MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: OSMO
Buy a DJI OSMO and as a Bonus get 2 batteries for FREE!
$56900
QTY
Free Shipping
Part #: OSMOPART47

The DJI Osmo Z-Axis for Zenmuse X3 Gimbal And Camera can significantly reduce vertical shaking from natural arm movements when walking or jogging. It is compatible with the Zenmuse X3 gimbal and camera.

Features:
  • Significantly reduce vertical shaking
  • Compatible with the Zenmuse X3 gimbal and
...
Availability: On Backorder
$12900
QTY
Free Shipping
Part #: FYG4S

The Feiyu G4S 3-Axis Handheld Gimbal for GoPro HERO is a 3-Axis handheld Gimbal for the GoPro with a 4 way Joystick. It allows for a full 360 degree panning and tilting. With its intelligently designed, built-in USB interface, you can charge your Gopro directly from the device. A built in 1/4"...
Availability: On Backorder
$24800
QTY
Free Shipping
Part #: C08D9

The Benro MoveOver8 35.4" Dual Carbon Rail Slider is ideal for strength and lightweight support, the MoveOver8 includes two 100% 18mm carbon fiber rails. The carriage operates using 4 quiet operation bearings that run along two carbon fiber rods providing smooth movement for your shot. Center mounting the...
Availability: In Stock
$49900
QTY
Free Shipping
Part #: SL-V 1200

The Slidecam V-1200 Camera Slider is 3.94 ft long slide having three ball bearing sliding rollers. The slider track has three sets of 1/4"-20 and 3/8"-16 mounting holes to support it in the center or at both ends. It also has two removable height adjustable legs for using the slider on the ground....
Availability: In Stock
$30600
QTY
Free Shipping
Part #: M9LC46

The Motionnine Linecam 46 Slider (18 In.) is very compact and solid slider. It's small but gives a long enough and beautiful performance. Linecam consists of two rail shafts and two moving blocks. And it travels about twice the distance of its original length on the tripod. So it allows you a...
Availability: In Stock
$39900
QTY
Free Shipping
Part #: A04S6

The Benro MoveOver4 23.6" Aluminum Rail Slider is a basic level tool for shooters who want to add cinematic, linear motion to their productions. The carriage operates using 4 bearings that runs along two stainless steel embedded rods providing smooth movements for your shot. Their articulating...
Availability: In Stock
$19900
QTY
Free Shipping
Part #: H4NPRO

The Zoom H4n Pro 4-Channel Handy Recorder isn't just improved, it's superior in every way. With advanced X/Y microphones, incredibly natural-sounding preamps, and a super-low noise floor, you can record everything from the Indy 500 to the fluttering of a hummingbird with extraordinary realism....
Availability: In Stock
$19999
QTY
Free Shipping
Part #: VASCSLLITE600

The Varavon Slide Cam Lite 600 is a precisely machined 2 feet long camera slider with a ball-bearing slide mechanism. Two removable and height adjustable legs can raise the slider up to 2 inches off of the ground. The slider can be adjusted in variety of positions to get desired shooting position...
Availability: In Stock
$19800
QTY
Free Shipping
Part #: SY500002GP

The SYNC Technology Adventure Camera Stabilizer for GoPro HERO Cameras facilitates to capture stable handheld footage with your GoPro camera. It features a 2-axis gimbal with brushless motors and utilizes a gyroscope to to keep your camera level and smooth. The SYNC Adventure Camera Stabilizer...
Availability: On Backorder
$34999
QTY
Free Shipping
Part #: WBUNDLE

The Redrock Micro microWhip Bundle includes three low-cost, high-quality Arri-style whips in lengths of 3, 12, and 18 inches and is Comparable in build and quality to Chrosziel whips. The Standard arri size also works with other follow focus units and allows camera operators to pull focus at a...
Availability: In Stock
$20850
QTY
Part #: ATOMH2S002

The Atomos Dual-battery Connect H2S Converters are the ultimate conversion and test tools for anyone who needs to convert content from HDMI to HD-SDI (Connect H2S) or from HD-SDI to HDMI (Connect S2H). Connect Converters are the smallest, most versatile video conversion tools on the market. You...
Part #: C12D9

The Benro MoveOver12 35.4" Dual Carbon Rail Slider with Flywheel is ideal for strength and lightweight support, the MoveOver12 includes two 100% 22mm carbon fiber rails. Flywheel with belt drive gives precise control with rubber track belt drive. The carriage operates using 4 quiet operation b...
Availability: In Stock
$74900
QTY
Free Shipping
Part #: DMWSFU1VLOG

In response to the demand from the film production market, log video recording (V-Log L) is now available for the LUMIX GH4, and offers exceptional flexibility as well as wider dynamic range for color grading in post-production process. V-Log / V-Log L were developed to feature similar charact...
Availability: In Stock
$9999
QTY
Free Shipping
Part #: TT-03-GJ

The Tilta Rig Follow Focus Kit features a portable quick-release base plate for 15mm systems. It is a great addition to filming toolkit, allow you to make smooth focus changes while providing a quick and efficient mounting system for your camera.

Features:
  • Portable Quick Release Base Plate
...
Availability: On Backorder
$59900
QTY
Free Shipping
Part #: PFH2

The Pilotfly H2 3-Axis Handheld Gimbal Stabilizer for Cameras (Up to 4.9 lb) is the finest one-hand-gimbal for mirrorless and DSLR cameras we‘ve ever designed. The Pilotfly H2 introduces a whole new way of video shooting with highest versatility, flexibility and power efficiency. The 32bit technology with...
Availability: In Stock
$1,04900
QTY
Free Shipping
Part #: 0041

The V4 Follow Focus with Quick Release is the next evolution in the affordable follow focus design from D|Focus Systems. It is improved in durability, reliability and aesthetics of the V3, while still maintaining the small footprint. The D|Focus V4 is now whipping with custom metal thumbnut instead...
Availability: In Stock
$24999
QTY
Free Shipping
Part #: YOD04
The Phototools Mini Skater Dolly is a high quality adjustable arc dolly for fantastic point of view shots. Compact enough so you can always have a dolly in your bag to set your video production above and beyond! Works great for weddings, corporate videos or even your indie film.

With a fully ad...
Availability: In Stock
$29999
QTY
Free Shipping
Part #: ACCSREADYRIGGS

The Ready Rig GS allows the operator to stop caring about the deadweight out in front, and focus on what matters. This becomes an absolute must for those long takes and longer days. Two sided dampening on each rod softens Y axis translations such as the operators gait providing a more stable and usable...
Availability: On Backorder
$1,99999
QTY
Free Shipping
Part #: 100003MINIPOC

The Alan Gordon Enterprises Mini Director's Viewfinder is one of the lightest and most compact models of the Viewfinders sold through Alan Gordon Enterprises, Inc. Designed for the budget concious filmmaker & to meet today's requirements for both theatrical motion picture and television produc...
Part #: YSCC80

The Phototools 32" Camera Slider is approximately two and a half feet long and features three steel bearing rollers. The slider track incorporates three sets of 1/4"-20 and 3/8"-16 mounting holes, allowing you to support it in the center or at both ends. Two removable height adjustable legs...
Availability: In Stock
$9999
QTY
Free Shipping
Part #: 350634

This small, compact Matthews Dove Tail Camera Mount has been designed to allow simple and easy operation. Screw the bottom 1/4-20 male thread into the end of your Noga Arm by Matthews. The mount holds your camera with firm stability and features with quick release system to add or remove your...
Availability: On Backorder
$4299
QTY
Part #: 76

Unlock the full potential of your DJI Ronin-m with the D/Focus Systems D-Mount! This universal mounting plate allows you to mount your Ronin-m to a tripod, car, quadcopter, helicopter, drone, motorcycle, airplane, or anything else you can imagine. Simply mount the D|Mount Ronin-m to your object...
Availability: In Stock
$16499
QTY
Free Shipping
Part #: CIMODOB32

Say goodbye to cables, chargers, batteries, belts, and programming. Say hello to Modo. The Cinevate Modo Duzi Motion Timelapse System (32 In.) is affordable, effortless, and precise motion timelapse for the Duzi Slider. It's a module unique to the Duzi v3 carriage (original Duzi owners can upgrade their carriage...
Availability: On Backorder
$56900
QTY
Free Shipping
Part #: VASCSLLITE486

The Varavon Slidecam LITE 486 Camera Slider is the lightest roller bearing slider, it weighs only 1.2 kg. It is compact & made of strong Aluminum Alloy, chrome coated with special steel roller bearing. It is compact and easy to portable. It also has follow focus sling and is equally suitable for various...
Availability: On Backorder
$18500
QTY
Free Shipping
Part #: SUVTJ18

The SIRUI VTJ-1.8 Travel Jib provides creative height changes and following/panning capabilities not possible when your camera is at a fixed position. The VTJ-1.8's portability, flexibility and economy make it ideal for any shooting situation! The precision machining and high performance bearings...
Availability: In Stock
$59994
QTY
Free Shipping
Part #: AMA7SII

The Varavon Armor II Camera Cage for Sony a7S Standard Camera prepares your Sony a7S camera for video production work. For handheld shooting, a top handle in included, as well as a leather hand strap that attaches to the right side cage. With the camera in the cage, you still have access to...
Availability: On Backorder
$25925
QTY
Free Shipping
Part #: CDPLS01

The compact and portable Cerevo LiveShell USTREAM Compatible Device for Live Video Streaming is battery powered USTREAM compatible device. It streams live video to the Web without using a computer and also features HDMI, USB and composite AV interfaces, as well as a stereo microphone input. It...
Part #: AM-ZEUS A7R2 HANDLE

The Varavon Zeus Handle for a7R II is a modular Handle that provides excellent grip for handling the standard Zeus cage for video recording with the sony cameras. The handle features flexible mounting options for easy gripping and conversion of the cage according to shooting situation with 90...
Availability: On Backorder
$6000
QTY
Free Shipping
Part #: Z-C1002ER

The shoulder-mounted Zacuto C100 Mark II EVF Recoil includes our VCT Universal baseplate and the C100 Mark II Helmet. The Helmet allows for a secure connection between the camera body and the Canon top handle. It also gives you a 15mm rod port for the Axis Mini and multiple ΒΌ 20 screw holes for...
Availability: In Stock
$1,30000
QTY
Free Shipping
Part #: GLGVCSMK

The Genus GL GVCSMK Video Shoulder Mount is a shoulder support system that allows you to attach camera accessories with the help of adjustable 15mm rods. With the non-slip foam grips, an adjustable shoulder pad, and a counter weight, the mount ensures stable and efficient shooting. Compatible

...
Availability: In Stock
$94999
QTY
Part #: 525

Add essential mounting options and camera protection to your Canon 5D Mark III or 5D Mark II camera with the new D|Cage: 5D Mark III. The D/Focus Systems D|Cage for Canon 5D Mark III/5D Mark II Cameras is precision CNC machined from aluminum to create a sturdy, reliable exoskeleton for your Canon...
Availability: In Stock
$23999
QTY
Free Shipping
Part #: AM-ZEUS A7R2 ST

The Varavon Zeus Standard Cage for Sony a7R II, a7S II, & a7 II provides the added protection, stability, and accessory mounting options needed to prepare your Sony a7R II, a7S II, or a7 II camera for video production work. With the camera in the cage, you still have access to the SD card slot,...
Availability: On Backorder
$31200
QTY
Free Shipping
Part #: C12D9K1

The Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit with Video Head & Tripods is ideal for strength and lightweight support, the MoveOver12 includes two 100% 22mm carbon fiber rails. Flywheel with belt drive gives precise control with rubber track belt drive. The carriage operates using 4 quiet...
Availability: On Backorder
$1,54900
QTY
Part #: 810

The D/Focus Systems 1/4"-20 Accessory Mount for DJI Ronin-m is a CNC machined, aluminum mount that allows you to mount any 1/4-20 accessory on to your DJI Ronin-m Brushless Gimbal or any other 25mm diameter rod. Use it to mount a ball mount for an external monitor or anything else you might need...
Availability: In Stock
$4999
QTY
Free Shipping
Part #: CINHED000005

The Cinevate 60" Hedron Camera Slider is the culmination of years of customer input, product research and development. Hedron is a premium slider that delivers smooth slider shots, under extreme payloads, vertically or horizontally, manually or electronically, each and every time. In short, Hedron...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]