MAIL ORDER 800-321-4726
Windscreens
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
  • NTG-2
  • NTG-3
...
Availability: In Stock
$3900
QTY
MFR Part #: BLIMP
Samy's Part #: RODMBLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
QTY
Free Shipping
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: On Backorder
$2995
QTY
MFR Part #: DEADCATVMP
Samy's Part #: S-012745

The Dead Cat Wind Muff is an artificial fur wind cover for the VideoMic. The windshield is designed for minimizing any wind noise when recording in high wind conditions. The Dead Cat protects against wind noise while remaining acoustically transparent and accurate.
Availability: On Backorder
$3900
QTY
MFR Part #: WSVM
Samy's Part #: RODMWSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives. The WSVM is designed to fit Rode's NTG1 and NTG2 directional condenser microphones, and the VideoMic shotgun microphone.

Suitable for Rode NTG1, NTG2 & VideoMic
Availability: In Stock
$1199
QTY
MFR Part #: WS6
Samy's Part #: RODMWS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE MICROPHONES:...
Availability: In Stock
$5900
QTY
Free Shipping
MFR Part #: DEADCATVMPR
Samy's Part #: S-041593

The Rode Microphones DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimize wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote...
Availability: On Backorder
$3900
QTY
MFR Part #: APH6
Samy's Part #: S-027166

The Zoom APH-6 Accessory Pack for the Zoom H6 Handy Digital Recorder includes a windscreen that provides a professional level of wind noise prevention, a remote controller with REC, PLAY, STOP and other functions and an USB-type AC power adapter.

Features:
  • Wired Remote Controller
  • Hairy Win
...
Availability: In Stock
$5999
QTY
Free Shipping
MFR Part #: DEADKITTEN
Samy's Part #: S-014718

The Dead Kitten Windshield is designed for minimising any wind noise when using a microphone in high wind conditions.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Availability: In Stock
$2499
QTY
MFR Part #: BK1G
Samy's Part #: PSCPBK1G

Purpose designed to fit with mini mics/lapel mics including the Sanken Cos 11 and Tram to name but a few. As with all windsocks an area of air needs to be created so it's recommended they are used in conjunction with your factory style foam windsock or in the case of the Sanken or similar the...
Availability: In Stock
$1000
QTY
MFR Part #: Z-FSO-L
Samy's Part #: KTEKZFSOL

The K-Tek Zeppelin Slip-On Windscreen (Long) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
QTY
Free Shipping
MFR Part #: MZW400
Samy's Part #: SENNMZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
$3895
QTY
MFR Part #: WS5
Samy's Part #: S-015377

Rode WS5 Windscreen is built to fit the NT5 microphone. Properly equip your microphone with the WS5 to avoid wind noise and pop. The WS5 Windscreen is designed to fit If you have a Rode NT5  microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Availability: In Stock
$1999
QTY
MFR Part #: MINIFURLAV
Samy's Part #: S-015370

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.
Availability: On Backorder
$2499
QTY
MFR Part #: WS7
Samy's Part #: RODMWS7

The Rode WS7 Deluxe Wind Screen provides excellent noise protection against high wind and adverse weather conditions.

The slip-on design of the WS7 features dimensions that accommodate the Rode NTG2 and NTG1 microphones; as well as any shotgun or stereo mic with a length of 7.25" (186.5mm) and...
Availability: In Stock
$5900
QTY
Free Shipping
MFR Part #: 528117
Samy's Part #: S-010523

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

Please note: Microphone not included
Availability: In Stock
$995
QTY
MFR Part #: SG200
Samy's Part #: WINDSG200

SG-200 Windscreen with 1" Inside Diameter. Will fit Sony BVW-200, BVW-300, BVW-400 and BVW-D600 Betacam Microphones.
Availability: In Stock
$1200
QTY
MFR Part #: MZH600
Samy's Part #: S-035521

For outside broadcasting - a combined foam windshield and hairy cover that reduces wind noise most effectively. The Sennheiser MZH 600 Windshield is an accessory for the MKE 600 shotgun mic. The MZH 600 Windshield features a combination of foam and faux fur that diffuses wind noise during outdoor...
Availability: In Stock
$6995
QTY
Free Shipping
MFR Part #: MZW4EW
Samy's Part #: SENNMZW4EW

MZW-4EW Evolution Wireless Foam windscreen for ME4 Lavalier Microphone.
Availability: In Stock
$995
QTY
MFR Part #: MZW2EW
Samy's Part #: SENNMZW2EW
Availability: In Stock
$1295
QTY
MFR Part #: WS4
Samy's Part #: S-015376

Rode WS4 Windscreen in grey is built to fit the NT4 microphone. Properly equip your microphone with the WS4 to avoid wind noise and pop. If you have a Rode NT4 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic.
Availability: In Stock
$1999
QTY
MFR Part #: Z-FSO-M
Samy's Part #: KTEKZFSOM

The K-Tek Zeppelin Slip-On Windscreen (Medium) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek's unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing - making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
QTY
Free Shipping
MFR Part #: Z-FSO-S
Samy's Part #: KTEKZFSOS

The K-Tek Zeppelin Fuzzy Slip-On Windscreen (Short) is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek’s unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing – making the Fuzzy the only slip-on windscreen...
Availability: In Stock
$7600
QTY
Free Shipping
MFR Part #: KTH1
Samy's Part #: S-011553

The K-Tek Microphone Windscreen Topper for Zoom H1 is designed to reduce wind noise and vocal plosives for clear recordings overcome the noise which is created when moving your H1 recorder. Also provides some protection against rain and dust, the topper is made of synthetic black short-hair fur.

...
Availability: In Stock
$2850
QTY
MFR Part #: MZW65PRO
Samy's Part #: S-020019

The Sennheiser MZW65 Pro Foam Windscreen for ME65 Microphone (Black) is a black velour coated foam windscreens which offer even greater protection for reducing wind and popping noise for ME-65.
Availability: In Stock
$8495
QTY
Free Shipping
MFR Part #: SMWSFG
Samy's Part #: S-032365

The MyMyk Windshield for SmartMyk Microphone is a slip-on, open-cell, reticulated foam with an integral fur cover that provides excellent wind protection whilst safeguarding your SmartMyk in the most difficult of conditions. SmartMyk Windshield successfully reduces wind noise by up to 20dB without...
Availability: In Stock
$6600
QTY
Free Shipping
MFR Part #: KLTFG
Samy's Part #: S-047518

The K-Tek Fuzzy Topper Windscreen for Lavalier Microphones (Grey) is a faux-fur lavalier windscreen used to protect the microphone against the noise by high wind and to produce optimum results. The windscreen is universal sized to fit most of the models and is ideal in speech capturing outdoors.

...
Availability: In Stock
$1900
QTY
MFR Part #: 065102
Samy's Part #: S-047526

The Rycote Undercover - Lavalier Wind Cover (Gray) is the perfect solution to completely hide lavalier microphones. Used with the included Stickies, these soft, fabric discs are designed to minimize the sound of clothing movement while providing protection from light wind. The adhesive is peeled...
Availability: In Stock
$1295
QTY
MFR Part #: KTZOOMH5
Samy's Part #: S-047530

The K-Tek Microphone Windscreen Topper for Zoom H5 is made of high-grade synthetic black short hair fur and it is designed for Zoom H5 handy recorder. Toppers are designed to protect the recorder against the noise by high wind and to produce optimum results. Simply moving a recorder microphone...
Availability: In Stock
$3800
QTY
MFR Part #: KTZOOMH6XY
Samy's Part #: S-047531

The K-Tek Microphone Windscreen Topper for Zoom H6 XY Capsule is made of high-grade synthetic black short hair fur and it is designed for Zoom H6 handy recorder. Toppers are designed to protect the recorder against the noise by high wind and to produce optimum results. Simply moving a recorder...
Availability: In Stock
$3800
QTY
MFR Part #: MZH601
Samy's Part #: SENNMZH601

The MZH60-1 Long hair wind muff provides maximum protection against wind noise.

It is used together with the MZW 60-1
MFR Part #: MZW60-1
Samy's Part #: S-033518

The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight, rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
MFR Part #: DEADWOMBAT
Samy's Part #: S-015369

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.
MFR Part #: KZEPPM
Samy's Part #: KTEKZEPPM

The K-Tek Zeppelin Wind Protector (Medium) is a simple and effective wind protector for shotgun microphones. A fleece material is backed with a tough, tight-weave fabric and fitted over a body of open cell foam. The Fleece is designed to slip easily and snugly over most shotgun microphones and...
MFR Part #: WSHS1B
Samy's Part #: S-015371

The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-B is supplied as a pack of three.
MFR Part #: WS58
Samy's Part #: BEYEWS58

This BeyerDynamic product is the wind screen for the M 58 microphone, charcoal-gray.
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]