Photography
Send now or schedule for a future delivery date!
Video & Audio
Send now or schedule for a future delivery date!
Studio & Lighting
Send now or schedule for a future delivery date!
Electronics
Send now or schedule for a future delivery date!
Smartphone
Send now or schedule for a future delivery date!
Pre-Owned
Send now or schedule for a future delivery date!
Classes & More
Send now or schedule for a future delivery date!
My Cart
My Cart
Categories + Filters
MFG# Z-FSO-M
Samy's Part# KTEKZFSOM
Availability: In Stock
The K-Tek Zeppelin Slip-On Windscreen (Medium) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Eligible for FREE 1-3 Day Shipping
MFG# K-4NK
Samy's Part# S-047522
Availability: In Stock
The K-Tek XLR Male to Low-Profile Right-Angle XLR Female Coiled Microphone Cable (3-15 In.) is a 3 inches coiled cable that can extend up to 15 inches for use with on-camera mics. It comes with a Neutrik XLR male & K-Tek compact, low-profile angled female connector.
Features:
- 3 inches cable
Compare
$39.90
MFG# KSUS
Samy's Part# KTEKKSUS
Availability: In Stock
The K-Tek Polymer Microphone Suspenders for Shockmounts (Pair) is a rugged replacement accessory pair of polymer Microphone suspenders, featuring a 4 point design that provides optimal shock and motion isolation, for use with Shockmounts. The K-SUS Suspenders are spaced 2″ (5cm) equipped with...
Compare
$22.90
MFG# KTEKB
Samy's Part# S-016142
Availability: In Stock
The K-Tek Case for the iPhone 4 and 4S is made from a solid piece of machined aluminum, and then anodized for a high quality finish. It features two 1/4x20 threaded holes for mounting your iPhone on a K-Tek Tadpole, tripod, or anything with a 1/4x20 threaded stud. Its unique design eliminates...
Compare
$10.00
MFG# KEG150CCR
Samy's Part# S-067032
Availability: In Stock
The K-Tek KEG-150CCR Avalon Series Graphite Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. Its sturdy graphite design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This...
Eligible for FREE 1-3 Day Shipping
MFG# KEG100CCR
Samy's Part# S-071163
Availability: In Stock
The K-Tek KEG-100CCR Avalon Series Graphite Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. Its sturdy graphite design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This...
Eligible for FREE 1-3 Day Shipping
MFG# KSSM
Samy's Part# KTEKKSSM
Availability: In Stock
The K-Tek Short Microphone Shock Mount is the shorter alternative to the KSM. Every bit as much of a workhorse for ENG crews as the larger KSM, the tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSSM. With a machined aluminum frame,...
Eligible for FREE 1-3 Day Shipping
MFG# KSWB1
Samy's Part# S-047519
Availability: In Stock
The K-Tek KSWB1 Stingray Waistbelt for Small Audio Mixer/Recorder Bags is the perfect companion for the Stingray Junior or the Stingray Small Audio Bags. The waist belt has an inner belt which keeps the belt secure with or without the mixer bag. This is facilitated via one quick buckle on each...
Eligible for FREE 1-3 Day Shipping
MFG# KMT
Samy's Part# S-024219
Availability: In Stock
The K-Tek K-Mount Microphone Shock Mount Suspension System offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. The tough microphone cage, strong grip on the microphone...
Eligible for FREE 1-3 Day Shipping
MFG# KCAMSSM
Samy's Part# KTEKKCAMSSM
Availability: In Stock
The K-Tek Camera Shoemounting Shock Mount for Sanken CS-1 is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb vibration...
Eligible for FREE 1-3 Day Shipping
MFG# K-CAM-SM
Samy's Part# KTEKKCAMSM
Availability: In Stock
The K-Tek Camera Shoemounting Shock Mount for Shotgun Microphones is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb...
Eligible for FREE 1-3 Day Shipping
MFG# Z-FSO-S
Samy's Part# KTEKZFSOS
Availability: In Stock
The K-Tek Zeppelin Fuzzy Slip-On Windscreen (Short) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek’s unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing – making the Fuzzy the only slip-on windscreen...
Eligible for FREE 1-3 Day Shipping
MFG# KTADL
Samy's Part# S-011230
Availability: In Stock
The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Eligible for FREE 1-3 Day Shipping
MFG# KSPT
Samy's Part# S-015064
Availability: In Stock
The K-Tek Shoe Plate Mount provides a flat surface for mounting accessories including audio transmitter receivers and recorders to the top of shoe on a camera.
Compare
$44.90
MFG# KHG
Samy's Part# KTEKKHG
Availability: In Stock
The K-Tek Foam Lined Hand Grip with Boom Pole Head (6 In.) is a deluxe Pistol Grip for use with Shockmounts offering a boompole head and 3/8" threading for attachment. The foam covered graphite design offers both minimal weight and maximize handling isolation with considerable noise reduction....
Compare
$42.90
MFG# KTZOOMH6XY
Samy's Part# S-047531
Availability: In Stock
The K-Tek Microphone Windscreen Topper for Zoom H6 XY Capsule is made of high-grade synthetic black short hair fur and it is designed for Zoom H6 handy recorder. Toppers are designed to protect the recorder against the noise by high wind and to produce optimum results. Simply moving a recorder...
Compare
$41.90
MFG# K-6NN
Samy's Part# S-047523
Availability: In Stock
The K-Tek XLR Male to XLR Female Coiled Microphone Cable (6 In. To 4 ft.) is an approximately 6 inches coiled cable that extends to 4 feet and is made for use with boom pole products. It comes with Neutrik XLR male and female connectors.
Features:
- 6 inches cable extends up to 4 feet
- For boom
Compare
$39.90
MFG# K-4NN
Samy's Part# S-047517
Availability: In Stock
The K-Tek XLR Male to XLR Female Coiled Cable (4 In.) is an approximately 4 inches coiled cable that extends to 2.75 feet and is intended for use with boom pole products. It comes with Neutrik XLR male and female connectors.
Features:
- 4 inches cable extends up to 2.75 feet
- For boom pole products
Compare
$39.90
MFG# KN2269
Samy's Part# S-018307
Availability: In Stock
The K-Tek KN2269 Norbert Top Handle is a foam-covered graphite handle that can be mounted on the top plate of any Norbert camera support frame for handheld operation.
MFG# KSSA
Samy's Part# S-015062
Availability: In Stock
The K-Tek Shoe Step Adapter repositions the shoe 2
MFG# KTBAR9
Samy's Part# S-011234
Availability: In Stock
A 9" machine aluminum standard shoe bar on a Delrin shoe, allows for mounting multiple accessories on a camera shoe.
Compare
$32.90
MFG# KTBAR
Samy's Part# S-011233
Availability: In Stock
A 6" machine aluminum standard shoe bar on a Delrin shoe, allows for mounting multiple accessories on a camera shoe.
Compare
$32.90
MFG# KTADM
Samy's Part# S-016144
Availability: In Stock
The K-Tek Mini Tadpole Camera Boom Pole (7.5") is a single-section boom pole designed for small cameras such as the iPhone and GoPro Hero. The pole is not extendable and is always 7.5" in length. It features a tilting ball and socket head which allows you to precisely position your small camera...
Compare
$30.00
MFG# KTPRFF
Samy's Part# KTEKKTPRFF
Availability: In Stock
The K-Tek Faux Fur Topper for Handheld Microphones (Black) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing. The system's body of open cell...
Compare
$25.00
MFG# KBRGS
Samy's Part# S-011232
Availability: In Stock
A 4" machined aluminum shoe bridge that sits 4" over the camera and can offset accessories to one side. The cold shoe is made of industrial Delrin.
Compare
$25.00
MFG# KBWC
Samy's Part# KTEKKBWC
Availability: In Stock
The K-Tek K-BWC 3/8" Threaded Camera Microphone Ring Adapter for Canon fits in most DV Camera microphone collars and adapts to 3/8 in. -16 thread. This makes mounting professional microphones to the camera very simple and versatile. This allows easy adaptation of a variety of accessories to the...
Compare
$1.00
MFG# KP9CCR
Samy's Part# S-064262
Availability: More Coming Soon
The K-Tek KP9CCR 9 ft. KlassicPro Graphite 6-Section Boompole with Internal XLR Coiled Cable, Side Exit features a removable headpiece for cable reconfiguration without soldering. The top attachment is a 3/8" male thread that includes a coiled cable with a KlassicPro right angle connector and...
Eligible for FREE 1-3 Day Shipping
MFG# KE79CCR
Samy's Part# S-031220
Availability: Special Order
The K-Tek KE79CCR Traveler Aluminum Boompole with Internal Coiled XLR Cable (Right Angled) has a collapsed length of 1'8″/51cm and an extended length of 6'7″/201cm and only weighs 1.45lbs/658g. This 6-section Aluminum Traveler Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Eligible for FREE 1-3 Day Shipping
Compare
$294.90
Notice: This item is non-returnable
Special Order
Call to order: 1-800-321-4726
Eligible for FREE 1-3 Day Shipping
MFG# KE110CCR
Samy's Part# KTEKKE110CCR
Availability: More Coming Soon
This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (9 ft.) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.813 lbs (822g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Eligible for FREE 1-3 Day Shipping
MFG# KE110CC
Samy's Part# KTEKKE110CC
Availability: Special Order
This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.723 lbs ( 781g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ - 16 male...
Eligible for FREE 1-3 Day Shipping
MFG# KE79CC
Samy's Part# KTEKKE79CC
Availability: More Coming Soon
This K-Tek Traveler Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 1.8 feet (51cm) and an extended length of 6.7 feet (201cm) with only weight of 1.452 lbs (659g). This 6-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread...
Eligible for FREE 1-3 Day Shipping
MFG# KE110
Samy's Part# KTEKKE110
Availability: Special Order
This K-Tek Avalon Series Aluminum Boompole (Uncabled) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.458 lbs (661g). This 5-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ - 16 male thread and the bottom attachment...
Eligible for FREE 1-3 Day Shipping
MFG# KE89CC
Samy's Part# KTEKKE89CC
Availability: Special Order
This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Eligible for FREE 1-3 Day Shipping
MFG# KGPS
Samy's Part# KTEKKGPS
Availability: Special Order
The K-Tek K-GPS Universal Microphone Suspension Mount is a versatile suspension system featuring K-Teks unique K-SUS polymer suspenders. It is a lightweight shock mount designed to fit a wide range of microphones. Equipped with a swivel mount with standard 3/8-16 thread.
Features:
- Versatile
Eligible for FREE 1-3 Day Shipping
MFG# KSM
Samy's Part# KTEKKSM
Availability: More Coming Soon
The K-Tek Microphone Adjustable Shock Mount for Boompoles is the workhorse for ENG crews worldwide. A tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSM. With a machined aluminum frame, the microphone is actually held firmly in...
Eligible for FREE 1-3 Day Shipping
MFG# Z-FSO-L
Samy's Part# KTEKZFSOL
Availability: More Coming Soon
The K-Tek Zeppelin Slip-On Windscreen (Long) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Eligible for FREE 1-3 Day Shipping
Showing 0 of 0
