CONTACT US AT 800-321-4726
Flash Adapters
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: DL-0410P
Samy's Part #: S-042891

The Dot Line Corp. Dual Male 1/4-20 Post Adapter is solid brass featuring 2 male 1/4-20 threads and can be mounted via any 5/8” receiver. Total length is 1-9/16 inches.

Features:
  • Made of solid brass
  • Features 2 male 1/4-20 threads
Availability: In Stock
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: ADPMAA
Samy's Part #: S-022201

The Sony Multi-Interface Shoe Adapter for Select Sony Products allows you to use auto-lock shoe-compatible accessories with cameras and camcorders that feature a new multi-interface shoe.

Compatible with:
NEX-VG900
NEX-VG30
NEX-VG30H
Cyber-shot RX1
Alpha NEX-6
a99
Availability: In Stock
$2200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: HA6952P
Samy's Part #: DOTLHA6952P

Permits a flash unit with a hot shoe contact to be mounted on a camera without a hot shoe contact.
Availability: In Stock
$1895
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: ADPAMA
Samy's Part #: S-022437

The Sony Auto-Lock Hot Shoe Adapter allows you to use new multi-interface accessories with your Alpha DSLR camera's auto-lock accessory shoe.

Make the most of your Sony Alpha DSLR camera by expanding its accessory compatibility to include new multi-interface accessories. Just connect the ADP-AMA...
Availability: In Stock
$2495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS8510
Samy's Part #: S-004410

This is a perfect connector for speedlites that do not have a PC connection such as the older Canon TTL flash units when you want to attach it to a "Pocket Wizard". Please note that the hot shoe portion has dummy plugs that allow the multi pins of TTL flash units to slide on and off the shoe...
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: FA-CS1M
Samy's Part #: S-031271

Easily connect external studio flash units to your Alpha a7 Series full frame camera via the sync cable and this Sony FA-CS1M Off-Camera Shoe for External Flash with Multi-Interface Shoe and Increase the capabilities of your DSLR camera. Enjoy flexible flash options with the off-camera for MI...
Availability: On Backorder
$3295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: LC-HS11
Samy's Part #: S-047505

The ultimate accessory for anyone with a DSLR or digital camera! The Lume Cube Hot Shoe Mount allows you to mount your Lume Cube on any camera with a Hot Shoe mount, creating the best constant light solution on the market today. With a Ball Head mount built-in, you're able to angle your light...
Availability: In Stock
$2499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG010011
Samy's Part #: S-045017

This inexpensive little Kupo Mini Ball Head with Hot Shoe Adapter is super handy to position any device that mounts onto a 1/4"-20M thread such as field recorders, field monitors, microphones, shoe mount flashes, microphones, etc. it is used to add some control and versatility to your accessory...
Availability: In Stock
$2150
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 1179C001
Samy's Part #: S-045560

Soften and gently diffuse the light from your Speedlite 600EX II-RT with the Canon SBA-E3 Bounce Adapter. This translucent dome evenly spreads the light from your flash, when using it in a bounce position, for more natural lighting with your Speedlite.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3066
Samy's Part #: NIKO3066

Designed for use with Nikon cameras with standard ISO-type accessory shoes that do not have a sync terminal.

The AS-15 is compatible with cameras such as the D7000, D90, D5000, D3100 and D3000, which feature standard ISO-type accessory shoe but lack a sync terminal for large studio strobes.

The...
Availability: In Stock
$1995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: HA6950P
Samy's Part #: DOTLHA6950P

Permits a flash unit with a hot shoe contact to be mounted on a camera without a hot shoe contact, or vice-versa.
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: FACS1AM
Samy's Part #: SONYFACS1AM

Achieve better lighting angles and spectacular photos with off-camera shooting. Attach the FA-CC1AM off-camera cable to your Alpha DSLR camera and the FA-CS1AM off-camera shoe to your alpha flash (sold separately), and position it toward your subject at any angle you desire. The results will be...
Availability: In Stock
$2000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: HA6893P
Samy's Part #: DOTLHA6893P

All Purpose Bounce Hot Shoe Adapter is designed to solve many of the flash connection problems. It permits a flash unit with a hot shoe contact to be mounted on a camera without a hot shoe contact or vice-versa. Thus, a hot shoe only flash can be connected to a camera with only a PC connection...
Availability: In Stock
$3995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0693P
Samy's Part #: DOTLDL0693P
Brushed aluminum with male 1/4-20 post. Used to mount flash on any camera that has tripod socket, but no accessory shoe.
Availability: In Stock
$799
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: TRFSA8P
Samy's Part #: TESTTEFSA8P

This Testrite Shoe Adapter slides onto a video camera's accessory shoe, or a still camera's hot shoe. It enables mounting of a fixture that has a 1/4"-20 female threaded bottom. Its 2 locking discs secure the shoe to the camera, and the fixture to the adapter.
Availability: In Stock
$1495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0415P
Samy's Part #: S-005990

Adapts the hot shoe on a Sony DSLR camera to a standard hot shoe allowing the attachment of standard accessories to the camera. It also features a standard pc connector on the side for non-hot shoe accessories and a locking pin with release to ensure a secure connection to the hot shoe of the...
Availability: In Stock
$2395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4905
Samy's Part #: NIKO4905

The SG-3IR IR Panel for Built-in Flash prevents pre-flash light from built-in Speedlight (D200, D70s or D70) from influencing exposures in extreme close-up situations.
Availability: In Stock
$1195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: BH2
Samy's Part #: CUSTBH2

The Custom Brackets BH-2 Battery Holder is designed to support the Metz 60 series battery from the bottom using a 2 piece holder. The battery mount stays attached to the bottom of the battery, while the receiver attaches to the tripod or lightstand. This holder uses the battery's own weight to...
Availability: In Stock
$1900
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: KSPT
Samy's Part #: S-015064

The K-Tek Shoe Plate Mount provides a flat surface for mounting accessories including audio transmitter receivers and recorders to the top of shoe on a camera.
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0694P
Samy's Part #: DOTLDL0694P

Brushed aluminum adapter with female shoe for use with auxiliary flash. May be used on tripod or light stand.
Availability: In Stock
$999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL-0416
Samy's Part #: S-023376

Included with the DV60/DV60A, Dot Line Corp Double Male Shoe Adapter is also available separately and has two male "feet" which both have a locking collar.
Availability: In Stock
$994
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 804610
Samy's Part #: S-027456

The PocketWizard PTMM Pre-Trigger Adapter Adapts a PocketWizard miniphone sync cable like the MM1, MM3, or MM6 to any electronic flash equipped with a 3/32 (2.5 mm) sub miniphone sync terminal. It converts 1/8 (3.5 mm) stereo miniphone female to 3/32 (2.5 mm) sub-miniphone female.

Compatible with...
Availability: In Stock
$595
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: YA065
Samy's Part #: S-034615

The Phototools Camera Bracket is designed to support small cameras up to 1 pound on an articulated arm.

The bracket features a captive, sliding 1/4"-20 camera screw, a non-slip surface, and two 5/8" receivers for the arm or a stud.

Compatible with the Phototools Articulated Arm
Availability: In Stock
$2499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 3563B001
Samy's Part #: S-002829

Ring to attach MT-24EX, MR-14EX, or ML-3 to most lenses with 67mm filter size.
Availability: In Stock
$3200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL0418P
Samy's Part #: S-024506

The Dot Line Corp. Hot Shoe to PC with 1/4-20 Female Thread Adapter is used to mount a shoe-mount flash on a tripod for off-camera flash. It has a base with 1/4 -20 socket, two female PC sockets, one on either side, and a plain hot shoe contact on top. The base also fits into a hot shoe, with...
Availability: In Stock
$1595
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: HA6951P
Samy's Part #: DOTLHA6951P

Permits a flash unit without a hot shoe contact to be mounted on a hot shoe camera.
Availability: In Stock
$1595
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350614
Samy's Part #: S-006346

The MICROgrip Hot Shoe Adpater takes you from 3/8" thread size to 1/4" thread size.
Availability: In Stock
$2285
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3119
Samy's Part #: S-006195

Designed to solve the problem of getting a secure fitting for the various sizes of accessory shoes on speedlites today, the spring loaded clamp evenly secures the foot of a speedlite to the shoe. The she has an air gap in the center to preclude the flash from misfiring. The all metal construction...
Availability: In Stock
$795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YCEB15
Samy's Part #: S-034608

The Phototools 6" Cold Shoe Extension allows you to expand the number of items mounted to your camera's hot shoe.

It features a 6" aluminum rail raised about 1.5" above the camera, capable of supporting multiple shoe-mounted accessories. The extension's shoe mount also includes a 3/8" threaded...
Availability: In Stock
$1999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4102
Samy's Part #: S-034465

Supplied stand to hold the SB-500 AF Speedlight in place during multiple flash set-up. The Nikon AS-23 also features a tripod socket, allowing the Speedlight to be attached to a tripod or light stand.
Availability: In Stock
$995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 4945
Samy's Part #: S-015435

The WG-AS1 water guard is useful for protecting the camera's hot shoe contact when the SB-910 or SB-900 is mounted on the D3 or D3X
Availability: In Stock
$2795
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: DL-0421
Samy's Part #: S-018112

The Dot Line DLC Dlx Hot Shoe to PC M/F adapter enables a camera without a PC sync socket to sync with a flash without a hot shoe, or to other equipment that has a PC sync connection.

Features:
  • Locking Hot Shoe Mount
  • 2 Female PC Outlets
  • 1 Male PC Outlet
  • Test Button
Availability: In Stock
$1795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2829A001
Samy's Part #: CANO2829A002

Adapter ring to attach ML-3, MR-14EX, or MT-24EX to most lenses with 72mm filter size.
Availability: On Backorder
$2795
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 2365A001
Samy's Part #: CANO2365A001

Adapter ring to attach ML-3, MR-14EX, or MT-24EX to most lenses with 58mm filter size.
Availability: In Stock
$1495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: HA6963P
Samy's Part #: DOTLHA6963P

Allows connection of several flashes to one sync cord.
Availability: In Stock
$1695
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: RS3111
Samy's Part #: DOTLRS3111

This is used for mounting a flash to the shoe mount on a camera. A thumbscrew is provided for tightening the flash to the adapter. A plastic insulating layer prevents the flash from firing accidentally.
Availability: On Backorder
$695
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]