CONTACT US AT 800-321-4726
MFR Part #: GT1002AQ
Samy's Part #: S-024900
The Xit 404 Aquatica Type 4 Gear for Nikon - Turtle Line is part of the Turtle Line and is designed to fit with approved Aquatica SLR housings for Nikon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold se...
Availability: In Stock
MFR Part #: CP1021AQ
Samy's Part #: S-033449
The Aquatica Port Cap is a cover that attaches to open end of a macro or wide angle port. This allows you to store other items such as our Manta gears inside when packing for a trip. We suggest that you put some bubble wrap in to protect your port glass first. If you stack your extension rings...
Availability: In Stock
MFR Part #: CB1001AQ
Samy's Part #: S-024913
The Xit 404 Aquatica Body Cap is cover that attaches to the port opening on the housing the same way a port attaches. Included with the cap is a hot shoe receptacle that secures the sync cable from hanging loose inside the housing. Keep your underwater housing and its sync cable safe with a Body...
Availability: In Stock
MFR Part #: OP1101AQ
Samy's Part #: S-033857
The Xit 404 Diopter Single Mount Kit Aquatica 76 comes ready to attach Aquatica, SubSea, or Inon 67mm threaded wet diopters to your lens port.
This Diopter Mount kit has 7 other positions where you can attach more diopter holders. When the diopter is not in use, just swing it out of the way. A...
This Diopter Mount kit has 7 other positions where you can attach more diopter holders. When the diopter is not in use, just swing it out of the way. A...
Availability: In Stock
MFR Part #: GN1004SS
Samy's Part #: S-024899
The Xit 404 Sea & Sea Gear Nikon AF-S Micro 105mm VR in conjunction with a Nikon AF-S Micro 105mmVR Focus Ring (sold separately) makes up a complete Focus Gear for the Nikon AF-S Micro 105mmVR lens . It is designed to fit with approved Sea & Sea SLR housings for Nikon cameras. The gear is con...
Availability: In Stock
MFR Part #: GN210100
Samy's Part #: S-024985
This Xit 404 Nikon Macro EF USM 105mm VR Focus Ring Kit brings the focus back to the zoom knob on the housing, freeing your hand from having to focus on the port itself.
Availability: In Stock
MFR Part #: TS2009NC
Samy's Part #: S-024910
The Xit 404 Tripod Bracket for Nauticam Housings is designed to mount to the bottom of the Nauticam housing. Three 1 inch diameter ball adaptors work with industry standard clamps or with Xit 404's Twist Clamps (clamps are not included).
The bracket is Black anodized and provided pre-mounted with...
Availability: In Stock
MFR Part #: GM2103CN
Samy's Part #: S-024889
The Xit 404 Canon Macro EFL IS USM 100mm (IS) Focus Ring Kit Manta Line in conjunction with a gear makes up a complete Focus Gear for this lens. The ring kit is made of impact resistant ABS plastic. The Focus Ring is a two-part ring that is Gray and Red.
Xit 404 has designed a group of intercha...
Availability: In Stock
MFR Part #: GT210100
Samy's Part #: S-024903
The Xit 404 Nikon AF-S Micro 60mm 1:2.8 Focus Ring Kit - Turtle Line in conjunction with a gear makes up a complete Focus Gear for this lens. This ring is part of the Turtle Line. You cannot use Teleconverters with this Nikon Lens, therefore cannot use our Tele Extensions Rings as well. The parts...
Availability: In Stock
MFR Part #: FA0001NC
Samy's Part #: S-027843
This Xit 404 Nauticam Fiber Optic Cable Adapter allows you to us use any fiber optic strobe cable on a Nauticam housing. Up until now you had to use Nauticam's proprietary cables. If you already own Sea&Sea or INON cables with our Inon to Sea & Sea Fiber Optic Connector, can plug directly into...
Availability: In Stock
MFR Part #: GM1001AQ
Samy's Part #: S-024887
The Xit 404 Aquatica Gear for Canon - Manta Line is part of the Manta Line and is designed to fit with approved Aquatica SLR housings for Canon cameras. It is for Aquatica housings made prior to the 5D MKIII. See our Chart of Verified Housings to determine if your model is supported. You must...
Availability: In Stock
MFR Part #: GM1002AQ
Samy's Part #: S-024888
The Xit 404 Aquatica Type 4 Gear for Canon Manta Line is part of the Manta Line and is designed to fit with approved Aquatica SLR housings for Canon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold separately)...
Availability: In Stock
MFR Part #: GM1003NC
Samy's Part #: S-024890
The Xit 404 Nauticam Gear for Canon Manta Line is part of the Manta Line and is designed to fit with approved Nauticam SLR housings for Canon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold separately) to...
Availability: In Stock
MFR Part #: GM1004SS
Samy's Part #: S-024891
The Xit 404 Sea & Sea Gear for Canon Manta Line is part of the Manta Line and is designed to fit with approved Sea & Sea SLR housings for Canon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold separately)...
Availability: In Stock
MFR Part #: GM2202SI
Samy's Part #: S-024892
The Xit 404 Sigma 15mm EXDG Fisheye Focus Ring - Manta Line in conjunction with a gear makes up a complete Focus Gear for this lens. This ring is part of the Manta Line made with impact resistant ABS plastic in gray color. Xit 404 has designed a group of interchangeable and complementary components...
Availability: In Stock
MFR Part #: GC1203NC
Samy's Part #: S-024894
The Xit 404 Nauticam Canon 8-15mm & 16-35mm II Zoom Gear is a one piece gear for these lenses. This Zoom Gear can fit both the Canon 8-15mm f/4L Fisheye USM and the EF 16-35 f/2.8L II USM lenses. The parts are constructed of impact resistant ABS plastic. The Zoom Ring is Red.
Refer to Xit 404's...
Availability: In Stock
MFR Part #: GN1002AQ
Samy's Part #: S-024897
The Xit 404 Aquatica Type 4 Gear - Manta Line is part of the Manta Line and is designed to fit with approved Aquatica SLR housings for Canon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold separately) to...
Availability: In Stock
MFR Part #: GN1003NC
Samy's Part #: S-024898
The Xit 404 Nauticam Gear for Canon - Manta Line is part of the Manta Line and is designed to fit with approved Nauticam SLR housings for Canon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold separately)...
Availability: In Stock
MFR Part #: GT1003NC
Samy's Part #: S-024901
The Xit 404 Nauticam Gear for Nikon - Turtle Line is part of the Turtle Line and is designed to fit with approved Aquatica SLR housings for Nikon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold separately)
...Availability: In Stock
MFR Part #: GT1004SS
Samy's Part #: S-024902
The Xit 404 Sea & Sea Gear for Nikon - Turtle Line is part of the Turtle Line and is designed to fit with approved Aquatica SLR housings for Nikon cameras. See our Chart of Verified Housings to determine if your model is supported. You must also select the appropriate Focus Ring (sold separately)...
Availability: In Stock
MFR Part #: GT320100
Samy's Part #: S-024904
The Xit 404 Tokina AT-X Fisheye 10-17mm Zoom Ring Kit - Turtle Line is part of the Turtle Line. This ring with a gear makes up a complete Focus Gear for this lens. The ring is made of impact resistant Gray ABS plastic.
Xit 404 has designed a group of interchangeable and complementary components...
Availability: In Stock
MFR Part #: KF0001AQ
Samy's Part #: S-024905
An Xit 404 Aquatica Focus Knob gives you the perfect control you need when performing that critical focus. It also makes it easier to zoom with a wide angle lens. The Focus Knob presses onto your existing knob, vinyl tape is included to ensure a snug fit. The focus knob is constructed of durable...
Availability: In Stock
MFR Part #: KF0004NC
Samy's Part #: S-024906
The Xit 404 Nauticam and Sea & Sea Focus Knob gives you the perfect control you need when performing that critical focus. It also makes it easier to zoom with a wide angle lens. The Focus Knob presses onto your existing knob, vinyl tape is included to ensure a snug fit. The focus knob is constructed...
Availability: In Stock
MFR Part #: KF0005NC
Samy's Part #: S-024907
The Xit 404 Nauticam Focus Knob For ELP3, EM5, NEX5n gives you the perfect control you need when performing that critical focus. It also makes it easier to zoom with a wide angle lens. The Focus Knob presses onto your existing knob, vinyl tape is included to ensure a snug fit. The focus knob is...
Availability: In Stock
MFR Part #: HG000100
Samy's Part #: S-024908
The Xit 404 HandGrip For 1 In. Ball Adapter And 1/2 In. Locline Mount is a useful pistol grip with a clamp for devices that have a 1" diameter ball or 1/2" Lock Line mount. The HandGrip has a pocket designed to clamp onto these mounts. The pistol grip comfortably fits in your hand or glove....
Availability: In Stock
MFR Part #: TS3008SS
Samy's Part #: S-024911
If you have lost your hardware for your Xit 404 Tripod Bracket, this Xit 404 Sea & Sea Housing Hardware Kit is the right kit for you. This Sea & Sea Hardware Kit is a replacement kit to secure your Tripod Bracket onto your Sea & Sea housing.
Availability: In Stock
MFR Part #: CV1001AQ
Samy's Part #: S-024915
The Xit 404 Aquatica Viewfinder Cap - Not Waterproof is used to keep dust and debris out of the inside of the housing when the viewfinder has been removed. If you remove your viewfinder for storage, packing, or shipping to protect it from damage then this cap is a quick way to close up the opening....
Availability: In Stock
MFR Part #: CV1002SS
Samy's Part #: S-024916
The XIT 404 Viewfinder Caps, Sea & Sea (Not Watertight) are used to keep dust and debris out of the inside of the housing when the viewfinder has been removed. If you remove your viewfinder for storage, packing, or shipping to protect it from damage then this cap is a quick way to close up the...
Availability: In Stock
MFR Part #: GZAQC815T14
Samy's Part #: S-026542
The Xit 404 Aquatica 8-15mm & 16-35mm II + 1.4X Tele Zoom Gear is a one piece gear for these lenses. This Zoom Gear can fit both the Canon 8-15mm f/4L Fisheye USM and the EF 16-35 f/2.8L II USM lenses with a 1.4X Tele. Fits with either a Tamron SP AF or Kenko Pro 300 DG. The parts are constructed...
Availability: In Stock
MFR Part #: OP1001AQ
Samy's Part #: S-027307
Handling your wet diopters underwater is a little tricky if you don't have a way to hold onto them. Mounting them to your port is an obvious solution. Xit 404 has taken this design concept and added its own flavor. The Xit 404 Diopter Single Mount Kit comes ready to attach Aquatica, SubSea, or...
Availability: In Stock
MFR Part #: OP3001AQ
Samy's Part #: S-027308
This holder lets you add another wet diopter to a Diopter Single Mount Kit. There are seven additional positions on the ring clamped onto your port. Select one of these positions and attach this Diopter Holder Add-on Kit to mount an additional Aquatica, SubSea, or Inon 67mm threaded wet diopter...
Availability: In Stock
MFR Part #: OP1019NC
Samy's Part #: S-027844
Handling your wet diopters underwater is a little tricky if you don't have a way to hold onto them. Mounting them to your port is an obvious solution. Xit 404 has taken this design concept and added their own flavor. The Diopter Single Mount Kit Nauticam 75 comes ready to attach Aquatica, SubSea, or Inon...
Availability: In Stock
MFR Part #: CB1005NC
Samy's Part #: S-032773
The Nauticam Body Cap is a cover that attaches to the port opening on the housing the same way a port attaches. Keep your underwater housing and its sync cable safe with a Body Cap. The cap is made from durable impact resistant Red plastic.
UW Housing Caps are available for a variety of underwater...
UW Housing Caps are available for a variety of underwater...
Availability: In Stock
MFR Part #: CB1021NC
Samy's Part #: S-032774
The Nauticam Micro 4/3rds Port Cap is a cover that attaches to open end of a port. This is for Nauticam Micro 4/3rds Ports and Extension Rings Only. This allows you to store other items such as our Manta gears inside when packing for a trip. We suggest that you put some bubble wrap in to protect...
Availability: In Stock
MFR Part #: CB1006SS
Samy's Part #: S-032775
The Sea & Sea Body Cap is a cover that attaches to the port opening on the housing the same way a port attaches. Included with the cap is a hot shoe receptacle that secures the sync cable from hanging loose inside the housing. Keep your underwater housing and its sync cable safe with a Body Cap....
Availability: In Stock
MFR Part #: CP1005NC
Samy's Part #: S-032776
The Xit 404 Nauticam Port Cap is a cover that attaches to open end of a macro or wide angle port. This allows you to store other items such as our Manta gears inside when packing for a trip. We suggest that you put some bubble wrap in to protect your port glass first. If you stack your extension...
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE