PRO-7B 1200WS

• 100% recycling from 0.1 - 2.8 sec.
• 250 full power flashes per charge
• Short flash durations from 1/1,400 sec to 1/3,000 sec.
• 7 stop range in 1/6 step output adjustments
• Asymmetrical/ Symmetrical light distribution to two lamp head outlets
• Heavy Duty, ergonomic design
• Profoto special non arcing lamphead safety connectors
• Auto-diagnostic start-up circuitry
• Switchable acoustic signal "beeps" when unit is fully recycled
• Built-in photocell slave sync
• 100 Watt Halogen modeling light
• Can be operated while charging

Meeting the Challenges on Location
Working on location is always a challenge: There is not enough time. There is not enough space. There is not enough light. And worse: there is no electricity. Avoiding the inconvenience of a gas generator, you will look for battery-powered gear. Which traditionally means serious compromise in power and features. But not any more. Leaving the studio with the Profoto Pro-7b, you are bringing 250 full power 1200 Ws flashes. Along with two lamp outlets accepting the entire range of Profoto light shaping tools. And all of that in a box that recycles in just 2.8 seconds.

Use it While Recharging it
Back in the studio, using the snap-on universal power adapter, the Pro-7b can actually operate as a regular ?ash generator while the battery is being recharged. The adapter is fast, charging an empty battery in just 2.5 hours, and it accepts a wide range of input power: 12