Web Pricing - Why are the prices on this web site different from those in your stores?
Our stores are staffed with a wide variety of product specialists and support staff, each of whom make an effort to be responsive and pleasant to deal with. We're also able to provide a customer with any item from our inventory to inspect and test. The cost of this customer service is an increased overhead for our in-store prices, to pay for the store space, the training of our employees, and other considerations not present online. We're happy to offer reduced prices online and hope that you will be satisfied with your purchase no matter where you decide to buy.
The FT1 Mount Adapter allows you to use certain legacy F Mount NIKKOR lenses (those designed for use with Nikon D-SLR/SLR cameras) on the Nikon 1 V1. The Mount Adapter is attached to the Nikon 1 V1 and the F Mount NIKKOR lens then attached to the adapter. The FT1 will add an angle of view of 2.7 times that of the F Mount NIKKOR lens' focal length.
To use the FT-1, the Nikon 1 J1/V1 camera's firmware must be updated to at least version 1.10.
F mount lenses mounted on the FT-1 have a crop factor of 2.7×. Enjoy an angle of view equivalent to that of a super telephoto lens when a telephoto lens is used. (Example: When using a 300mm lens, the equivalent angle of view is that of an 800mm lens.)
When using the FT-1 and a compatible AF-S NIKKOR F-Mount lens, users can take full advantage of the Nikon 1's high-speed continuous shooting of 10/30/60 fps. (*When an AF-S lens is used. However, focus is locked with the first shot with continuous shooting.)
[P], [S], [A], and [M] exposure modes can be used with CPU lenses.
Vibration reduction (VR) functions when VR lenses are used. Enable vibration reduction, or specify a setting, using switches on the lens. NORMAL/ACTIVE modes are supported when lenses equipped with these modes are used. VR functions in NORMAL mode when lenses not equipped with the NORMAL/ACTIVE modes are used.
The Smart Photo Selector function cannot be used.
Supports 65 existing F-mount NIKKOR lenses
AF/AE supported with AF-S lenses only. Autofocusing is possible when AF-S lenses are used. However, focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point with only the center focus point used.
The focus indicator (rangefinder) can be used with CPU lenses.
[A] and [M] exposure modes can be used with non-CPU lenses. Aperture is specified using the aperture ring on the lens.
Shooting in Motion Snapshot mode is only possible when focus has been acquired with an AF-S lens.
Be the first to write a review by signing in and/or submitting your review below
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.