Newsletter Icon
Rewards Program
Ebay Icon
Used Equipment
Leasing
CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
DJI
MFR Part #: CP.RN.00000033.01
Samy's Part #: S-061073

Whereas the standard
DJI Ronin-S comes with a focus wheel, control cables, a power adapter, and other accessories, the DJI Ronin-S Essentials Kit includes the gimbal and the key accessories required to go out and begin shooting. There's a difference of only several accessories, accompanied by...
Availability: On Backorder
DJI
MFR Part #: CP.MA.00000037.01
Samy's Part #: S-058699


The DJI Mavic 2 Fly More Kit includes two Intelligent Flight Batteries, a Mavic 2 Car Charger, a Battery Charging Hub, a Battery to Power Bank Adapter, Low-Noise Propellers, and a Mavic 2 Shoulder Bag, providing you with comprehensive support during shooting.

Both Intelligent Flight Batteries

...
Availability: In Stock
DJI
MFR Part #: CP.RN.00000020.01
Samy's Part #: S-060871

The DJI Ronin-S Multi-Camera Control Cable (Sony Multi Port)
allows you to connect your Sony camera to the Ronin-S camera control port to let you control the camera via the Ronin-S camera control button.
Availability: On Backorder
DJI
MFR Part #: CP.MA.00000038.01
Samy's Part #: S-058700

Replace your dead batteries or stock up for long shoots with the DJI Intelligent Flight Battery for Mavic 2
. This battery has a 3850mAh and 59.29Wh capacity that delivers enough power for up to 31 minutes of flight time. Built into the battery is DJI's Intelligent Battery Management System. This...
Availability: In Stock
DJI
MFR Part #: CP.ZM.000140
Samy's Part #: S-034798

The DJI Ronin Cable Pack (Part 33) features an assortment of cables used to connect various components that go with the

DJI Ronin Gimbal Stabilizer.

$4900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
DJI
MFR Part #: CPPT0000002021
Samy's Part #: S-056956

Specially made for the Mavic Air. This set includes ND4, ND8 and ND16 filters. ND filters reduce the amount of light coming into the sensor, giving you the freedom to create your work by allowing more control of the camera's aperture, exposure time and sensor sensitivity settings. Put more simply;
...
Availability: In Stock
DJI
MFR Part #: CP.ZM.000159
Samy's Part #: S-045244

The DJI Wireless Thumb Controller for Ronin is simple to setup and use, the DJI Ronin Wireless Thumb Controller (Including an additional external receiver) makes controlling your Ronin easier and more intuitive, even with only a single operator. Capture shots that are difficult or impossible now,...
Availability: In Stock
QTY
Notice: This item is non-returnable
DJI
MFR Part #: CP.QT.000069
Samy's Part #: S-044141

The DJI Gear Backpack by Manfrotto (Medium) is a compact, functional and ergonomically designed backpack that holds the Osmo and its accessories. It can also accommodate DSLR cameras with large, fast zoom lenses (ex. 70-200mm f/2.8) attached. It can fit two additional lenses, for example a 16-35mm...
Availability: In Stock
DJI
MFR Part #: CP.PT.000672
Samy's Part #: S-054694

The DJI Goggles FPV Headset is comfortable goggles designed for seamless FPV flying with DJI products. They combine a pair of large ultra-high quality screens, long-range, low lag wireless connectivity, and direct control of photo and video capture. With Intelligent Flight Modes like ActiveTrack,...
Availability: On Backorder
DJI
MFR Part #: CP.BX.000222
Samy's Part #: S-053143

Created for outdoor aerial imaging, the DJI CrystalSky High-Brightness Monitor (5.5 In.) features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control. A maximum 2000...
DJI
MFR Part #: CPMA00000056.01
Samy's Part #: S-058702

The
DJI Battery Charging Hub for Mavic 2 Intelligent Flight Batteries can recharge up to four batteries. Plug in your Mavic 2's AC adapter or car charger and you'll be ready, with all four batteries done charging in around 3.5 hours. Batteries are charged sequentially in order of most to least...
Availability: In Stock
DJI
MFR Part #: CP.BX.000062
Samy's Part #: S-041553

The DJI Quick Release Rotor Adapters for 1345s Quick-Release Props (Pair) are used with 1345s Quick-Release Props. Patented rotor lock mechanism ensures reliable locking and tool-free mounting and release at the same time. The adapters screw onto the motor, where they permanently reside. A pair...
Availability: In Stock
DJI
MFR Part #: CP.ZM.000350
Samy's Part #: S-045989

The ergonomic design of DJI Universal Remote Controller Lanyard eases the pressure to the cervical vertebra. It is useful to off-load the weight of the remote controller when flying for long periods of time so that you can focus on enjoying the flight.
Availability: In Stock
QTY
Notice: This item is non-returnable
DJI
MFR Part #: CP.BX.000202
Samy's Part #: S-050210

The DJI TB50 Intelligent Flight Battery for Inspire 2 Drone / Ronin 2 uses higher performance and a higher density battery cell with an overall larger capacity as well as an updated management unit. Its performance in low temperature environments has been optimized with a built-in 70W self-heating system
...
Availability: In Stock
DJI
MFR Part #: CP.BX.000178
Samy's Part #: S-051092

The latest update to DJI Lightbridge technology has an effective transmission distance of up to 4.6mi (7km) and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera op. This DJI Remote Controller for Inspire 2 Drone is designed for use with your Inspire 2 drone. Users...
DJI
MFR Part #: CP.BX.000178
Samy's Part #: S-054986

The DJI Remote Controller for Inspire 2 Drone features latest update to DJI Lightbridge technology has an effective transmission distance of up to 4.6mi (7km) and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera op. Users can also switch between 2.4GHz and 5.8GHz control...
Availability: In Stock
QTY
Notice: This item is non-returnable
DJI
MFR Part #: CP.ZM.000378
Samy's Part #: S-049565

A High Capacity Osmo Intelligent Battery reaches 1225mAh (14.1Wh) and 11.55V. Use a DJI charger to recharge intelligent batteries
Availability: On Backorder
DJI
MFR Part #: CP.BX.000177
Samy's Part #: S-051091

The DJI CINESSD Station for Inspire 2 Drones is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 drone, insert it into the CINESSD Station, then connect the station to a computer via the included USB 3.0 cable. Once...
DJI
MFR Part #: CP.ZM.000136
Samy's Part #: S-034797

The DJI Dovetail Mounting Plate B for Ronin (with universal groove and camera screws) is a sliding plate required when mounting certain cameras to the gimbal.

$10000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
DJI
MFR Part #: CP.PT.000563
Samy's Part #: S-048405

The DJI Mavic Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from...
Availability: On Backorder
DJI
MFR Part #: CP.ZM.00000083.01
Samy's Part #: S-055767

The DJI Osmo Mobile 2 Part 1 Base is used to fix the Osmo on tables or other level surfaces so that it remains stable without tipping over.
Availability: On Backorder
DJI
MFR Part #: CP.ZM.000301
Samy's Part #: S-046865

The DJI Ronin Series Battery Power Distributor is designed for the Ronin series hand-held gimbals, this Battery Power Distributor has a P-Tap power connector that can supply power to the gimbal and other onboard devices (such as a RED camera). The power connector is easy to connect and remove....
DJI
MFR Part #: CP.PT.000562
Samy's Part #: S-048404

The DJI Mavic Car Charger is used to charge the Intelligent Flight Battery through a car's cigarette lighter port. It comes with low-voltage protection to ensure enough starting battery voltage for the car. Overheating protection will automatically cut off charging if your cigarette lighter port...
Availability: In Stock
DJI
MFR Part #: CP.ZM.000374
Samy's Part #: S-049567

The DJI Grip for Ronin-M Ronin-MX is a dual handgrip, used to hold a Ronin-M or Ronin-MX more easily and lean it against vertical surfaces when not in use. The grip is also useful for different carrying styles and passing the Ronin between camera operators. It could be personalized with Expansion...
Availability: In Stock
DJI
MFR Part #: CP.PT.000787
Samy's Part #: S-052175

The DJI Prop Guard will protect the propeller blades of your Spark drone in the event of crash or collision. The Prop Guard is designed only for the DJI Spark drone.
Availability: In Stock
DJI
MFR Part #: CP.BX.000012
Samy's Part #: S-038304

The DJI Power Cord for Inspire 1 180W Rapid Charger features a North American-style three-prong grounded connector.
Availability: In Stock
QTY
Notice: This item is non-returnable
DJI
MFR Part #: CP.MA.00000039.01
Samy's Part #: S-058701

The
DJI Battery Charger for Mavic 2 can recharge both the battery for the Mavic Air and the remote controller via the main output. A secondary USB output is available for charging your mobile device or smartphone. This replacement charger does not include an AC cable, and requires one for connecting...
Availability: In Stock
DJI
MFR Part #: CP.PT.000377
Samy's Part #: S-046873

The DJI Car Charger for Phantom 4 Drone is used to charge the Intelligent Flight Battery or remote controller through a car's cigarette lighter port. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low...
DJI
MFR Part #: CP.ZM.000370
Samy's Part #: S-045866

The DJI Osmo Intelligent Battery is designed specifically for the Osmo, the Intelligent Battery provides pack of 980mAh of power with intelligent battery-saving features. Recharge using the Osmo Intelligent Battery Charger.

Features:
  • A high-performance intelligent flight battery
  • Specifically
...
Availability: In Stock
DJI
MFR Part #: CPMA00000059.01
Samy's Part #: S-058719

These next-generation propellers adopt a brand new aerodynamic design, which results in quieter flight, increased efficiency, and extended flight time.
Availability: In Stock
DJI
MFR Part #: CP.ZM.000384
Samy's Part #: S-045242

The DJI Remote Start/Stop is designed to be used with a Ronin series gimbal or DJI Focus to control the camera for video recording or taking photos. When using the Remote Start/Stop with the Ronin-MX and Matrice 600, press the Shutter button or the Video Recording button to take photos or record...
Availability: In Stock
DJI
MFR Part #: CP.ZM.000174
Samy's Part #: S-043106

Simple to setup and use, the DJI Wireless Thumb Controller for Ronin-M & Ronin-MX makes controlling your Ronin-M/Ronin-MX easier and more intuitive, even with only a single operator. Capture shots that are difficult or impossible now, and start using your gimbal to its full potential.

FEATURES:

...
DJI
MFR Part #: CP.BX.000088
Samy's Part #: S-041470

The DJI MFT 15mm f/1.7 ASPH Prime Lens for the Micro Four Thirds Zenmuse X5 Series camera and gimbal systems allows you to capture incredible aerial images and video. This lens is comprised of 9 elements in 7 groups uses 3 aspherical lenses, for maximum sharpness, while maintaining a compact size....
DJI
MFR Part #: SRW60G
Samy's Part #: S-046262

The DJI SRW-60G for Short-Range Video Transmission is a short range wireless video link, which can transmit real time HD video or images for up to 10 meters. Containing both a transmitter and a receiver, it is not only suited for the Ronin-MX and Matrice 600, but can also be used with the Ronin...
DJI
MFR Part #: CP.BX.0000021
Samy's Part #: S-054990

The DJI Inspire 2 180 W Battery Charger (Without AC Cable) charges the Inspire 2 remote controller and battery using AC power. It takes approximately 1.5 hours to fully charge an Inspire 2 Intelligent Flight Battery or 2.5 hours to charge an Inspire 2 remote controller. When charging both devices...
Availability: In Stock
DJI
MFR Part #: CP.ZM.000308
Samy's Part #: S-044139

The DJI Gimbal Cover for Osmo & Inspire 1 Series is specifically designed for the Osmo and Inspire 1. The Gimbal Cover helps protect the junctions between the Zenmuse X3 camera and the Osmo handle or the Inspire 1 aircraft.
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]