CONTACT US AT 800-321-4726
All Products
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 756040
Samy's Part #: MATT756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B756040
Samy's Part #: MATTB756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: On Backorder
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756140
Samy's Part #: MATT756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: On Backorder
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350605
Samy's Part #: S-006326

MICRO Shot Bag used to counterbalance weight in Matthews MICROgrip line of gear.
Availability: In Stock
$1495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756020
Samy's Part #: MATT756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
$15280
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: H377573
Samy's Part #: MATTH377573

Roller Stands or Overhead Stands as they are often called utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios these stands feature wide bases for stability and terminate in the new 4 .5" Grip Head. Both the Hi-Hi...
Availability: In Stock
$39120
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B427802
Samy's Part #: MATTB427802

Designed because of the growing demand for a boom which would not bend when an array of accessories are added to small lighting fixtures or strobes such as light banks egg crates etc. Made completely out of steel the Mini Boom mounts on a 5/8" Baby Pin and will extend 7 feet terminating in a 5/8"...
Availability: In Stock
$16320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B387485
Samy's Part #: MATTB387485

Designed primarily for their use in lighting kits these stands are compact and light weight. They are ideal for assembling custom lighting kits or as a replacement. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings therefore permitting...
Availability: In Stock
$12000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: H377577
Samy's Part #: MATTH377577

With Rocky Mountain Leg. Roller Stands or Overhead Stands as they are often called utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios these stands feature wide bases for stability and terminate in the new 4 .5"...
Availability: In Stock
$44880
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 655040
Samy's Part #: MATT655040

The head on these arms now feature two holes 3/8" and 5/8" eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it!
Availability: In Stock
$6400
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429029
Samy's Part #: MATT429029
Machined from solid steel The Stand Adapter is exceptionally strong. Used to convert Junior 1-1/8" female to Baby 5/8" male.
Availability: In Stock
$2320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429618
Samy's Part #: MATT429618

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin attached....
Availability: In Stock
$3440
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 420110
Samy's Part #: MATT420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 169062
Samy's Part #: MATT169062

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: In Stock
$4335
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 549120
Samy's Part #: MATT549120

The flat edges of the Matthews 48x48 In. Diffusion Frame (Knife Blade) make it ideal for quick gel changes with 2 sided tapes. It does not require removing the frame for replacing the gel.

Features:
  • Easy and quick removal of gel
  • Flat edges for sticking double sided tape
Availability: On Backorder
$8160
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 169059
Samy's Part #: MATT169059

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: In Stock
$3910
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B427080
Samy's Part #: S-024499

The Matthews Maxi Matthpole Black (8-14.9 ft.) is stronger and more durable than any similar product. Unique "expanding casting" provides the pressure for holding the Matthpole in place. Used primarily in studios for mounting seamless paper and backdrops with the use of Super Mafer Clamps and...
Availability: On Backorder
$14320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 387402
Samy's Part #: MATT387402

Designed primarily for use in lighting kits, this stand is compact and light weight. It is ideal for assembling custom lighting kits or as a replacement. This black finish aluminum stand has 3 riser sections. Many Matthews Revenger Stands employ a " Brake Shoe " system for locking off the riser tubes as...
Availability: In Stock
$6800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 299555
Samy's Part #: MATT299555

Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with...
Availability: On Backorder
$3395
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 756120
Samy's Part #: MATT756120
This Matthews Century Plus kit consists of a C Plus Stand with 20 inch riser and removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The maximum height of this stand with the arm extended is 5.25' (1.6 m). The stand itself rises to...
Availability: In Stock
$18800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 169001
Samy's Part #: MATT169001

The Matthews 30x36 In. Flag use only a single, horizontally angled support arm which allows for 'close-in', right angle, tight positioning over set walls and interlocking of flags to establish a tightly controlled spread of light. The flags are used to control natural or artificial light beside...
Availability: On Backorder
$5525
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 299886
Samy's Part #: MATT299886

This versatile, stainless steel shot bag quickly wraps around the base of any stand column, brace, tee handle, arm or boom. By placing the weight directly below the weight of the fixture, the weight is actually directed straight down the stand's vertical column, holding it firmly in place. The...
Availability: In Stock
$3200
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 427802
Samy's Part #: MATT427802

The Matthews Mini Boom is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a sandbag...
Availability: On Backorder
$16320
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 149566
Samy's Part #: MATT149566

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
$5015
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 299887
Samy's Part #: MATT299887

This versatile, stainless steel shot bag quickly wraps around the base of any stand column, brace, tee handle, arm or boom. By placing the weight directly below the weight of the fixture, the weight is actually directed straight down the stand's vertical column, holding it firmly in place. The...
Availability: In Stock
$4240
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B387489
Samy's Part #: S-013244

The Matthews 7.5 ft. MERF Mini Extendable Reverse Stand is a small, robust light stand with reverse folding legs. A new concept in small, robust kit stands which features a secure clamping system that eliminates T-Handles. Stuff it into your backpack or small portable lighting kit. When you get...
Availability: In Stock
$7040
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: B119738
Samy's Part #: MATTB119738

The Matthews Pivoting Yoke for Matthboard (Black) is a positive lock off yoke made to hold Expendable Reflectors, gives the same feel and look as a conventional hard board yoke.

Features:
  • Gives the same look as conventional hard board yoke
  • Made to hold expendable reflectors
Availability: In Stock
$12880
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350628
Samy's Part #: S-028880

This clever Matthews Quick Release Adapter for NOGA Arm allows you to make quick changes to your equipment without having to mess with screws and threads. In low light, tight spaces or no time to lose, pull back the red sleeve and drop your preloaded monitor, mic, light or whatever into the Quick...
Availability: In Stock
$8500
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 350596
Samy's Part #: MATT350596

Matthews Road Rags are portable lighting modification system that allows the location photographer/videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. The elastic corded frames easily fold for storing and transporting. A simple...
Availability: In Stock
$40120
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 387485
Samy's Part #: S-031325

Designed primarily for use in lighting kits, the Matthews Maxi Kit Steel Stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch c...
Availability: In Stock
$12000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 415177
Samy's Part #: S-042848

The Matthews Freedom Car Mount System allows you to mount a heavier cinema camera on a car, truck, boat or other non-porous surface with freedom and ease of movement, rotating 360 degrees and allowing for 90-degree swivel. Many independent and big-budget filmmakers find themselves in a special...
Availability: In Stock
$1,30160
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: 159015
Samy's Part #: MATT159015

The Matthews Solid Frame Scrim White Artificial Silk (48x48 In.) is a handy accessory to keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames are black powder coated to minimize...
Availability: On Backorder
$10625
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 209495
Samy's Part #: MATT209495

The Matthews Foam Core Holder is manufactured with a pivoting ball that locks for easier adjustment of the foam core or bead board that you tape onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set.
Availability: On Backorder
$4495
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429627
Samy's Part #: S-045661

The Matthews Infinity Arm Kit is a versatile cine arm used to mount cameras, lights, monitors and anything else you require. The Infinity Arm is a fully articulated arm equipped with 360 degrees rotate-able and interchangeable, ball-in-socket, quick release tips for adding and removing accessories...
Availability: In Stock
$29900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: 429492
Samy's Part #: MATT429492

Most TV lighting instruments have a hole in the yoke for the mounting of a C-Clamp. When one of these fixtures needs to be mounted on a stand the TVMP Adapter makes this easy. With an external diameter to fit into a Junior receiver and a 5/8" female bore for mounting on a Baby pin the threaded...
Availability: In Stock
$1440
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]