CONTACT US AT 800-321-4726
All Products
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Avenger
MFR Part #: D600
Samy's Part #: AVEND600

Boom arms provide an unobstrusive method of positioning lighting fixtures and reflectors above a subject. Supports 66 lbs at the minimum extension of 46 in. Supports 15.4 lbs at the maximum extension of 83 in.
  • Steel Construction
  • 83" Maximum Extension
  • Rubber Handle
  • Counterweight Hook
  • 5/8"
...
Availability: In Stock
Order by 1:00pm PST to ship today
$12488
QTY
Avenger
MFR Part #: A5033
Samy's Part #: S-003094

A smooth running studio performer, with low profile base that slips easily into position on the set. The base folds for easy storage or transport. Supplied with free-running wheels and positive brakes.


FEATURES:
  • Universal Top 5/8 inch ("baby")
Availability: More In Transit
$21988
QTY
Avenger
MFR Part #: A4041B
Samy's Part #: S-001436
Extend the second riser of this Baby-Combi-Boom Stand to its maximum, press a lever, and you have a stand with a two section boom arm. When used as a boom stand, its maximum load is 11 lbs -- strong enough for a small light fixture with a small softbox or umbrella.
Availability: Special Order
Avenger
MFR Part #: C4461
Samy's Part #: S-040059

The 
Avenger MP Coupler with 1 1/8" (28mm) Spigot is perfect for using with pipes or trusses. Made from aluminum alloy, it can be tightened with a wingnut and has a 28mm spigot for mounting lights and other accessories. It can support a payload up to 500kg and works on pipes ranging from 42mm to...
Availability: In Stock
$3088
QTY
Avenger
MFR Part #: F809
Samy's Part #: AVENF809

Unique to the Avenger line, this baby plate allows fixtures to be fine-tuned with the built in swiveling baby pin.
Availability: In Stock
$1995
QTY
Avenger
MFR Part #: D600CB
Samy's Part #: AVEND600CB

Mini boom black chromed. Min extension 117cm-Max load 30kg. Max extension 212cm-Max load 7kg. 16mm female stand attachment.
  • Black Chrome-plated Steel Construction
  • 83" Maximum Extension
  • Rubber Handle
  • Counterweight Hook
  • 5/8" Stud and Receiver
Availability: In Stock
Order by 1:00pm PST to ship today
$12488
QTY
Avenger
MFR Part #: F805
Samy's Part #: AVENF805

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: Special Order
Avenger
MFR Part #: A2033F
Samy's Part #: S-003085

This Avenger A2033F Century C Stand is a favorite among professional photographers, film makers and videographers everywhere. It is durable, and designed to collapse flat for easy transport and storage. It rises to a maximum height of 10.75' (3.25 m). The leg design of Century Stands provides...
Availability: Special Order
$15188
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: C4462
Samy's Part #: S-052345

The Avenger MP Coupler with 5/8" (16 mm) Spigot is a regular clamp to use on pipes or trusses. Made from aluminum alloy, it can be tightened with a wing nut and has a 16mm spigot for mounting lights and other accessories. It can support a payload up to 500kg and works on pipes ranging from 42mm...
Availability: In Stock
Order by 1:00pm PST to ship today
$2795
QTY
Avenger
MFR Part #: A2016DCB
Samy's Part #: S-002032

This is an Black Steel Base Century Stand. It has a detatchable "turtle" base that is easily removed for easy storage and transport. It has a 20" main riser and its maximum height is 4.5' (1.4 m).The innovative design on the Century Stand base allows individual legs to be set at any angle, and...
Availability: Special Order
$15988
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: A0017
Samy's Part #: S-052327

This Avenger Baby Stand 17 with Leveling Leg (Chrome-plated, 5.75 ft.) features steel legs and aluminum risers and is available in silver only. The stand has 3 sections and 2 risers, can support a maximum payload of 4kg and can reach a maximum height of 1.75m. It has 1 leveling leg so you can...
Availability: In Stock
$17488
QTY
Avenger
MFR Part #: D700B
Samy's Part #: AVEND700B

Positions and holds reflector for hands free use.
Availability: Special Order
Avenger
MFR Part #: C295
Samy's Part #: AVENC295

Stage clamp supplied with 28mm stud.
Availability: Special Order
$2395
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: A5012
Samy's Part #: S-002103

The Avenger Roller Stand 12 with Folding Base (Chrome-plated/Black, 3.9 ft.)
 is a heavy duty, chrome-plated steel support that features a low base for extra stability, braking wheels, two risers and both a female 1/1/8" Junior receiver and a 5/8" Baby retractable stud. The legs fold up for transport...
Availability: In Stock
Order by 1:00pm PST to ship today
$22099
QTY
Avenger
MFR Part #: F830TH
Samy's Part #: AVENF830TH

This Avenger F830 Junior to Baby Swivel Pin adds articulation to your stand or boom. One end slips onto a male 5/8 in. pin while the other supports a light or accessory with a 5/8 in. receiver. The ball joint allows 180° swivel of the fixture, while the large handle provides secure locking in...
Availability: In Stock
$5988
QTY
Notice: This item is non-returnable
Avenger
MFR Part #: H2008
Samy's Part #: S-029274

The 
Avenger H2008 8 x 8 ft. Modular Fold Away Frame is a unique overhead frame that allows setup and breakdown in seconds. Precisely engineered, the hinged connection points easily fold to transport the frame from set to set or through doorways without having to remove the fabric.
Availability: Special Order
$56488
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: A3043CS
Samy's Part #: S-003090

The Avenger A3043CS Roller Overhead Stand - 14.2 ft. (4.3 m) Chrome steel stand complete with braked wheels. 4 sections, 3 risers. Ø: 45, 40, 35, 30mm. Leg: 25x25mm.

Features:
  • Made for Overheads - Supports 400 square feet of butterfly material
  • Wide Base - Sure-footed stability at maximum heights
...
Availability: In Stock
$40988
QTY
Notice: This item is non-returnable
Avenger
MFR Part #: A5017
Samy's Part #: AVENA660

The Avenger 
Roller Stand 17 with Folding Base (Chrome-plated, 5.6 ft.) with 3 sections and 2 risers, features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and can reach a maximum height of 1.70m. It features wheels for easy transportation and its legs fold...
Availability: Special Order
Avenger
MFR Part #: A5029
Samy's Part #: S-003092

This 9 ft 10 in double riser light stand features a low profile base that slips easily into position on set. It is supplied with wheels and positive brakes.
Availability: In Stock
Order by 1:00pm PST to ship today
$25988
QTY
Avenger
MFR Part #: F830
Samy's Part #: AVENF830

This Avenger F830 Junior to Baby Swivel Pin adds articulation to your stand or boom. One end slips onto a male 5/8 in. pin while the other supports a light or accessory with a 5/8 in. receiver. The ball joint allows 180° swivel of the fixture, while the large handle provides secure locking in...
Availability: In Stock
Order by 1:00pm PST to ship today
$3988
QTY
Avenger
MFR Part #: D520LB
Samy's Part #: AVEND520B

This 40" C-Stand Extension Arm is capable of holding light heads, flags, reflectors, or a gobo.
Availability: Special Order
$4488
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: D310
Samy's Part #: AVEND310

Flex arm for precise positioning, lift, and reach.
Availability: In Stock
$1395
QTY
Notice: This item is non-returnable
Avenger
MFR Part #: A0025B
Samy's Part #: S-015679

The Avenger A0025B Baby Alu 25 Stand is a versatile, lightweight aluminum stand. It is quick to set up, and very stable. Its locking T-knobs are large and ergonomic -- making it easy for you to efficiently lock each section. This stand rises to a maximum height of 8.2' (2.5 m).
Availability: In Stock
$19988
QTY
Avenger
MFR Part #: D244N
Samy's Part #: S-052346

The Manfrotto Variable Friction Arm is fitted with large knob to lock all 3 movements. The Arm is a fully articulated accessory with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360° using a rubberized T-handle. The handle is used to control tension via partial loosening for...
Availability: In Stock
Order by 1:00pm PST to ship today
$9999
QTY
Avenger
MFR Part #: D200B
Samy's Part #: AVEND200B

Avenger's most popular grip accessory. The Avenger D200 2.5" Grip Head (Black) has hundreds of functions. Unlike any other grip head, the D200 utilises a series of washers for extra locking torque and the use of automotive-quality brake pad discs for extra security.
Availability: In Stock
Order by 1:00pm PST to ship today
$3469
QTY
Avenger
MFR Part #: A4050CS
Samy's Part #: S-052334

The Avenger Steel Boom Stand 50 (Chrome-plated, 16.4 ft.) is a chrome steel stand with 4 sections and 3 risers. It can support a maximum payload of 30kg and can reach a maximum height of 5m. It also features 1 levelling leg for use on uneven surfaces. It is compatible with A9000N braked wheels...
Availability: In Stock
Order by 1:00pm PST to ship today
$38988
QTY
Avenger
MFR Part #: A2018FCB
Samy's Part #: S-002031

The Avenger Century stand is unlike any other. Fitted with captive handles that do not vibrate free; utilizing a new lightweight steel making them up to 1kg lighter but just as strong; triple chrome plating resistant to corrosion.

Made of Black Chrome with 3 Risers, 2 telescopic extensions and

...
Availability: Special Order
$11956
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: A5034
Samy's Part #: S-015641

The Avenger A5034 Folding Base Roller Photographic Light Stand 34 has legs and column in steel, risers in aluminium, complete with wheels. 5 sections, 4 risers. Ø: 45, 40, 35, 30mm. Leg: 20x40mm.

Features:

  • Leveling Leg - One leg section extends to stabilize the load on uneven terrain
...
Availability: Special Order
$29488
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: C1000
Samy's Part #: AVENC1000

The Avenger C1000 Drop-Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" (Baby) stud.
Availability: In Stock
Order by 1:00pm PST to ship today
$899
QTY
Avenger
MFR Part #: F300
Samy's Part #: AVENF300

A wall plate with a junior receiver to mount larger fixtures.
Availability: Special Order
$2488
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: B7034FF
Samy's Part #: S-052339

The Avenger Long John Silver Jr. FF Stand with Braked Wheels (Steel, 11 ft.) is the world's lowest stand, with the highest payload. The wincher driven hoisting system enables you to extend up to 3.38m and support up to 120kg. An extremely compact and sturdy stand that makes it easy to load and...
Availability: Special Order
Avenger
MFR Part #: B6040X
Samy's Part #: S-039036

The Avenger Super Wind-up 40 Stand with Braked Wheels (12.6 ft.) is a heavy lift stand with strengthened stainless steel column and legs, chrome steel risers and geared column. 3 section, 2 risers which extended simultaneously at 4.4cm per handle turn. Safety cable ensures simultaneous retrieval...
Availability: Special Order
Avenger
MFR Part #: D500L
Samy's Part #: AVEND500

20" C-Stand Extension Arm provides an extended grip point for scrims and flags.
Availability: Special Order
$3988
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: A2009CB
Samy's Part #: S-020934

The Avenger Turtle Base for Century C Stand offers the most features allowing you to use the base separately as a backlight stand of flexibility of using various sized columns to meet your needs. It is made of black painted chrome plated steel and is suitable to fit Avenger column risers of various...
Availability: Special Order
$9388
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: F800
Samy's Part #: AVENF800

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: Special Order
Avenger
MFR Part #: E600
Samy's Part #: AVENE600

The Avenger E600 Aluminum Snap-In Pin has a hexoganal end that snaps into a Super Clamp; the other end will accept a lighting fixture that has a 5/8" female receptor.
Availability: Special Order
$636
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]