CONTACT US AT 800-321-4726
All Products
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: KSRV2DSJRBH
Samy's Part #: S-021261

The JAG35 Full Shoulder Rig V2 is our top-of-the-line “offset” shoulder rig. The Full Shoulder Rig places the camera directly in front of the shooter’s face, features wide, sturdy handles for smooth operation, plus a comfortable shoulder-pad and counterweight. The dual shoulder-rails allow tons of room...
Availability: In Stock
$49900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KFRV2DSJ6R
Samy's Part #: S-021203

The JAG35 Field Runner Camera Support V2 is a low-cost, light-weight, and highly ergonomic offset shoulder rig for DSLR shooters on a budget or on the go. Shooters who use the camera’s LCD display with or without a viewfinder for monitoring prefer the Field Runner because it places the camera...
Availability: In Stock
$27900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: GLDR
Samy's Part #: S-023336

When you need the simplest rig for your camera, look no further than the Jag35 Glider Camera Rig For Follow Focus Control. With its simple two handle design and sturdy base, the Glider gives you a perfect mount for adding a follow focus or a simple lighting configuration. The Glider was designed...
Availability: In Stock
$19900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RODCN
Samy's Part #: S-019520

The Jag35 Rod Connector 15MM is a steel threaded stud that allows you to connect our Jag35 threaded rods together. It is very simple to use. You simply have to screw it to one rod first then you connect the second rod, and you are ready to go. Due to our new hollow Jag35 Rods, we have now ...
Availability: In Stock
$500
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: DRUNNERB
Samy's Part #: S-030820

Now featuring new DSLR Stand V2 which is now compatible with your Canon 5D Mark III or 6D with a small change that will allow you to use your Canon 5D Mark III and 6D securely. This new design Jag35 D|Runner Bundle features a lock pin hole for your camera. Still made out of aluminum, you can be...
Availability: In Stock
$34900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: HKHDLSV2
Samy's Part #: S-021211

The JAG35 Knurled Handle V2 are the best option when looking to get good grip on your rig. They have been designed to be strong and long lasting, even when used in the toughest environments. We have machined a handle from sturdy and lightweight aluminum giving you a rugged, unbreakable product,...
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KARV2DSJ3H
Samy's Part #: S-021260

The Austin Rig Camera Support V2 by JAG35 is a compact, full-featured, offset shoulder rig that excels for the shooter who uses the rear screen on the camera for monitoring and who operates the follow-focus themselves while shooting. The Austin Rig also features JAG35’s double-offset counter weight...
Availability: In Stock
$42900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RJG12A
Samy's Part #: S-015752
Jag35 Rods are excellent affordable rods that work great with your Shoulder Rig. They conform to the industry standard 15mm system, making our products compatible to any other rods, rail-blocks, or accessories that also use this system.
Availability: In Stock
$3900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RRSBKV2
Samy's Part #: S-021223

The JAG35 Rod Raiser V2 is designed to be used with DSLRs with battery grips or tall bodies like the 1D Mark IV, it helps you mount rods on these types of configurations at the proper industry standard height of 85mm from center of lens to center of rods.
Availability: In Stock
$9999
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: 90CLPV2
Samy's Part #: S-021212

The JAG35 90 Degree Clamp V2 is intended for any time you need to mount any two 15mm rods 90 degrees from each other. There are literally dozens of applications where this is useful, like mounting handles, and other accessories. Made out Aluminum anodized black.
Availability: In Stock
$2400
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: SPADPRO
Samy's Part #: S-021221

The JAG35 Shoulder Pad Pro V2 is now a half inch wider with a sturdier Rail block which includes a swing piece that adjusts the cushioned cheese plate at different angles to conform to each users shoulder, also the Shoulder Pad Pro is no longer the traditional long rectangular shape, the corners...
Availability: In Stock
$14900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: JASRCON
Samy's Part #: S-022538

This Conversion Kit includes exactly what you need to convert your current rig into a Street Runner v2.

The Street Runner Conversion Kit is the perfect solution for anyone desiring a lightweight, on the go support rig. It gives you the ability to Convert any of your existing Jag35 DSLR Kits into
...
Availability: In Stock
$7900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
Notice: This item is non-returnable
MFR Part #: RJG6A
Samy's Part #: S-015755

The Jag35 rods are made out of solid aluminum. Jag35 looked at many different rods and try to find one that’s affordable and well made and couldn’t really find one that was both, so we decided to start machining our own. These are solid aluminum and anodized black. They are great and most...
Availability: In Stock
$3499
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: CAEXHDL
Samy's Part #: S-015849

The Extended Handles are designed to be used on any shoulder rig that uses 15mm Rod system. The Extended Handles are more ergonomically placed, since they are lower on the rig allowing the user to carry more weight for longer periods of time without much fatigue. Unlike standard handles, the...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: KSTRV2DSJ6TPS
Samy's Part #: S-021205

The JAG35 DSLR Baseplate V2 is a small and compact way to mount your Follow Focus and Mattebox to your DSLR Camera. Now you can configure your DSLR Baseplate to your specific needs with the additional options available.

Rod Size
We offer a variety of rod sizes to fit the needs of our customers....
Availability: In Stock
$12900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: QRGSV2
Samy's Part #: S-021207

The JAG35 Quick Release Gorilla Stand V2 is designed to allow customers who use the Zacuto Gorilla plate to quickly and easily mount and unmount their cameras. The Gorilla stand is made from sturdy and lightweight aluminum and anodized to give it the shiniest finish, with the most even, longest...
Availability: In Stock
$7900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: HTPHV2
Samy's Part #: S-021210

The JAG35 Top Handle V2 is a simple solution for adding a handle anywhere on your rig.  The Top Handle is compatible with any rods and rigs that use the industry standard 15mm rod system, making it easy to get those low shots or to get a better grip on your camera rig. Many changes have come to...
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: HBTHPHV2
Samy's Part #: S-021213

The JAG35 Balanced Top Handle V2 is designed to give you more adjustment allowing the user to achieve a better balanced rig. It consist of a 8″rod with a rod clamp at the end and a regular height adjustable handle on the other end. Made in the USA using black Anodized Aluminum parts.
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: ROSRBV2
Samy's Part #: S-021218

The JAG35 Offset Straight Rail Block V2 is essential while building a shoulder rig in which you need to place the DSLR body with a Battery Grip right in front of your face.
Availability: In Stock
$4900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: QRSRACLP
Samy's Part #: S-021222

The JAG35 Quick Release Single Railblock V2 is a durable aluminum Railblock that gives you the ability to quickly and easily mount any 1/4-20 accessory to any single 15mm rod. Due to its built in quick-release mechanism, you no longer have to detach accessories from your kit. In a literal snap,...
Availability: In Stock
$2900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
MFR Part #: RJG15V2
Samy's Part #: S-021228

JAG35 is always looking to improve our products, we are constantly learning and improving our designs to better suit our customers. So JAG35 is proud to introduce its new re-designed JAG35 Hollow Rod V2 (15 inch). Similar to our previous rods, the version 2 rods still conform to the industry s...
Availability: In Stock
$5900
No tax collected on shipments to states other than California, Nevada, and Maryland
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]