CONTACT US AT 800-321-4726
All Products
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: 9KT001
Samy's Part #: S-050044

The 9.Solutions Handlebar Kit for Small Cameras is the perfect combo to quickly and securely to mount GoPro cameras onto handlebars and/or roll bars. The kit includes a handlebar mount that utilizes the Quick Mount Receiver interface. For attaching your camera, a 1/4"-20 Quick Mount is included....
MFR Part #: 9XA1017
Samy's Part #: S-050041

The 9.Solutions Action Camera L-bracket makes a great companion to GoPro cameras. It can be used in a variety of different configurations to accommodate 90 degree positioning. An included 1/4"-20 thumb screws allows for attachment to any 1/4"-20 female threaded equipment. The 9.Solutions thumb...
MFR Part #: 9CPA1
Samy's Part #: S-049509

The 9.Solutions C-Pan Arm Camera Guide is a very unique camera guide contraption that mechanically can move a camera in a variety of different paths; straight pan, outward curve, inward curve, horizontally, vertically or at a sloped angle or even forward or backward moves.

The camera is always...
MFR Part #: 9XV1014
Samy's Part #: S-049560

The 9.Solutions VESA to 5/8 In. Receptacle allows small to medium sized VESA compatible monitors to be mounted on standard grip equipment via its 5/8" receptacle or 1/4"-20 and 3/8"-16 female threaded tap-ins. It has two 5/8" receptacles allowing you to mount monitors from below on stands or from...
MFR Part #: 9.VB5080
Samy's Part #: S-049525

The 9.SOLUTIONS Barracuda Clamp is the real super clamp that delivers more versatility and innovation than any other clamp on the market. Whether round, square, or flat, the Barracuda Clamp will open wider and bite with more force than the competition. Its unique mouth design allows it to clamp...
MFR Part #: 9VB5101H
Samy's Part #: S-049540

The 9.Solutions 3.5 In. Baby Pin Set allows for multiple uses for mounting with grip heads, grip arms and the versatile 9.Solutions Python Clamp Mini.
MFR Part #: 9.VB5102
Samy's Part #: S-050058

The 9.Solutions Phone Grip is a versatile tool that allows users to securely mount their smartphones to accommodate a variety of use scenarios. Featuring multiple 1/4" and 3/8" attachment points, the Phone Grip is designed to be used with a wide range of photo and video equipment. This spring-loaded...
MFR Part #: 9.VD5089L
Samy's Part #: S-049527

The 9.SOLUTIONS Double Joint Arm (Long, 660mm) Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8 In. pin with a 3/8 In.-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety...
MFR Part #: 9VD5089M
Samy's Part #: S-049528

The 9.Solutions Double Joint Arm (Medium, 460mm) is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant knee-locking mechanism that makes it possible...
MFR Part #: 9VD5089S
Samy's Part #: S-049529

The 9.Solutions Double Joint Arm (Short, 360mm) has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of e...
MFR Part #: 9XV1024
Samy's Part #: S-049562

The 9.Solutions VESA mount Large to 5/8" Receptacle allows small, medium, and large VESA compatible monitors to be mounted on standard grip equipment via its 5/8" receptacle or 1/4"-20 and 3/8"-16 female threaded tap-ins. It has two 5/8" receptacles allowing you to mount monitors from below or...
MFR Part #: 9XV1025
Samy's Part #: S-049563

The 9.Solutions VESA mount Replacement Plate to 5/8" Receptacle can replace the standard plate with this Large VESA Mount Replacement Plate. The Large VESA Mount Replacement Plate will accommodate monitors with the mounting patterns: 75×75, 100×100, 100×200, and 200x200mm.

Note: The Large VESA...
MFR Part #: 9XA10071
Samy's Part #: S-050054

The 9.Solutions Quick Mount Receiver to Handle Bar is made to fit on bicycle/motorcycle handlebars and roll bars. It's perfect for securely mounting action cameras or any piece of equipment outfitted with a Quick Mount. The Quick Mount Receiver to Handle Bar fastens via allen screws. Use your...
MFR Part #: 9VB5098
Samy's Part #: S-049539

The 9.Solutions Tilt Adapter is an articulating lilnk featuring a friction locking disc securely and accurately set the angle between it's built in 5/8" pin and it's corresponding 5/8" receptacle via the included ergonomic handle. This allows the user to quickly and reliably change the position...
MFR Part #: 9VD5089XS
Samy's Part #: S-049531

The 9.Solutions Double Joint Arm (Tiny, 260mm) has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of eq...
Availability: In Stock
$7499
QTY
MFR Part #: 9.VP5081G
Samy's Part #: S-049550

The 9.Solutions Python Clamp With 35mm Tube Mount consists of a 35mm tube clamp mounted atop a Python Clamp. This clamp is intended for use 9.Solutions EX-SUS POLE but is compatible with any 35mm tubing. Use additional Python Clamp with 35mm Tube Mounts for added stability. The Python Clamp can...
MFR Part #: 9.XG1029
Samy's Part #: S-050057

The 9.Solutions Gooseneck is a versatile flex arm made for use with the 9.Solutions Quick Mount System. It is covered with a silicon sleeve which protects it from the elements and makes it easy to clean. Each end of the Gooseneck is fitted with male and female Magnetic Quick Mount connectors...
MFR Part #: 9XS1006
Samy's Part #: S-049552

The 9.Solutions Savior Clamp Mini is the miniature version of its big brother the Savior Clamp. It has two uniquely shaped jaws that clamp firmly onto any shape: round, square, or flat. The clamp's jaws always have multiple points of contact thus creating more grip than the competitor. The Savior...
MFR Part #: 9VBROD9
Samy's Part #: S-049523

The 9.Solutions 5/8 In. Rod Set (1000mm) consists of two 5/8" (16mm) diameter rods made from high grade aluminum. The rods have 3/8"-16 female threads on each end. Increase the rod's length by connecting additional rods with 9.Solutions 5/8" Rod Connectors. Additionally, 9.Solutions 3/8" Rods...
MFR Part #: 9VE5091
Samy's Part #: S-049535

The 9.Solutions EX-SUS Extension Suspension Pole is a telescoping pole used to mount lights, cameras, and other equipment from a grid, pipe, or mounting point on the ceiling. The telescoping design allows the height of your equipment to be adjusted quickly and easily while also freeing-up valuable...
MFR Part #: 9XM1010
Samy's Part #: S-050052

The 9.Solutions Quick Mount Receiver to 3/8 in. Rod is used to offset a Quick Mount Receiver. This can be especially useful when needing to position small cameras in small spaces. The unit is fitted with two Quick Mount Receivers, positioned at a 90 degree angle from one another.

Features:
...
MFR Part #: 9VD5095
Samy's Part #: S-049526

The 9.Solutions Double El-Bo Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any...
MFR Part #: 9.VB5109
Samy's Part #: S-049542

The Heavy Duty T-Handle can replace the standard tightening handle on the 9.Solutions Savior Clamp or any full sized Python Clamp.

The ergonomic design of the handle provides increased surface area for a sturdier grip and easier torque. The hard anodized aluminum surface increases its durability

...
MFR Part #: 9.VP5081A
Samy's Part #: S-049546

There is more to the Python Clamp than meets the eye. The 9.Solutions Python Clamp with 5/8 Pin can be adapted for use with many different accessories used in photo, video, stage, and visual merchandising. It can be used in a combination with a grip head, where by replacing the grip head's two...
MFR Part #: 9VE5085
Samy's Part #: S-049532

The 9.Solutions El-Bo Arm is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant locking-mechanism that makes it possible to operate with one hand....
MFR Part #: 9VB5087A
Samy's Part #: S-049534

The 9.Solutions EL-BO Arm Angled Mini is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant locking-mechanism that makes it possible to operate with...
MFR Part #: 9VBROD5
Samy's Part #: S-049519

The 9.Solutions 5/8 In. Rod Set (150mm) consists of two 5/8" (16mm) diameter rods made from high grade aluminum. The rods have 3/8"-16 female threads on each end. Increase the rod's length by connecting additional rods with 9.Solutions 5/8" Rod Connectors. Additionally, 9.Solutions 3/8" Rods can...
MFR Part #: 9XS1005
Samy's Part #: S-049551

The 9.Solutions Savior Clamp has unique, articulating jaws that can fit firmly onto any oddly shaped object. Whether mounting on round, square, or flat objects, the peak-and-valley design of the jaw allows for multiple points of contact, ensuring a strong grip every time. The Savior Clamp is tapped...
MFR Part #: 9KT002
Samy's Part #: S-050045

The 9.Solutions Handlebar Kit for Small Cameras is the perfect combo to quickly and securely to mount small cameras onto handlebars and/or roll bars. The kit includes a handlebar mount that utilizes the Quick Mount Receiver interface. For attaching your camera, a 1/4"-20 Quick Mount is included....
MFR Part #: 9VBROD4
Samy's Part #: S-049510

The 9.Solutions Mini Rigging Rod Set Nuts has 2x long nuts and 6x finger nuts, long nuts are used to fasten the systems 3/8"-16 rods together and finger nuts are used to tighten the bases for gears.

Features:
  • Long nuts fastens the systems 3/8"-16 rods together
  • Finger nuts tightens the bases
...
MFR Part #: 9XR1011
Samy's Part #: S-049511

The 9.Solutions 3/8 In. Gag allows two 3/8" (10mm) rods to be joined and positioned anywhere in 360 degrees. One 3/8" pass-thru receptacle is open so you can attach the 3/8" Gag at any point along a rod. The 3/8" Gag works perfectly for adding reinforcement components to a rig.

Features:
  • Weight:
...
MFR Part #: 9.VBROD1
Samy's Part #: S-049512

The 9.SOLUTIONS 3/8 In. Rod Set (150mm) set consists of different length rods, connecting long nuts and finger nuts. The rods which is made of a high grade aluminum are all threaded with 3/8 In. threads which makes possible to connect with most other grip equipment.

Features:
  • Made with High
...
MFR Part #: 9.VBROD2
Samy's Part #: S-049513

The 9.Solutions 3/8 In. Rod Set (250mm) consists of two 3/8" (16mm) diameter rods made from high grade aluminum. The rods have 3/8"-16 female threads on each end. Increase the rod's length by connecting additional rods with 9.Solutions 5/8" Rod Connectors. Additionally, 9.Solutions 3/8" Rods can...
MFR Part #: 9VBROD3
Samy's Part #: S-049514

The 9.Solutions 3/8 In. Rod Set (500mm) consists of two 3/8" (16mm) diameter rods made from high grade aluminum. The rods have 3/8"-16 female threads on each end. Increase the rod's length by connecting additional rods with 9.Solutions 5/8" Rod Connectors. Additionally, 9.Solutions 3/8" Rods can...
MFR Part #: 9ST5096
Samy's Part #: S-049515

The 9.Solutions 5/8 In. Gag Open allows for two 5/8" (16mm) rods to be joined and positioned anywhere in 360 degrees. One 5/8" (16mm) pass-thru receptacle is open so that you can attach it at any point along a 5/8" (16mm) rod. The 5/8" Gag Open works perfectly for adding reinforcement components...
MFR Part #: 9.VG5096A
Samy's Part #: S-049516

The 9.Solutions 5/8 In. Gag Closed allows one 5/8" (16mm) rod to be joined and positioned anywhere in 360 degrees with either a 5/8" (16mm) rod or a 3/8" (10mm) rod. The 5/8" Gag Closed works perfectly for adding reinforcement components to a rigging structure. The option to convert from 5/8"...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]