MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: WS58

This BeyerDynamic product is the wind screen for the M 58 microphone, charcoal-gray.
Part #: KTDR100

The K-Tek Topper is a custom-tailored windscreen designed to reduce the effects of wind noise on the Tascam DR-100 audio recorder.
Part #: SMWSFG

The MyMyk Windshield for SmartMyk Microphone is a slip-on, open-cell, reticulated foam with an integral fur cover that provides excellent wind protection whilst safeguarding your SmartMyk in the most difficult of conditions. SmartMyk Windshield successfully reduces wind noise by up to 20dB without...
Availability: In Stock
$6600
QTY
Part #: BLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
QTY
Part #: WS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE MICROPHONES:...
Availability: In Stock
$5900
QTY
Part #: WS7

The Rode WS7 Deluxe Wind Screen provides excellent noise protection against high wind and adverse weather conditions.

The slip-on design of the WS7 features dimensions that accommodate the Rode NTG2 and NTG1 microphones; as well as any shotgun or stereo mic with a length of 7.25" (186.5mm) and...
Availability: In Stock
$5900
QTY
Part #: DEADWOMBAT

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.
Availability: On Backorder
$4995
QTY
Part #: DEADCATVMPR

The Rode Microphones DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimize wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote...
Availability: In Stock
$3900
QTY
Part #: DEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
QTY
Part #: DEADCATVMP

The Dead Cat Wind Muff is an artificial fur wind cover for the VideoMic. The windshield is designed for minimizing any wind noise when recording in high wind conditions. The Dead Cat protects against wind noise while remaining acoustically transparent and accurate.
Availability: On Backorder
$3900
QTY
Part #: DEADCATGO

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
$2995
QTY
Part #: MINIFURLAV

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.
Availability: In Stock
$2499
QTY
Part #: DEADKITTEN

The Dead Kitten Windshield is designed for minimising any wind noise when using a microphone in high wind conditions.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Availability: In Stock
$2499
QTY
Part #: WS2

Rode WS2 Windscreen is built to fit NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster Microphones. Properly equip your microphone with the WS2 to avoid wind noise and pop.
Availability: In Stock
$1999
QTY
Part #: WS4

Rode WS4 Windscreen in grey is built to fit the NT4 microphone. Properly equip your microphone with the WS4 to avoid wind noise and pop. If you have a Rode NT4 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Availability: In Stock
$1999
QTY
Part #: WS5

Rode WS5 Windscreen is built to fit the NT5 microphone. Properly equip your microphone with the WS5 to avoid wind noise and pop. The WS5 Windscreen is designed to fit If you have a Rode NT5  microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Availability: In Stock
$1999
QTY
Part #: WS3

The Rode WS3 Windscreen provides additional protection for the microphone capsule against any wind noise or plosives.

Compatibility: If you have a Rode NT3 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Availability: On Backorder
$1999
QTY
Part #: WSHS1B

The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-B is supplied as a pack of three.
Availability: On Backorder
$1199
QTY
Part #: WSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
QTY
Part #: WSHS1P

The WS-HS1-P is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-P is supplied as a pack of three.
Availability: On Backorder
$1199
QTY
Part #: WSLAV

The Rode WS-LAV Pop Filter is a package of 3 pop-filter windscreens for Rode lavalier microphones. The WS-LAV effectively minimizes popping and sibilance noise while keeping the microphone acoustically transparent.
Availability: In Stock
$1199
QTY
Part #: MZW60-1

The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight, rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
Part #: MZH601

The MZH60-1 Long hair wind muff provides maximum protection against wind noise.

It is used together with the MZW 60-1
Part #: MZW65PRO

The Sennheiser MZW65 Pro Foam Windscreen for ME65 Microphone (Black) is a black velour coated foam windscreens which offer even greater protection for reducing wind and popping noise for ME-65.
Availability: In Stock
Part #: MZH600

For outside broadcasting - a combined foam windshield and hairy cover that reduces wind noise most effectively. The Sennheiser MZH 600 Windshield is an accessory for the MKE 600 shotgun mic. The MZH 600 Windshield features a combination of foam and faux fur that diffuses wind noise during outdoor...
Availability: On Backorder
$6995
QTY
Part #: MZW66PRO

The Sennheiser MZW66PRO is a black velour windscreen for the ME66 Microphone.
Part #: MZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
Part #: MZW2A

The MZW-2 Steel Mesh Grill is for the MKE platinum and MKE-2 Microphones.
Part #: 528117

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

Please note: Microphone not included
Availability: In Stock
Part #: MZW4EW

MZW-4EW Evolution Wireless Foam windscreen for ME4 Lavalier Microphone.
Availability: In Stock
Part #: SG200

SG-200 Windscreen with 1" Inside Diameter. Will fit Sony BVW-200, BVW-300, BVW-400 and BVW-D600 Betacam Microphones.
Availability: In Stock
$2695
QTY
Part #: APH6

The Zoom APH-6 Accessory Pack for the Zoom H6 Handy Digital Recorder includes a windscreen that provides a professional level of wind noise prevention, a remote controller with REC, PLAY, STOP and other functions and an USB-type AC power adapter.

Features:
  • Wired Remote Controller
  • Hairy Win
...
Availability: In Stock
$5999
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]