CONTACT US AT 800-321-4726
Clamps
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 350617
Samy's Part #: S-015212

The MicroClamp can grip to round or flat surfaces, as well as many other objects or shapes one may find on set. It's reduced size and dual 3/8" and ¼" mounting holes give it extreme flexibility. Its strength is derived from a precision aluminum extrusion, it's high performance stick pads and an...
Availability: In Stock
$2320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 541004
Samy's Part #: MATT541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes with...
Availability: In Stock
$3600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA051
Samy's Part #: S-034613

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429678
Samy's Part #: S-008286

Made to attach to the dropped ceiling tile support rails found in many offices it affords the mounting of small lighting instruments on its 5/8" pin without the need for a stand. The Drop Ceiling Cable Holder (included with clip) clips onto the 5/8" pin to keep cables near the ceiling and out...
Availability: In Stock
$1520
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG702811
Samy's Part #: S-039080

Kupo Super Claw is a small clamp with many great features! The new design allows for an increased payload over the former KUPO Pincer clamp and other clamps in the market. What separates this clamp from the competition is the fact that the pads are customer replaceable. Some companies use tape...
Availability: In Stock
$2500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 035
Samy's Part #: MANF035

The Manfrotto 035 Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Replaces item # 2915
Availability: On Backorder
$2699
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL4001P
Samy's Part #: S-024781

The new, economical Dot Line Corp. Table Top Tripod Clamp Combo is a composite material clamp that features locking metal legs that fold up out of the way when not in use. The feet of the legs are a composite material to help protect surfaces. The ball head rotates 360° and tilts 90°. The jaw...
Availability: In Stock
$1195
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 420110
Samy's Part #: MATT420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: C1000
Samy's Part #: AVENC1000

The Avenger C1000 Drop-Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" (Baby) stud.
Availability: In Stock
$899
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429620
Samy's Part #: MATT429620

A cheeseboro clamp with a 1-1/8" pin attached to it serves multiple purposes. Use it with a piece of pipe with a diameter of 1-3/4" to 3-1/4" as a temporary overhead grid.
Availability: In Stock
$5600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: PD05020
Samy's Part #: KALTPD05020

For mounting a camera, or small light fixture that has a 1/4-20 inch screw threaded bottom. The Ultra Clamp Assembly locks and tightens to any side car window, shelf or arm up to 1-1/2 inch thickness. Includes a locking 2 way swivel/tilt head.
Availability: In Stock
$2995
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9.VB5079
Samy's Part #: S-049538

The 9.Solutions Python Clamp Mini combines a clamp with a revolving 3/8" and 5/8" Pass-thru receptacle. Both the clamp and pass-thru receptacle tighten via one T-knob, allowing for remarkable ease of use. The clamp can be positioned anywhere along a 3/8" or 5/8" rod, and it can swivel around the...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA056
Samy's Part #: S-034614

The Phototools Adjustable Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.
Availability: In Stock
$1999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 035RL
Samy's Part #: MANF035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B209642
Samy's Part #: S-012793

The Matthews Swivel U-Hook Snap-in is a U-Hook bracket to hang cables. It can also be used in pairs to suspend tubes, pipes, photography backgrounds or even to support a horizontal Matthpole.
Availability: In Stock
$1395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA052
Samy's Part #: S-044776

The Phototools 3 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$799
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 123
Samy's Part #: MANF123

The Manfrotto 123 Pivoting Boom Clamp is a pivoting clamp for use with all Super Booms and Heavy Duty Booms. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and 5/8" female receptor.
Availability: In Stock
$4988
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 540004
Samy's Part #: MATT540004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
$2880
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: YA050
Samy's Part #: S-044775

The Phototools 1 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$399
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 420210
Samy's Part #: MATT420210

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design, reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3"...
Availability: In Stock
$4500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9.VB5109
Samy's Part #: S-049542

The Heavy Duty T-Handle can replace the standard tightening handle on the 9.Solutions Savior Clamp or any full sized Python Clamp.

The ergonomic design of the handle provides increased surface area for a sturdier grip and easier torque. The hard anodized aluminum surface increases its durability

...
Availability: In Stock
$2000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: DL-3103
Samy's Part #: S-051067

The versatility of the Dot Line Corp. Super Clamp For Seamless Backgrounds is equaled only by its durability and is used to clamp the seamless background papers. An item to have on hand at all times, the Super Clamp can be clamped to anything of 1.75 inches. The Super Clamp can also accept a s...
Availability: On Backorder
$295
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG900412
Samy's Part #: S-015137

The Kupo G900412 3-way clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.0 - 1.4" (25 - 35mm) in diameter.

Just a quick turn...
Availability: In Stock
$3495
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 417026
Samy's Part #: S-025427

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common use is for camera shots...
Availability: In Stock
$5499
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429042
Samy's Part #: MATT429042

Of Amish design... Also known as the Quacker Clamp or Duck Bill. This clamp is ideal for positioning foam core or bead board.
Availability: In Stock
$8640
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 038
Samy's Part #: S-037193

The Manfrotto  038 Double Super Clamp is a set of two super clamps fastened together at fixed right angle to provide extra strength support for tubes or bars. The clamps are made of lightweight cast alloy, fastened together at a 90 degrees angle. Clamps on tubes 1/2 to 2-1/8 inches in diameter....
Availability: In Stock
$5699
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 101081
Samy's Part #: S-039081

TheProfoto Pivoting Clamp for 5 ft. or 7 ft. Reflector is a pivoting clamp for use with a 5 ft. or 7 ft. reflector. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and 5/8" female receptor.
Availability: In Stock
$19595
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 375
Samy's Part #: MANF375

The Manfrotto 375 Multiclip is a stacked pair of clips that can be used to clip a reflector card, gobo, prop, leaf, etc., to a stand, branch or shelf. Total length is 4.5".
Availability: In Stock
$988
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429618
Samy's Part #: MATT429618

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin attached....
Availability: In Stock
$3440
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KG701611
Samy's Part #: S-037274

The Kupo Convi Clamp With Hex Stud (Black) is more than just an amazing clamp; it's the foundation of an entire grip system.

The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi...
Availability: In Stock
$2550
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9XS1005
Samy's Part #: S-049551

The 9.Solutions Savior Clamp has unique, articulating jaws that can fit firmly onto any oddly shaped object. Whether mounting on round, square, or flat objects, the peak-and-valley design of the jaw allows for multiple points of contact, ensuring a strong grip every time. The Savior Clamp is tapped...
Availability: In Stock
$3999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 386B
Samy's Part #: MANF386B

The Manfrotto Nano Clamp is smaller in size than the popular Super Clamp and is even more versatile. Its reduced size is the most important plus, and at just 3.87 ounces, the Nano Clamp has a capacity of 12.13 pounds. The Nano Clamp has both 3/8” and ¼” attachments to make it compatible with...
Availability: In Stock
$3488
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B541004
Samy's Part #: MATTB541004

The Matthews Super Mafer Clamp with 5/8 in. Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength...
Availability: In Stock
$3600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 420112S15
Samy's Part #: MATT420112S15

The Mini Matthellini Clamp is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The Mini-Matthellini Clamps are half...
Availability: In Stock
$4240
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 9VB5081A
Samy's Part #: S-049544

The 9.Solutions Python Clamp With 5/8 In. Pin is more to the Python Clamp than meets the eye. It can be adapted for use with many different accessories used in photo, video, stage, and visual merchandising. Some examples of use include Photo and Video: It can be used in a combination with a grip...
Availability: In Stock
$2999
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 425157
Samy's Part #: S-004653

The Matthews Baby Grid Clamp is made to clamp securely on overhead grids, car rigs or camera car rails for the mounting of light fixtures. Can be inverted with the pin mounting into a Grip Head for spanning pipe between 2 stands.
Availability: In Stock
$4720
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]