All Products
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
SmallRig
MFR Part #: 2096B
Samy's Part #: S-063820

The SmallRig Cage Kit for Sony a7 III and a7R III is designed for Sony A7RIII/A7III. It offers great protection and lots of additional attachment options for the cameraman. It enables the camera to release its potential to the utmost as per the needs of cameraman during shooting. It includes A7RIII...
Availability: More In Transit
$15990
QTY
SmallRig
MFR Part #: BSE2346
Samy's Part #: S-063858

The SmallRig Swivel and Tilt Monitor Mount with Cold Shoe Mount is designed to hold your monitor onto the top of camera or other mounting system via cold shoe adapter. The holder enables to swivel 360° sideways and tilt 140° which allows to hold your monitor onto any position without using tools. The robust mount...
Availability: In Stock
Ships next business day
$3690
QTY
SmallRig
MFR Part #: 2203
Samy's Part #: S-063805

The SmallRig Full Cage for Blackmagic Pocket Cinema Camera is a form-fitting cage. It is securely locked to the camera by 1/4’’-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles and scratches. On the top and left side of the cage are built-in NATO rails, where...
Availability: In Stock
Ships next business day
$7900
QTY
SmallRig
MFR Part #: 1138
Samy's Part #: S-063832

The SmallRig Multi-function Double BallHead with Clamp and 1/4 in. Screw is a Multi-Function Double Ball Head with bottom clamp and 1/4" screw. It can Mount Monitors and led Lights to DSLR,  360º Articulation. 1/4"-20 Screw on Top. It can be mounted directly to a DSLR or camcorder, and allows...
Availability: More In Transit
$1290
QTY
SmallRig
MFR Part #: 1135
Samy's Part #: S-063842

The SmallRig Double Ball Head with Cold Shoe and 1/4 in.-20 Stud is a Multi-Function Double Ball Head on both ends with shoe adapter and 1/4" screw. It can mount Monitors and led Lights to DSLR, 180º Articulation. 1/4"-20 Screw on Top. It can be mounted directly to a DSLR or camcorder's shoe mount,...
Availability: In Stock
Ships next business day
$790
QTY
SmallRig
MFR Part #: 2174
Samy's Part #: S-063849

The SmallRig Articulating Monitor Mount with ARRI Locating Pins is designed to hold your monitor onto any cage with arri 3/8”-16 threaded hole on the top middle such as SmallRig Cage 2087 or handle with an arri 3/8”-16 threaded hole in front such as Nato Handle1955. It enables to adjust the position of monitor...
Availability: In Stock
Ships next business day
$4900
QTY
SmallRig
MFR Part #: 1092
Samy's Part #: S-063873

The SmallRig Multi-Purpose Mounting Cheese Plate is equipped with plenty of 1/4’’-20 and 3/8"-16 holes, allowing you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system.
Availability: In Stock
Ships next business day
$2790
QTY
SmallRig
MFR Part #: BSS2250
Samy's Part #: S-063867

The SmallRig Dual Handgrip for DJI Ronin-S or Ronin-SC Gimbal is designed to operate your Ronin-S and Ronin-SC gimbal with both hands to reduce one handed fatigue. The dual handle attaches to Ronin-S and Ronin-SC via a ratchet knob and features rubber inside of the mounting socket to prevent scratching the Gimbal....
Availability: In Stock
Ships next business day
$9900
QTY
SmallRig
MFR Part #: 2243
Samy's Part #: S-063802

The SmallRig Cage for Nikon Z6/Z7 Cameras is a form-fitted cage which is designed to provide all-around protection and mounting options for Nikon Z6 and Z7. The cage is fixed on the camera via the bottom 1/4"-20 threaded hole and features a m2.5 threaded hole on the left side as a second lock point to prevent the camera form...
Availability: More In Transit
$8900
QTY
SmallRig
MFR Part #: 1798
Samy's Part #: S-063869

The SmallRig Tripod Mounting Kit with 2 x Plates and 2 x 15mm Rod Clamps is combined by two SmallRig Tripod mounting plate w/15mm rail block. Used for long length, front heavy, camera packages. Attach it to the tripod plate with a 3/8''-16 screw and 1/4''-20 screw, then you can mount your dovetail...
Availability: More In Transit
$6000
QTY
SmallRig
MFR Part #: CCC2271
Samy's Part #: S-063804

The SmallRig Cage for Canon 5D Mark III or 5D Mark IV is a custom and form-fitted cage designed to provide an all-around protection and mounting options for Canon 5D Mark III IV. It locks camera firmly via 1/4’’ screws at the bottom. And it protects camera from twisting and scratching. Attached Slotted screwdriver on...
Availability: More In Transit
$9900
QTY
SmallRig
MFR Part #: 2044B
Samy's Part #: S-063837

It includes a 1/4’’ counterbore slot and a cold shoe. 1/4’’ counterbore slot could be mounted on the 1/4’’ threaded holes on the right side of Sony A6500 Cage 1889. The arrowheads on the cold shoe point to anti-off direction. The cold shoe is compatible with RODE microphone, wireless microphone...
Availability: In Stock
Ships next business day
$1200
QTY
SmallRig
MFR Part #: 2094
Samy's Part #: S-063863

The SmallRig Cold Shoe Handle is designed for DSLR cameras and cages. It offers lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of cameraman during shooting.

It is equipped with an abundance of 1/4’’-20 and 3/8’’-16 threaded holes...
Availability: In Stock
Ships next business day
$4900
QTY
SmallRig
MFR Part #: 2251
Samy's Part #: S-063808

The SmallRig Cage for Canon EOS R is custom designed and form-fitting. It mounts to the camera's tripod socket with a 1/4’’-20 screw, with anti-twist design and rubber cushion on the base plate to prevent twisting. It comes with multiple 1/4’’-20 and 3/8’’-16 threaded holes allowing mount of a...
Availability: In Stock
Ships next business day
$9900
QTY
SmallRig
MFR Part #: 2060
Samy's Part #: S-063830

The SmallRig Cold Shoe 2-Pack could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block and plate etc. The counterbore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted...
Availability: In Stock
Ships next business day
$890
QTY
SmallRig
MFR Part #: CCP2488
Samy's Part #: S-064845

The SmallRig Cage for Panasonic S1H is designed to provide protection and accessory mounts for S1H. The cage secures to the bottom of camera via 1/4”-20 and m2.5 screws to prevent twisting. Multiple 1/4"-20 and ARRI 3/8”-16 accessory threads around the cage allows to mount Monitor Mount 2294,...
Availability: In Stock
Ships next business day
$8900
QTY
SmallRig
MFR Part #: 2228
Samy's Part #: S-063803

The SmallRig Cage for Fujifilm X-T2 and X-T3 Cameras is a form-fitted cage which is designed to provide all-around protection and mounting options for camera. The cage features an integrate side handle to provide comfortable handheld shooting. It is fixed on the camera via the bottom 1/4"-20 threaded hole and with anti-twist design. The one piece aluminum...
Availability: In Stock
Ships next business day
$8900
QTY
SmallRig
MFR Part #: 2077
Samy's Part #: S-064857

The SmallRig 
Universal Shoulder Pad with 15mm LWS Rod Clamp is exclusively designed for universal cameras, be it large or small. It is the perfect choice for DSLR, mirrorless cameras and small cameras. It includes Universal Shoulder Pad 2057 and 15mm RailBlock 942. It offers an abundance of po...
Availability: In Stock
Ships next business day
$7900
QTY
SmallRig
MFR Part #: 1638B
Samy's Part #: S-063862

The SmallRig Top Handle with Cold Shoe is the original design. 1/4"-20 mounting points in front is for accessory mounting, such as Cold Shoe Mount. The cold shoe base on the top is used to mount standard shoe accessories.
Availability: More In Transit
$1990
QTY
SmallRig
MFR Part #: 2014C
Samy's Part #: S-064843

The SmallRig Accessory Kit for Sony a7 II, a7R II, and a7S II Cameras is made up of the cage, HDMI cable clamp and top handle, and it totally meets the demands of the clients while shooting in handheld motion. The 1/4 threaded holes in the top handle could be attached with EVF support 1903 so...
Availability: In Stock
Ships next business day
$15190
QTY
SmallRig
MFR Part #: 1889B
Samy's Part #: S-063809

The SmallRig Cage for Sony a6500/a6300 Cameras is a form-fitted cage designed to provide all-around protection and mounting options for Sony A6300 and A6500. The cage is fixed on the camera via the 1/4"-20 threaded hole on the bottom and a m2.5 threaded hole on the right side as a second lock point to prevent the camera from...
Availability: In Stock
Ships next business day
$2990
QTY
SmallRig
MFR Part #: 2049
Samy's Part #: S-063806

The SmallRig Cage for Panasonic GH5/GH5S benefits your Panasonic GH5 camera in video production by strengthening protection and stability and providing more mounting options. The cage fits the camera perfectly, and it does not block any access to the SD card slot, battery compartment, and all camera controls....
Availability: In Stock
Ships next business day
$8900
QTY
SmallRig
MFR Part #: 2245
Samy's Part #: S-063835

The SmallRig Samsung T5 SSD Mount for Select Blackmagic Cages is a dedicated mounting solution working with SmallRig Cage for BMPCC 4K & 6K 2203, CVB2254 and CVB2255, and SmallRig Cage for Z cam E2 2264. It is fixed to the cage by two M4 screws. Knob screws are designed to lock the T5 SSD and...
Availability: In Stock
Ships next business day
$2390
QTY
SmallRig
MFR Part #: CCS2416
Samy's Part #: S-065494

The SmallRig Cage for Sony a7R IV is a form-fitting full cage. The camera is fixed by a 1/4 screw on the bottom and a M2.5 screw on the side. It comes with multiple 1/4’’-20 and 3/8’’-16 threaded holes, ARRI locating holes, a built-in NATO rail and a cold shoe, allowing mount of different accessories....
Availability: In Stock
Ships next business day
$6990
QTY
SmallRig
MFR Part #: 1658
Samy's Part #: S-063817

Why is called versatile cage? It means you could fit almost every DSLR in that tiny little cage. There are three different lengths of side bars make that it possible to attach different cameras. Using one 1/4'' screw and the hot shoe mount will lock your camera solid and firmly.Integrated mounting
...
Availability: In Stock
Ships next business day
$6760
QTY
SmallRig
MFR Part #: 2129B
Samy's Part #: S-063818

The SmallRig Cage for Nikon D850 provides form-fitting protection to the Nikon D850, and provides multiple mounting interfaces. It mounts to the camera's tripod socket with a 1/4’’-20 screw and prevents twisting around the camera. On the top SmallRig handles such as 1984 can be mounted. The built-in...
Availability: In Stock
Ships next business day
$9900
QTY
SmallRig
MFR Part #: 2097B
Samy's Part #: S-063826

The SmallRig Cage Kit with Wooden Grip for Sony a6500 offers lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of cameraman during shooting. SmallRig Cage 1889 fits the camera perfectly and locks the camera via 1/4'' screw at the bottom and...
Availability: In Stock
Ships next business day
$5499
QTY
SmallRig
MFR Part #: 2169
Samy's Part #: S-063834

The SmallRig VCT-14 Quick Release Tripod Plate is Sony VCT-14 standard which enables you to quick attach and remove your camcorder from a tripod adapter by using the lever release. The all metal construction plate offers a v-wedge adapter which is coincidence with the Standard VCT-14 Shoulder Plate....
Availability: In Stock
Ships next business day
$14900
QTY
SmallRig
MFR Part #: CMA2209
Samy's Part #: S-063868

The SmallRig Cage for Atomos Ninja V was co-designed with Atomos to provide an additional protective exo-skeleton for the monitor, with a wide range of industry standard mount points. The cage mounts to the monitor by a 1/4’’-20 screw on the top and two M3 screws on the left side. Across the top and bottom the cage features multiple 1...
Availability: In Stock
Ships next business day
$12900
QTY
SmallRig
MFR Part #: BSS2276
Samy's Part #: S-064840

The SmallRig Handgrip for DSLR Cameras and Zhiyun-Tech WEEBILL LAB Gimbal is designed to hold your gimbal to enter a handy underslung position and provide multiple mounting points for accessories. The handle is attached to WEEBILL LAB via a 1/4”thumbscrew and two locating pins which is correspond with the holes...
Availability: In Stock
Ships next business day
$7900
QTY
SmallRig
MFR Part #: 1995
Samy's Part #: S-063853

The SmallRig 15mm Rod Clamp is equipped with two counterbore holes and one 1/4’’ threaded hole. It could attach SmallRig handles 1955 via two M4 screws, and it could work with 15mm rod for Microphone Shock Mount 1802. In other scenario, it works with 15mm rod for Single RailBlock 860 or Mini Mounting Plate...
Availability: In Stock
Ships next business day
$990
QTY
SmallRig
MFR Part #: BUN2521
Samy's Part #: S-065493

The SmallRig 1.9 in. ARRI Accessory Mount NATO Rail attaches to ARRI-standard accessory mounts using a 3/8”-16 screw and two locating pins. It features a NATO rail on the top, compatible with NATO accessories like SmallRig NATO Handle 1955 or 2187, SmallRig Ball Head Arm 2071, SmallRig NATO Clamp...
Availability: More In Transit
$1990
QTY
SmallRig
MFR Part #: 2087B
Samy's Part #: S-063819

The SmallRig Cage for Sony a7R III and a7 III Series is exclusively designed for Sony A7RIII/A7M3/A7III. It could offer lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of cameraman during shooting.

It is equipped with a cold shoe...
Availability: In Stock
Ships next business day
$8900
QTY
SmallRig
MFR Part #: KGW101
Samy's Part #: S-065488

The SmallRig Advanced Universal Shoulder Mount Kit
 is exclusively designed for small sized cameras. It offers an abundance of possibilities for the cameraman as per the needs during shooting, thus it is very beneficial and convenient for the cameraman.
Availability: More In Transit
$25890
QTY
SmallRig
MFR Part #: 2103B
Samy's Part #: S-063827

The SmallRig Cage Kit for Sony a7 III Series Cameras is exclusively designed for Sony A7RIII/A7III. It includes 4 parts, namely Double End Ball Head 1135, A7R III Cage 2087, Safety Rail 1409 and NATO Handle 1955. NATO Handle 1955 could be mounted on Safety Rail 1409 for handeld shooting. It is equipped with an abundance...
Availability: In Stock
Ships next business day
$14599
QTY
SmallRig
MFR Part #: 2052
Samy's Part #: S-062103

The Cage with Helmet Kit for Panasonic LUMIX GH5/5S & DMW-XLR1 includes GH5/GH5S Cage 2049 and Helmet Kit 2017. Cage 2049 attaches to Helmet Kit 2017 via two 1/4’’ counterbores. The handle on Helmet Kit could be adjusted up and down and forwards and backwards for balance as per your needs during shooting, and it could...
Availability: In Stock
Ships next business day
$16900
QTY
PAGE 0 OF 0 | 0 OF 0
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]