|
|
|
|
/images/product/main/S-020378x500.jpg;jsessionid=AC6F2F38060F7BEE427BD7D7D355A36B
/images/product/main/S-020378x500.jpg;jsessionid=AC6F2F38060F7BEE427BD7D7D355A36B
|
|
|
|
|
|
|
|
|
In store pricing may vary. Why?
Our stores are staffed with a wide variety of product specialists and support staff, each of whom make an effort to be responsive and pleasant to deal with. We're also able to provide a customer with any item from our inventory to inspect and test. The cost of this customer service is an increased overhead for our in-store prices, to pay for the store space, the training of our employees, and other considerations not present online. We're happy to offer reduced prices online and hope that you will be satisfied with your purchase no matter where you decide to buy.
|
|
Only -1 left in stock.
|
|
|
|
|
|
|
|
 |
 |
|
|
|
|
Description
Specification
Items Included
*IMPORTANT NOTICE: This product is Open Box and may have minor scratches or imperfections. It includes all necessary accessories, however may be missing some items found in the original packaging. It has been inspected, appears to be in good working condition, and comes with the full manufacturer's warranty. If you are at all unsatisfied with its condition, you may return it for a full refund or exchange.
The the Kenko Auto Digi Meter For Ambient and Flash Light is a user-friendly light meter for reading both ambient and flash light. The large LCD display reads out in "F" numbers in 10ths of stops and in 1/2 stop increments in a pointer scale across the top of the display. With a shutter speed range of 1/8000 second to 30 minutes, this meter is quite sensitive. In its cine mode, frame rates of 8-128 can be achieved.
The KFM-1100 has two memory "slots" to store previous measurements that can be recalled for reference or for averaging. Just press the "M" button after each reading to store it in memory. If the memory has two readings stored, it will delete the oldest reading to store the current information.
Features:
- Ambient Light Readings: The KFM-1100 shutter speed can be selected in a range from as long as 30 minutes to as fast at 1/8000 of a second (This range is selectable in full stop, _ stop or 1/3 stop increments). The light reading is displayed on the meter’s LCD window as both digital and analog data. If you wish to select a different shutter speed after a reading is taken, the aperture reading will automatically change accordingly. The KFM-1100 can read a very wide range of light from the very low equivalent EV -2.0 to EV 19.9 (incident light based on ISO 100). The meter can also be set to a Cine mode to be used with Cine cameras and display light readings from 8 to 128 frames/sec.
- Flash Light Reading: When using with flash, select Cord or Non-Cord depending on the shooting conditions. For Cord setting, connect the Flash sync-cord to the Sync Terminal in the front of the KFM-1100 then a light reading can be taken by simply pressing the Measurement button on the side of the meter. When using a non-cord set-up, pressing the measurement button sets the meter in stand-by mode. When the flash is fired manually, the meter takes a reading.
- Calculation Function: The KFM-1100s calculation function can be used to average readings stored in memory or bias exposures toward shadow or highlights when taking reflected light readings. This allows for more accurate recording of shadow or highlight detail.
- Analyze Function: When taking readings in mixed flash and ambient lighting, the KFM-1100 can measure the flash and ambient light almost simultaneously. The percentage of flash light in the over-all exposure is then displayed in the analyze scale on the LCD. The analyze scale is divided into 4 sections, each section represents flash contribution of approximately 25% of the total lighting. For example, if 3 sections of the analyze scale are lit, the flash to ambient light ratio is approx. 75% flash to 25% ambient. After taking a reading, the shutter speed can be changed and the meter will recalculate the exposure. Setting a slower shutter speed would result in a greater ambient to flash ratio. Setting a faster shutter speed would result in a lesser ambient to flash ratio. The analyze scale helps you balance the 2 sources of lighting for more predictable results, so you can set the lighting and exposure to get the look you want. 25% of exposure is from flash. 50% of exposure
- Memory: The KFM-1100 has memory slots to store 2 separate readings. Both stored readings and the current reading are displayed simultaneously in the analog scale. Memory markers also show the number of stored readings. Having readings stored in memory makes it easier to analyze the contrast range of your subject, the lighting ratio or viewing several separate readings in relation to one another.
- Monitor Function: The KFM-1100 has a brightness difference function that can be used to adjust lighting ratios or check for background light uniformity, very useful for product photography, portraits, etc. Checking for lighting uniformity across the entire seen is a critical use for light meters.Simply take a reading on your main reference point, then press the S/A/H button and then take reading on the other areas of the scene. The meter will display the brightness differences in term of +/- EV in 0.1 EV increments.
- Custom Settings: At any time you can set the display readings to your liking for: Selecting the shutter speed stops (1, _, 1/3 stops) Selecting the F no. Display mode (F number + 0.1 increment intermediate value display, or just F number direct reading display) Selecting the exposure correction value (EV – 10 to 10).
Light Meters Information
| Light Measuring Method |
Ambient - Ambient light
Cord - Flash with sync cord
Non-Cord Flash without sync cord |
| Light Measuring Method |
Incident - Spherical diffuser; Silicon photocell |
| Ev Range |
-17 to 40.8 (0.1 stop increments) |
| Multiple Flash |
Not Specified by Manufacturer |
| Display |
LCD type; F No. 1.0 to 128 + 0.9 stops (0.1 stop increments) |
| Power Source |
One "AA" battery (not included); Battery life: approx 50 hours in Ambient mode |
| Dimensions |
2.25 x 6.2 x 1.0 In. (57 x 157 x 26mm) (WHD) |
| Weight |
4.7 oz (135g) without battery |
Items Included With This Product
Spherical Diffuser
Neck Strap
Case
One-Year Warranty
 |
Be the first to write a review by signing in and/or submitting your review below |
|
You must be logged in to review an item.
Please log in below. |
|
|
|
|
|
|
|
|
|
|
|
Call us toll free at 1-800-321-4726 for customer service & ordering.
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors.
Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
|
