Web Pricing - Why are the prices on this web site different from those in your stores?
Our stores are staffed with a wide variety of product specialists and support staff, each of whom make an effort to be responsive and pleasant to deal with. We're also able to provide a customer with any item from our inventory to inspect and test. The cost of this customer service is an increased overhead for our in-store prices, to pay for the store space, the training of our employees, and other considerations not present online. We're happy to offer reduced prices online and hope that you will be satisfied with your purchase no matter where you decide to buy.
Only -1 left in stock.
Special Order Item.
Special Order items are non-refundable.Call for Availability
The RM222 Riggy-Micro Dual-XLR Preamplifier with Phantom PowerjuicedLink is designed for cameras featured with audio meters, manual gain control, and a headphone output. It is highly efficient in operation, small size, and has a lightweight design for mounting flexibility.
It features 2 locking XLR input channels with low-noise microphone preamplifiers with a Mic/Line level switch, a Hi/Lo gain switch, and a Phantom power switch. The onboard Phantom power voltage is selectable between 48V/12V. The inputs can also be summed mono, copying each input to both sides. It uses 9v battery for powering up.
2XLR inputs low-noise preamp with 48V/12V phantom power. "Riggy-Micro" means that it is super small/light/power efficient and has numerous mounting and accessory options. Audio output bracketing for camera overload protection. Alkaline/LiPolymer operation. Selective power-down mode.
The Riggy-Micro RM222 is a feature rich low noise preamp, built tough, and refined to provide the best power efficiency, smallest size, and lightest weight. It's small size and light weight also makes it unique in terms of flexibility for mounting it to your gear. Additionally, it has features that make it even more useful, allowing you to mount other accessories (mics, wireless receivers, etc) to the preamp.
It is more than just a low-noise preamp with sweet audio features. It takes advantage of the valuable real estate when mounted to your camera to be able to mount more accessories to your camera (mics, wireless receivers, etc.). First, the Riggy-Micro has Riggy mounting points allowing you to mount a RB401 Riggy Bracket, which has 4 cold shoe mounts and lots of mounting holes for attaching more accessories to your camera, like microphones and wireless receivers, etc.
The Riggy-Micro is also so small and light, that it can be mounted on top of your camera in the hot-shoe. It's quite nice to get the preamp off of the bottom of your camera. Now, you can attach a battery grip, or just cradle the camera/lens in the palm of your hand, like a DLSR is traditionally held. You will seperately purchase a cold-shoe to 1/4-20 male to mount to the 1/4-20 female on the bottom of the Riggy-Micro. While mounted on top of your camera, you can add cold shoe mounts (one on the top, and another on the right side) directly to the Riggy-Micro enclosure, using the RB101 Riggy Cold Shoe Attachment.
Two Locking XLR Input Connectors
Low-Noise Microphone Preamplifiers
Switchable 12V / 48V Phantom Power
Audio Output Bracketing Feature
Mic/Line Signal Level Switches
Hi/Lo Gain Level Switches
Optional Mono Summing
1/8" Output for DSLR Compatibility
Powered by a 9V Battery
Items Included With This Product
9 In. (23cm) Length, 1/8 In. (3.5mm) TRS Stereo Audio Cable
1/8 In. Hex Key
Black Nylon 1/4-20 Nut
Limited 1-Year Warranty
Be the first to write a review by signing in and/or submitting your review below
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.