MAIL ORDER 800-321-4726
Scrims & Flags
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 169062

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: On Backorder
$4335
QTY
Part #: 999013

The Matthews 24x36" Lighting Control Kit includes 24x36" Single Scrim (Black), 24x36" Double Scrim, 24x36" Artificial Silk, 24x36" Flag, 24x36" Cello Cucoloris, 24x36" Wood Cucoloris and Carrying Bag. Lighting Control Carrying Bag is made of 1000 denier polyester fabric exterior shell with heavy...
Availability: On Backorder
$68000
QTY
Part #: 531650

Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

Arri makes four different types of scrims.

Full single- this scrim covers the entire lightface and reduces the intensity of the entire light beam.

Full double - this...
Availability: On Backorder
$1360
QTY
$21250
QTY
Free Shipping
Part #: 531652

Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

Arri makes four different types of scrims.

Full single- this scrim covers the entire lightface and reduces the intensity of the entire light beam.

Full double - this...
Availability: On Backorder
$1615
QTY
Part #: 169028B

Newly designed 90 degree Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new Matthews 48x48 In. Floppy Cutter Bottom Hinge (Opens to 48x90 In.), there are now three...
Availability: On Backorder
$14875
QTY
Part #: 149061

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: On Backorder
$5525
QTY
Free Shipping
Part #: 169067

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Part #: 159013

To keep weight to a minimum and yet get maximum strength, the Matthews 48x48 In. Solid Frame Scrim (Black Single) is made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames are black powder coated to minimize reflections. All Matthews Scrims & Flags are bordered with...
Part #: 999012

The Matthews Lighting Control Kit (18x24 In.) includes 18x24 inches Single Scrim (Black), 18x24 inches Double Scrim, 18x24 inches Artificial Silk, 18x24 inches Flag, 18x24 inches Cello Cucoloris, 18x24 inches Wood Cucoloris and Carrying Bag. Lighting Control Carrying Bag is made of 1000 denier...
Part #: 571716

This is a nylon storage bag with handles and velcro closure for protecting as many as 4 13" wire scrims. It's for the Arri 5KW Fresnel, Arrisun 12 Plus, Arrisun 40/25 Par, Compact HMI 2500/4000 and 2K, 5K Studio Fresnel, or any other manufacturers 13" scrims.
Part #: 531250

This scrim covers the entire lightface and reduces the intensity of the entire light beam.
Part #: FR154

This stainless steel, pop-in full single scrim for the Lowel Fren-L fixture reduces light by 50% (one f-stop) without diffusion or softening of contrast. It rotates 360°.
Part #: 571150

Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity. Full single scrim covers the entire lightface and reduces the intensity of the entire light beam.
Part #: 512253

Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

Arri makes four different types of scrims.

Full single- this scrim covers the entire lightface and reduces the intensity of the entire light beam.

Full double - this...
Part #: 530153

Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

Arri makes four different types of scrims.

Full single- this scrim covers the entire lightface and reduces the intensity of the entire light beam.

Full double - this...
Part #: 622005

The Matthews Combo Scrim and Flag Kit is a compact light-shaping kit that includes 18 x 24 inches and 24 x 36 inches light shaping scrims and flags of different thickness. The light scrims soften and diminish light output for professional requirements.

Features:
  • Scrims softens light output.
...
Part #: 169029

Cutters are square or rectangular frames with mounting pins attached used to control natural or artificial light. The Matthews 24x72 In. Floppy Cutter is used to keep away flash light from the camera lens or to control spill light coming from other sources and to keep light from reaching certain...
Part #: 169191

The Matthews RoadRags II Scrim Frame (24 x 36 In.) has an elastic corded frames easily fold for storing and transporting. It is the new portable lighting systems that allows to quickly and easily duplicate studio lighting effects on location using portable lights. It consists of two folding 18"x24"...
Part #: 999003

This Matthews Dot & Finger Survival Kit is a comprehensive kit able to solve almost any field or studio problem to Shape, soften or diminish the light from your fixtures. The Dot & Finger Survival Kit contains: 2--Dot 3 In. Single Black, 2--Dot 6 In. Single Black, 2--Dot 10 In. Single Black, 2--Dot...
Part #: D254

Full Scrim for DP Light Stainless steel screen reduces light one stop without diffusion or softening of contrast.
Part #: FR155

This stainless steel, pop-in half single scrim for the Lowel Fren-L fixture reduces light by 50% (one f-stop) without diffusion or softening of contrast. It rotates 360&deg. Full scrims dim the light across the entire beam spread, 1/2 and graduated scrims are used to even the beam spread when...
Part #: IP55H

Half Scrim with Swing-in Holder (iP-55H) Stainless steel wire mesh. Covers half the light and rotates 360 Degree(one f-stop). Will not diffuse or soften the light significantly. Includes
Part #: 0156

Clear, single and double screen areas gradually reduce light intensity. Compensates for light fall-off on walls and subjects. Rotates 360 degree.
Part #: D256

Clear, single and double screen areas gradually reduce light intensity. Compensates for light fall-off on walls and subjects
Part #: 169003

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Part #: 999027

Matthews Studio Equipment presents a new, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter ROADFLAGS offers larger surfaced, (4' x 4' - 122cm x 122cm) lighting modification in a convenient, easy-to-use protable kit. The...
Part #: 435200E

The Matthews Full Single Stainless Steel Diffusion - 6-5/8" is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at...
Part #: 445300E

The Matthews Full Single Stainless Steel Diffusion - 5" is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at the...
Part #: 999026

The Matthews RoadRags C-Vival Kit (18x24 In.) is specifically designed for the run and gun shooter who must move quickly and create studio quality images, this kit contains two (2) 40" Matthews C+, C-Stands, a RoadRags Kit which includes a single, double, silk and a flag and the convenient M

...
Part #: 169030

The Matthews Mini Meat Axe Flag (24x48 In.) is used to protect the camera lens from flares, controls spill light from other sources. The Meat Axe is primarily used on catwalks. It will clamp onto the handrail, although it may be used on pipe grids. The 72" arm is adjustable so it can pivot in...
Part #: 999006

Matthews Scrim and Flag Kit is all in one light-shaping kit with 18 x 24" and 24 x 36" light shaping scrims and flags. The Kit contains 18"x24" Flags, 18"x24" Single Black, 2--18"x24" Double, 18"x24" Artificial Silk, 18"x24" Wood Cucoloris, 24"x36" Wood Cucoloris, 18"x24" Cello Cucoloris, 24"x36"...
Part #: 571712

This is a nylon storage bag with handles and velcro closure for protecting as many as 4 7.75" wire scrims. It's for the Arri 2000, Compact HMI 1200 and 1000W Studio Fresnel, or any other manufacturers 7.75" scrims.
Availability: In Stock
$2975
QTY
$9395
QTY
Free Shipping
Part #: 149063

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
$5355
QTY
Free Shipping
Part #: 1957

The Westcott Fast Flags Scrim Kit (24x36 In.) is used to quickly diffuse light on set by 2 full stops. Shape or subtract light on set using this heavy-duty black block. A well-equipped Fast Flags Scrim Kit consists of an assortment of 24x36" light diminishing Flags and Diffusion Fabrics in a storage...
Availability: In Stock
$21000
QTY
Free Shipping
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]