The smart way to trigger your camera using light, sound and motion! The Quantum Instruments Triggersmart Kit which contains the UK15 Control Unit and is the heart of the system. It connects to all sensors and cameras, allows fine tuning of trigger delay, sensitivity and shooting sequence. It can be battery or AC powered. Contains the MCT-1 Controller, IR/LIS Receiver, IR Transmitter & Sound Sensor, two Mini Tripods, two control cables, one trigger cable and 2 degree baffle.
- Three-way Camera Trigger
- Sound, Light and IR Beam Triggers
TRIGGER TIME: Selectable for 5ms (1/200 sec.) to 5 seconds
DELAY TIME: Short delay 1ms (1/1000 sec.) to 100ms (1/10 sec.) - Long delay 1000ms (1/10 sec.) to 10 seconds.
TRIGGER MODES: Manual, auto 1 shot, auto re-arm.
FOCUS ACTIVATION: Manual activation.
SENSOR MODES: Flash, infra-red beam, sound.
IR BEAM: Range 20cm to 2m. Wavelength 850 nm.8 degrees or 2 degrees with focal baffle.
FLASH SENSOR: Range 1 to 1500 lumens. Sensitivity 10 lumens.
SOUND RESPONSE: Microphone sensitivity frequency response 50 to 5000 Hz.
TRIGGER OUTPUTS: x3 open collector (x2 trigger, x1 focus). 50 v DC max at 100 milliamps.
POWER REQUIREMENTS: x4 AA batteries, high power type, non-rechargeable - AC to low voltage PSU 6 to 9 VDC at 100 milliamps. MP1 Mains power unit recommended.
POWER CONSUMPTION: About 40 milliamps. When IR TX module is connected this rises to 80 milliamps.
SIZE: Controller - (W)19cm x (D)14cm x (H)5cm Sensors (W)7.5cm x (D)5cm x (H)2.6cm.
SENSOR MOUNTING: 1/4 inch UNC thread (standard tripod thread).
MINI TRIPOD HEIGHT: 8 cm min. 17 cm max. WEIGHT:
MCT-1 Controller 325g. Sensors 43g. Tripods 33g. Kit 950g.
TEMPERATURE: 0 to 35 degrees C (operating). -10 to 50 degrees C (non-operating).
Connection to camera: Many cameras will connect to the TriggerSmart MCT-1 with the cable provided in the kit. Some cameras will need other dedicated cable connections.