MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: HA6938P

  • Male PC to Male PC
  • Length 5 ft
  • Right Angle Tips
  • Black, Coiled Cord
Availability: In Stock
$1995
QTY
Part #: DL0423P

Converts hot shoe to PC (F). For cameras with no PC connection, but with hot shoe.
Availability: In Stock
$1495
QTY
Part #: DL0430P

The Dot Line DL-0430 is a 15 feet Male PC to Male PC Straight Flash Cord.
Availability: In Stock
$999
QTY
Part #: DL0432P

Male PC to Female PC flash cord. A black straight cord with 15 ft length.
Availability: In Stock
$999
QTY
Part #: DL0422P

Flash Cord, Male PC to Household.
Availability: In Stock
$799
QTY
Part #: DL0424P

Black coiled cord and right angle sockets.
Availability: In Stock
$749
QTY
Part #: HA6979P

  • Male PC to Female PC
  • Length 10 Meters (33 ft)
  • Black, Straight Cord
  • Right Angle Sockets
Part #: HA6975P

  • Male PC to Female PC
  • Length 5 Meter (16.5 ft)
  • Black, Straight Cord
  • Right Angle Sockets
Part #: 1001

This patented unit is designed to attach to a Transceiver and have the ability to mount on a light stand, tripod, etc... No more dangling on the end of a cord or using Velcro. Simply screw in the back of the Transceiver and use the bungee cord to secure it. This Caddy is an inexpensive way...
Part #: QR2

This Induro 2.4" QR2 Slide-In Quick Release Plate for DM-Series Heads is for use with the DM-series ballheads, this plate is compatible with the smaller DM-01 or DM-12 ballheads and it comes with a 1/4"-20 camera screw with non-skid strips.

Features:
  • Hi-profile design
  • Arca-Swiss style compatible
...
Availability: In Stock
$2700
QTY
Part #: 2225

The JTL Lighting Radio Trigger and Receiver Slave Set is designed for photographic studios and on-location work. It works at distance of 60 feet to 433MHz Frequency. It provides a remote transmission with low consumption. It is safe for all digital cameras. There are four possible combinations...
Part #: 2118

The JTL Lighting DigiFirer Radio Receiver is a digitized radio trigger system designed for photographic studios and on-location work. The receiver is attached to your light and accepts the signal from The Digifirer trigger. This receiver straps onto your light, with an included mini plug adapter...
Availability: In Stock
$3390
QTY
Part #: PMPWMH1
This Paramount 16" straight Household Male to Male Miniphone sync cord enables firing of a strobe head or power pack that accepts a male household style plug, from a Pocket Wizard Radio Slave Receiver or transceiver.
Availability: On Backorder
$2695
QTY
Part #: PMPWMPCF
The Paramount PW-MPCF Adapter is a molded piece that features a female PC tip on one side, and a mini-phone plug on the other side. This will allow a sync cord ending in a male PC tip to connect to equipment with a Monophone socket.
Availability: In Stock
$1995
QTY
Part #: PH17320

The Phottix N8 Extendable Spiral Cable for Select Nikon Kodak and Fuji Cameras (3.3 ft.) connects compatible Phottix products to Nikon, Kodak and Fuji cameras. It is high quality cable for connecting Phottix products such as Cleon II, Plato and Strato Series Flash triggers to cameras.

Features
...
Availability: In Stock
$995
QTY
Part #: PH17350

The Phottix C8 Extendable Spiral Cable for Select Canon EOS Cameras (3.3 ft.) connects compatible Phottix products to compatible Canon cameras. High quality cable for connecting Phottix products such as Cleon II, Plato and Strato Series Flash triggers to cameras.

Features:
  • Extendable to 1m
...
Availability: In Stock
$995
QTY
Part #: 804514

Motor drive cords connect to the camera's remote cable socket, and enable the Pocket Wizard radio slave to trigger the camera's shutter remotely. This pre-trigger cable is designed to keep the camera constantly "awake", and has the same effect as holding the camera's trigger button pressed down half-way. A...
Availability: In Stock
$9695
QTY
Free Shipping
Part #: 802451
The Pocket Wizard Flash Confirmation Cable indicates that a flash connected to your MultiMax Transceiver actually fired. By utilizing a shielded high intensity light sensor, which only remains active during the brief radio transmitting time, it confirms only if the attached flash fired or not....
Availability: In Stock
$7495
QTY
Free Shipping
Part #: 804513

Pocket Wizard Motor Drive Cords connect to the camera's remote cable socket, and enable your Pocket Wizard radio slave SET to trigger the camera's shutter remotely.

This pre-trigger cable is designed to keep the camera constantly "awake", and has the same effect as holding the camera's trigger...
Availability: In Stock
$6999
QTY
Part #: 804502

The PocketWizard Motor Drive Cable Canon EOS T3 Connector to Miniphone enable the PocketWizard radio slave to trigger the camera's shutter. This cable is 3' long.

Works With:
  • Canon EOS Rebel T3
Availability: In Stock
$6295
QTY
Free Shipping
Part #: 804105

120 Volt AC adapter for Pocket Wizard Plus receiver or transmitter. Enables uninterrupted, positive firing of slave receiver or transmitter.
Part #: 804414

Pocket Wizard Metz 45CL-1, 45CT/CL-3/4, 60CT-4 and G15/16 Power Grip to Miniphone Cable.
Part #: 804304

Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 10' straight PC to Miniphone Cable.
Availability: In Stock
$2595
QTY
Part #: 804608

The PocketWizar PW-DC-N10 Nikon DSLR Power Cable for MiniTT1 and Plus III Transmitters provides power to on-camera MiniTT1, Plus III, or MultiMAX directly from a Nikon camera's 10-pin remote terminal. It is compatible with any Nikon camera with a 10-pin remote shutter release terminal and MiniTT1...
Availability: In Stock
$1895
QTY
Part #: 804408

Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 16" straight Miniphone to Miniphone Cable.
Availability: In Stock
$1795
QTY
Part #: 804410
Electronic Flash and Motor Drive Cables for Canon T-3, Bronica 6X6 & 645, Hasselblad SCA 390 Module, Metz 32 CT, Z, MZ, 34 CS2, 40MZ, 50 MZ, 20BC-6, 28C-2, 54 MZ-3, 70 MZ-3 & 5 and Standard SCA Adapter.
Availability: In Stock
$1299
QTY
Part #: 804401

Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a wire connection to your power pack or monolight. This is a 10' straight Miniphone Male to Miniphone Female Extension Cable.
Availability: In Stock
$1295
QTY
Part #: FW59

Quantum's TTL adapters for FreeWire wireless transceivers let your camera control flash exposure without wires. For location portraiture (beach, desert, park, etc.) use wireless TTL when photographing subjects at longer distances, when TTL cables are not practical. For commercial photography mount...
Availability: In Stock
$10395
QTY
Free Shipping
Part #: 456

Quantum 456 Motor Drive Cord for Leica R3, R5, R6, R6-2, R7, RE compatible with 405, 505, 505i
Availability: In Stock
$9895