MAIL ORDER 800-321-4726

ATW-1812D - 1800 Series Portable Wireless Microphone System

Part #: ATW1812D
In-store prices may vary
Select Size:




Items Included

Rate & Review

With UHF reception (996 frequencies user-selectable in 25 kHz steps), Audio-Technica’s ATW-1812D - 1800 Series Portable Wireless Microphone Systems provide extremely flexible, professional and easy-to-use portable wireless solutions. The 1800 Series is available in dual-channel and single-channel systems.

For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities.

For those using a single microphone, the single-channel 1800 Series systems include the ATW-R1810 single-channel receiver.

1800 Series wireless systems come equipped with a choice of plug-on and body-pack transmitters. The ATW-T1801 UniPak® body-pack transmitters feature a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials® microphones. The ATW-T1802 plug-on transmitters feature a locking XLR connector for adapting dynamic and condenser microphones. Both transmitters offer selectable high and low transmission modes to conserve battery life/maximize power.

Additional 1800 Series features include automatic frequency scanning, Tone Lock™ squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction.

  • Compact receiver is easy to mount on a camera
  • UHF reception with 996 frequencies selectable in 25kHz steps
  • Automatic frequency scanning for easy selection of open channels
  • Tone Lock squelch system eliminates interference when transmitter is off
  • Two independent balanced outputs (dual-channel systems)
  • Headphone monitor output with independent level control
  • Battery fuel-level indicators on transmitters and receiver
  • Soft-touch controls for easy frequency selection
  • True Diversity operation for resistance to multi-path interference and dropouts
  • LCD frequency and battery status display with backlight
  • Antenna and AF Peak LED indicators
  • Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)
  • Transmitters operate in low or high transmission modes to conserve battery life/maximize power
  • Easy, user-friendly operation
  • Clear, natural sound quality
  • Powered by AA batteries
  • System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

Customers Also Browsed

  • Rode Microphones - RodeLink Wireless Filmmaker Kit
  • Sennheiser - AVX Lavalier Pro Wireless Set (MKE2 Lavalier)
  • Sennheiser - ew 100 ENG G3 Wireless Microphone System Combo - A (516-558 MHz)
  • Sony - WCS-999 Lavalier Microphone System
  • Sennheiser - ew 122-p G3 Camera Mount Wireless Microphone System (626-668 MHz)
    Special Order
    Call to Order: 1-800-321-4726
  • Azden - PRO-XD Digital Wireless Lavalier System
  • Sennheiser - AVX EKP Camera Plug-On Wireless Receiver
  • Lectrosonics - L Series LR Receiver/LMb Beltpack Transmitter and Mic with Accessory Kit (A1: 470.100 - 537.575 MHz)
  • Sennheiser - AVX Lavalier Wireless Set (ME2 Lavalier)
  • Shure - FP Handheld Wireless System
    Special Order
    Call to Order: 1-800-321-4726
  • Shure - FP3 Wireless Plug-In Transmitter (H5 / 518 - 542MHz)
  • Azden - WR32-Pro VHF Dual-Channel Receiver for DSLR (169.445 and 170.245 MHz)
Microphones Information
Polar Pattern Not Applicable
Power 12V DC nominal, 500 mA
Frequency Response 70Hz to 15kHz
Dynamic Range 100m (300') typical
Signaltonoise Ratio 104dB at 30kHz deviation (A-weighted), maximum modulation 37kHz
Output Connectors 3-pin mini XLR (TA3M-type)
Battery Type ATW-R1820: Six 1.5V AA alkaline (not included) - 6 hours (typ.) ATW-R1810: Four 1.5V AA alkaline (not included) - 10 hours (typ.)
Dimensions Transmitter: 1.57 x 4.37 x 1.57" (40 x 111 x 40mm)/ Receiver: 4.92 x 2.95 x 1.25" (125 x 75 x 32mm)
Weight Transmitter: 199 grams (7.0 oz) (without batteries)/ Receiver: 10.5 oz (300 g) (with battery)
  • ATW-R1810 Receiver
  • ATW-T1802 Plug-In Transmitter
  • Antennas
  • Receiver Belt Pouch
  • Receiver Output Cable with Industrial Hook and Loop Fastener (18-inch)
  • 1 Year Warranty
Be the First to write a Review.
See any errors? Let us know.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.