: MATTB655040

The head on these arms now features two Holes 3/8" And 5/8", eliminating confusion. New castings offer positive lock inall directions. The strongest and most popular grip head inthe industry .
Availability: On Backorder
$6560
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 9VD5095
Samy's Part #: S-049526

The 9.Solutions Double El-Bo Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any...
Availability: In Stock
$14999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 196AB3
Samy's Part #: MANF196AB3

The three-section Manfrotto 196AB-3 Articulated Arm supports 2.2 lbs @ full extension. Extra versatility is also given by the sliding extension system which allows for easier positioning of lighting fixtures even in awkward and tight spaces.

Maximum Length is 33.5 inches, and the bottom 5/8" spigot...
$4488
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: YA089
Samy's Part #: S-034618

The three-section Phototools Articulated Arm allows extra versatility, with a sliding extension system for precise positioning of a small camera, lighting fixtures, flags or other items even in awkward and tight spaces.

Both ends of the arm feature 5/8" pins; one with a 1/4"-20 female thread and
...
Availability: In Stock
$4999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350609
Samy's Part #: S-006331

A further development by Matthews from the MICROgrip series of products is the highly maneuverable and quite versatile on-camera light/monitor mouont. MICROmounts is a light/monitor mount utilizing two of the micro-gripheads and three lengths of 3/8" rod to create a highly flxible mount. This will...
Availability: In Stock
$8995
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 427000
Samy's Part #: MATT427000

Suction Cups have 5/8" pins, in single and double configurations. The 10" Pump Cup is a heavy duty style without 5/8" pins. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
Availability: In Stock
$9280
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 350598
Samy's Part #: MATT350598

The Matthews Minigrip Kit consists of four 2" MiniGrip Heads with 3/8 and 5/8" mounting holes, two Mini Matthellini Clamps, and two 20" arms. The Minigrip Kit can be used with camera attachments and other accessories as well as lighting equipment. These miniature tools are ideal for tabletop...
Availability: In Stock
$22000
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 143N
Samy's Part #: MANF143N

The Manfrotto 143N Magic Arm without Camera Bracket is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking lever control at the pivot. It will accept any light fixture up to 6.6 lbs that has a baby (5/8") receptor.


FEATURES:

...
$9788
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 655040
Samy's Part #: MATT655040

The head on these arms now feature two holes 3/8" and 5/8" eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it!
Availability: On Backorder
$6400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 429752
Samy's Part #: S-028277

The Matthews Heavy Duty Baby Side Arm can be clamped anywhere on the stand riser, allowing a light to be lowered to just above the legs and slightly offset, without the need for another stand. The Heavy Duty Side Arms utilize a special vice clamp and are made with heavier materials. In both cases,...
$11500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: KG203111
Samy's Part #: S-021395

The Kupo 2-1/2 In. Grip Head With Big Handle (Black Powder-Coated Finish) has four different "V" shaped jaws, an ergonomic oversized "T" handle with dedicated roller bearings for maximum torque, and a non-slip aluminum friction disc. Aluminum and steel construction. The "V" shaped jaws have "teeth"...
$2495
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
MFR Part #: D520L
Samy's Part #: AVEND520L

The Avenger D520L 40" Extension Arm is usually used in conjunction with a stand mounted grip head to gain reach and articulation via the arm's built-in grip head. This chrome-plated steel arm can hold a small light head, flag, or reflector.

Chrome-plated Steel and Aluminum Alloy
Permanently...
$3899
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 9VD5089XS
Samy's Part #: S-049531

The 9.Solutions Double Joint Arm (Tiny, 260mm) has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of eq...
Availability: In Stock
$7499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KG203212
Samy's Part #: S-023580

The Kupo 20 In. Grip Arm with Big Handle is a 2 1/2 In. grip head mounted on the end of a 20 In. piece of steel tubing 5/8 In. (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2 In. grip head consists of a pair...
$3095
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 9VE5085
Samy's Part #: S-049532

The 9.Solutions El-Bo Arm is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant locking-mechanism that makes it possible to operate with one hand....
Availability: In Stock
$7999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 196B2
Samy's Part #: MANF196B2

A more versatile version with telescopic features that make this product even more compact than before. Allows easier positioning of lighting fixtures even in awkward and tight spaces. (Replaces the 2935 Articulated Arm).

Maximum Length is 23.8 inches, and the bottom 5/8" spigot (compatible with...
$4588
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 9VB5087A
Samy's Part #: S-049534

The 9.Solutions EL-BO Arm Angled Mini is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant locking-mechanism that makes it possible to operate with...
$4500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Special Order
Call to Order: 1-800-321-4726
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]