CONTACT US AT 800-321-4726
All Products
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: K-4NN
Samy's Part #: S-047517

The K-Tek XLR Male to XLR Female Coiled Cable (4 In.) is an approximately 4 inches coiled cable that extends to 2.75 feet and is intended for use with boom pole products. It comes with Neutrik XLR male and female connectors.

Features:
  • 4 inches cable extends up to 2.75 feet
  • For boom pole products
...
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KHG
Samy's Part #: KTEKKHG

The K-Tek Foam Lined Hand Grip with Boom Pole Head (6 In.) is a deluxe Pistol Grip for use with Shockmounts offering a boompole head and 3/8" threading for attachment. The foam covered graphite design offers both minimal weight and maximize handling isolation with considerable noise reduction....
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE79CC
Samy's Part #: KTEKKE79CC

This K-Tek Traveler Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 1.8 feet (51cm) and an extended length of 6.7 feet (201cm) with only weight of 1.452 lbs (659g). This 6-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ – 16 male thread...
Availability: In Stock
$23275
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KSM
Samy's Part #: KTEKKSM

The K-Tek Microphone Adjustable Shock Mount for Boompoles is the workhorse for ENG crews worldwide. A tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSM. With a machined aluminum frame, the microphone is actually held firmly in...
Availability: In Stock
$12350
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE110CCR
Samy's Part #: KTEKKE110CCR

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (9 ft.) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.813 lbs (822g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KMTS
Samy's Part #: S-047516

The K-Tek K-Mount Microphone Shock Mount Suspension System (Short Version) offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. This KMTS is the short version designed...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KBLT35B
Samy's Part #: S-047514

The K-Tek KBLT35B Boom Pole Case (Small) is a three sided case with a semi-hard clam-shell design with zippers and a removable inside pouch. This new boom pole case is made using a three-layer lamination process for extreme strength to weight ratio. The external black fabric is a rip-stop nylon....
Availability: In Stock
$17575
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KSTGJ
Samy's Part #: S-047524

The K-Tek Stingray Junior - Audio Mixer Recorder Bag is designed specifically for small rigs with a couple of wireless receivers and transmitters. Designed to work with the Sound Devices 633, Zaxcom Maxx and many similar sized mixer recorders, the Stingray Junior features most of the same features...
Availability: In Stock
$23275
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$17955
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTADL
Samy's Part #: S-011230

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$5900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KSWB1
Samy's Part #: S-047519

The K-Tek KSWB1 Stingray Waistbelt for Small Audio Mixer/Recorder Bags is the perfect companion for the Stingray Junior or the Stingray Small Audio Bags. The waist belt has an inner belt which keeps the belt secure with or without the mixer bag. This is facilitated via one quick buckle on each...
Availability: In Stock
$7505
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTZOOMH5
Samy's Part #: S-047530

The K-Tek Microphone Windscreen Topper for Zoom H5 is made of high-grade synthetic black short hair fur and it is designed for Zoom H5 handy recorder. Toppers are designed to protect the recorder against the noise by high wind and to produce optimum results. Simply moving a recorder microphone...
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTADM
Samy's Part #: S-016144

The K-Tek Tadpole 3 Section Aluminum Boom Pole is designed specifically for ultra-small cameras like the GoPro and the iPhone, the Tadpoles feature a tilting "Ball & Socket" head for precise positioning. The extendable Tadpoles allow the cameras to get closer to the action, up and over crowds, one...
Availability: In Stock
$3000
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE110
Samy's Part #: KTEKKE110

This K-Tek Avalon Series Aluminum Boompole (Uncabled) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.458 lbs (661g). This 5-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ - 16 male thread and the bottom attachment...
Availability: In Stock
$19950
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KBLT52B
Samy's Part #: S-047515

The K-Tek KBLT52B Boom Pole Case (Large) is a three sided case with a semi-hard clam-shell design with zippers and a removable inside pouch. This new boom pole case is made using a three-layer lamination process for extreme strength to weight ratio. The external black fabric is a rip-stop nylon....
Availability: In Stock
$23275
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTZOOMH6XY
Samy's Part #: S-047531

The K-Tek Microphone Windscreen Topper for Zoom H6 XY Capsule is made of high-grade synthetic black short hair fur and it is designed for Zoom H6 handy recorder. Toppers are designed to protect the recorder against the noise by high wind and to produce optimum results. Simply moving a recorder...
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KCAMSSM
Samy's Part #: KTEKKCAMSSM

The K-Tek Camera Shoemounting Shock Mount for Sanken CS-1 is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb vibration...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTZOOM
Samy's Part #: S-011149

The Topper is a custom-tailored windscreen designed to reduce the effects of wind noise on the Zoom H4n audio recorder.
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE79CCR
Samy's Part #: S-031220

The K-Tek KE79CCR Traveler Aluminum Boompole with Internal Coiled XLR Cable (Right Angled) has a collapsed length of 1'8″/51cm and an extended length of 6'7″/201cm and only weighs 1.45lbs/658g. This 6-section Aluminum Traveler Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
$25650
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: Z-FSO-M
Samy's Part #: KTEKZFSOM

The K-Tek Zeppelin Slip-On Windscreen (Medium) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KMT
Samy's Part #: S-024219

The K-Tek K-Mount Microphone Shock Mount Suspension System offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. The tough microphone cage, strong grip on the microphone...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTBAR9
Samy's Part #: S-011234

A 9" machine aluminum standard shoe bar on a Delrin shoe, allows for mounting multiple accessories on a camera shoe.
Availability: In Stock
$2850
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KE110CC
Samy's Part #: KTEKKE110CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.723 lbs ( 781g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″ - 16 male...
Availability: In Stock
$23750
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: K-CAM-SM
Samy's Part #: KTEKKCAMSM

The K-Tek Camera Shoemounting Shock Mount for Shotgun Microphones is the workhorse for ENG crews worldwide which offers stretchable polymer formulated suspenders and vertical angle adjustment, will accommodate mic diameters from 19 to 25mm. A tough design, strong grip on the microphone and superb...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KSPT
Samy's Part #: S-015064

The K-Tek Shoe Plate Mount provides a flat surface for mounting accessories including audio transmitter receivers and recorders to the top of shoe on a camera.
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: K-6NN
Samy's Part #: S-047523

The K-Tek XLR Male to XLR Female Coiled Microphone Cable (6 In. To 4 ft.) is an approximately 6 inches coiled cable that extends to 4 feet and is made for use with boom pole products. It comes with Neutrik XLR male and female connectors.

Features:
  • 6 inches cable extends up to 4 feet
  • For boom
...
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: K-4NK
Samy's Part #: S-047522

The K-Tek XLR Male to Low-Profile Right-Angle XLR Female Coiled Microphone Cable (3-15 In.) is a 3 inches coiled cable that can extend up to 15 inches for use with on-camera mics. It comes with a Neutrik XLR male & K-Tek compact, low-profile angled female connector.

Features:
  • 3 inches cable
...
Availability: In Stock
$3800
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: Z-FSO-L
Samy's Part #: KTEKZFSOL

The K-Tek Zeppelin Slip-On Windscreen (Long) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KMICF
Samy's Part #: S-051473

The K-Tek KMICF Mic Flag (Square, Black) is a square microphone ID flag that fits any handheld, ENG microphone. It is ready to receive adhesive logos and other branding on four surfaces, each 2.5" x 2.5" (6.35cm x 6.35cm). The black Mic Flag comes with two foam inserts for optimized hold on all...
Availability: In Stock
$1425
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KN2285
Samy's Part #: S-011231

Machined aluminum top and bottom mounting plates with 2 carbon fiber, foam covered side handles for easy handling. The side handles have adjustable height using K-Tek's proprietary collar/collet system. The top bar offers nine shoe mounts and multiple 1/4 x 20 and 3/8 x 16 threaded holes. Comes...
Availability: In Stock
$24700
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KBRGS
Samy's Part #: S-011232

A 4" machined aluminum shoe bridge that sits 4" over the camera and can offset accessories to one side. The cold shoe is made of industrial Delrin.
Availability: In Stock
$4560
No tax collected on shipments to states other than California and Nevada
QTY
Notice: This item is non-returnable
MFR Part #: KTBAR
Samy's Part #: S-011233

A 6" machine aluminum standard shoe bar on a Delrin shoe, allows for mounting multiple accessories on a camera shoe.
Availability: In Stock
$2850
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KGPS
Samy's Part #: KTEKKGPS

The K-Tek K-GPS Universal Microphone Suspension Mount is a versatile suspension system featuring K-Teks unique K-SUS polymer suspenders. It is a lightweight shock mount designed to fit a wide range of microphones. Equipped with a swivel mount with standard 3/8-16 thread.

Features:
  • Versatile
...
Availability: In Stock
$14725
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KSSM
Samy's Part #: KTEKKSSM

The K-Tek Short Microphone Shock Mount is the shorter alternative to the KSM. Every bit as much of a workhorse for ENG crews as the larger KSM, the tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSSM. With a machined aluminum frame,...
Availability: In Stock
$12350
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KSUS
Samy's Part #: KTEKKSUS

The K-Tek Polymer Microphone Suspenders for Shockmounts (Pair) is a rugged replacement accessory pair of polymer Microphone suspenders, featuring a 4 point design that provides optimal shock and motion isolation, for use with Shockmounts. The K-SUS Suspenders are spaced 2″ (5cm) equipped with...
Availability: In Stock
$1900
No tax collected on shipments to states other than California and Nevada
QTY
MFR Part #: KTPRFF
Samy's Part #: KTEKKTPRFF

The K-Tek Faux Fur Topper for Handheld Microphones (Black) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing. The system's body of open cell...
Availability: In Stock
$2500
No tax collected on shipments to states other than California and Nevada
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2017 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]