Its response has been tailored to give a rich, full, broadcast quality with an emphasized proximity effect, making it an ideal 'on air' radio microphone, equally fitting for voice over applications for film and television.
The Broadcaster features an internal pop filter, designed to minimize plosives sounds that can overload the microphone capsule and distort the audio output.
In addition to the Broadcaster's native 20Hz-20kHz response a selectable high-pass filter at 75Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. For more information please see the user manual.
The RØDE Broadcaster microphone is covered by RØDE Microphones' industry leading 10 year warranty.
|Transducer||Externally Polarized 25mm (1 In.) Condenser|
|Power||+48V, +24V Phantom Power|
|Frequency Response||20Hz - 20kHz|
|Dynamic Range||>114dB (per IEC651, IEC268-15)|
|Signaltonoise Ratio||>80dB (1kHz rel 1Pa; per IEC651, IEC268-15)|
|Maximum Input Sound Level||128dB SPL (@ 1% THD into 1k ohms)|
|Output Connectors||3-pin XLR-female|
|Low Frequency Rolloff||12dB / octave, -3dB @ 120Hz|
|Dimensions||6.57 x 1.97 In. (167 x 50mm) (Length x Diameter)|
|Weight||1.3kg (577g) mic only|