Web Pricing - Why are the prices on this web site different from those in your stores?
Our stores are staffed with a wide variety of product specialists and support staff, each of whom make an effort to be responsive and pleasant to deal with. We're also able to provide a customer with any item from our inventory to inspect and test. The cost of this customer service is an increased overhead for our in-store prices, to pay for the store space, the training of our employees, and other considerations not present online. We're happy to offer reduced prices online and hope that you will be satisfied with your purchase no matter where you decide to buy.
Only -1 left in stock.
Special Order Item.
Special Order items are non-refundable.Call for Availability
The BeachTek DXA-SLR PRO HDSLR Audio Adapter is designed to enhance audio quality with virtually any HDSLR camera by providing high quality XLR inputs, AGC disabling, built-in limiting, headphone monitoring, comprehensive metering and more. Connect up to two microphones and provide 12 or 48V phantom power to professional condenser microphones.
Each channel features a gain control switch with 0 and 15dB settings, and the low-noise preamplifiers and throughput ensure pristine audio quality, wide frequency response and detail. The AGC (Automatic Gain Control) disabling feature eliminates audio level fluctuations that can ruin an otherwise good take. The unit is built tough, mounts to the base of HDSLR cameras, and its rear mounted VU meter displays level in 3 dB increments.
Note! Certain cameras, including Panasonic Lumix and Nikon cameras, require particular cables for proper functioning.
Two XLR Inputs
High quality Neutrik XLR inputs allow you to connect professional grade microphones
12 or 48V phantom power can be sent to each channel for powering condenser microphones
Each channel features a switchable 15dB gain switch
Limiters protect against noise and distortion caused by unpredictable peaks and loud signals
The AGC Disable feature allows the camera to record clean audio without wavering levels caused by the camera's AGC compensation
Comprehensive VY metering with an intuitive LCD screen mounted on the back. The meter levels in 3dB increments
The headphone output enables the monitoring from the adapter during recording. The camera's audio playback can be monitored with the A/V output connected to the adapter, rather than having to listen via the camera's built-in speaker
Low Noise preamplifiers
The adapter's low-noise, low distortion and wide-frequency response preamps ensure superb audio quality
Maximum Input: Mic: -3 dBu / Line: +14 dBu
Output Level: Nominal microphone levels
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: less than 0.01% @ 1 kHz, -30 dBu input
SNR: 85 dB @ 1 kHz, -30 dBu input
Gain: LO Gain: 0 dB / HI Gain: 15 dB
Phantom Power: Dual regulated 12 or 48 V power supplies
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9 V alkaline or lithium battery
Battery / Runtime: Alkaline: 3 hours typical (no phantom) / Lithium: 8 hours typical (no phantom)
Dimensions: (WxDxH) 6 x 3.75 x 1.75" (152 x 95 x 45 mm)
Weight: 18 oz (510 g)
Be the first to write a review by signing in and/or submitting your review below
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.