MAIL ORDER 800-321-4726
Remote Transmitters & Slaves
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 27105

The Nikon’s WR-R10 Wireless Remote Controller Transceiver let you control key camera functions from a distance, even if there are objects between yourself and the camera. Compatible with specific Nikon D-SLRs, these devices allow control of autofocus, video recording, continuous shooting and silent...
Availability: On Backorder
$9995
QTY
Free Shipping
Part #: 27030

The Nikon MC-30A Remote Trigger Release allows for remote firing of a camera with trigger-lock function by keeping the shutter release button depressed (for Bulb shooting). The MC-30A has a 10-pin plug and works with any Nikon with a 10-pin remote port including the following Nikon DSLRs: D3,...
Availability: On Backorder
$6495
QTY
Free Shipping
Part #: 30004

The Ricoh CA-3 Remote Shutter Release For Theta Cameras is a cable switch to operate the camera shutter for GR Series cameras and Theta S. It works by attaching the USB cable with the compatible camera and the shutter button is located at the top of the device, which enables the user to operate...
Availability: On Backorder
$3995
QTY
Part #: 27106

The Nikon's WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set use radio frequencies to communicate; by pairing together a WR-T10 and one or more WR-R10 units. The WR-A10 WR Adapter is designed to work with the WR-R10 Wireless Remote Controller (transceiver), allowing it to be connected to select...
Availability: On Backorder
$17999
QTY
Free Shipping
Part #: 27103

The Nikon WR-A10 Wireless Remote Adapter is designed to work with the WR-R10 Wireless Remote Controller (transceiver), allowing it to be connected to select Nikon D-SLRs with a 10 pin connector, to wirelessly control the shutter release. The WR-T10/WR-R10 + WR-A10 Wireless Remote Adapter units...
Availability: On Backorder
$5994
QTY
Free Shipping
Part #: RSRT04C3


This RS-RT04/C3 RF Remote Release from RPS is a wireless radio remote that works with Canon EOS 7D, 5D, 5D Mark II, 10D, 20D, 30D, 40D & 50D digital cameras and similar cameras which use a 3-pin connector. It consists of two parts; a receiver/trigger that connects to the camera's cable release

...
Availability: On Backorder
$4789
QTY
Part #: 901031

Control the shoot from the palm of your hand.

The standard Air Remote can be used to wirelessly sync and control your Profoto Off-Camera Flash from any camera that has a hot shoe.

Unlike the Air Remote TTL-C (for Canon) and the Air Remote TTL-N (for Nikon), the Air Remote does not provide

...
Availability: On Backorder
$31100
QTY
Free Shipping
Part #: RSRT04N10

This unit allows the photographer to be away from the camera, yet take pictures, even when there are obstacles (walls, etc.) between him or her and the camera. This wireless shutter release activates the auto focus and the automatic meter systems of the camera and then trips the shutter just as...
Availability: On Backorder
$7495
QTY
Free Shipping
Part #: PMPWMH1
This Paramount 16" straight Household Male to Male Miniphone sync cord enables firing of a strobe head or power pack that accepts a male household style plug, from a Pocket Wizard Radio Slave Receiver or transceiver.
Availability: On Backorder
$2695
QTY
Part #: FIX30329

The Fisheye FIX Neo Remote Controller is used to mount on your housing or handle to easily adjust your Fix Neo light output. Two lights may be controlled simultaneously or individually with this remote and requires one fiber optic cable for each Fix Neo light.
Availability: On Backorder
$19900
QTY
Free Shipping
Part #: EL19371

The Large LCD display of the Elinchrom EL-Skyport Transmitter Plus HS for Sony features two-way control via a visual feedback interface that lets you see the exact power up to 10 compatible Elinchrom lights in your setup right on the transmitter. Users can control the modelling lamp and power...
Availability: On Backorder
$24995
QTY
Free Shipping
Part #: 907011

The Photogenic MRT16 Remote Controller for Photogenic Matrix MCD400R (16-Channel) is specially designed for use with Matrix MCD400R 400Ws Monolight. It is used to wirelessly trigger your Matrix MCD400R monolight that features a strong 2.4 GHz radio frequency for non-line-of-sight operation and...
Part #: TWINLINK

The Seculine TwinLink T2D Wireless Flash Trigger Set provides an economical and efficient way to wirelessly trigger both studio and camera flash systems. It slides onto the hot shoe mount of your camera and receives the shutter signal directly from the built in connector. If you need to use it...
Part #: R4C

The Interfit Twin-1 R3-TRC Infrared Remote for Canon is able to trigger your camera's shutter from up to 300' (91.4 m) away with the added capability to operate a delayed shutter release, and also supports half shutter depress for pre-focusing and other camera functions. It is ideal for studio...
Part #: MVR911ECCN

 The Manfrotto SYMPLA Clamp-On Remote Control for Canon DSLRs connects to a Canon DSLR by USB and interfaces directly with the camera and lens firmware to control focus operations and the main functions of the camera. The remote can either be clamped onto the SYMPLA spacer that comes with SYMPLA...
Part #: 940040

Batteryless, pulse light slaves are the handiest available.

Simply slide them onto flash hot shoe, and that's it. Or attach PC cord from flash to slave's PC terminal. Surround-sync design ensures omnidirectional performance. Slaves are cast in plastic for incredible durability and integrated

...
Part #: 3950

With only 3V of voltage, the transmitter offers unquestionably the safest mode of operation for all digital cameras. It connects either to the direct X-contact or the sync socket of the camera. The transmitter itself is active only at the moment it is triggered, which means that the electrical...
Part #: 958394

The Photogenic PLIRC-2 kit is an economical way to control two "DR" light units. The kit includes the PLIRC-1 hand held controller, two (2) PLDIR-2 receiver units and two (2) adjustable mounting arms. The infrared remote control feature allows changes to be transmitted to up to 9 light units...
Part #: MVR901ECLA

The Manfrotto Remote Control LANC for Canon & Sony Cameras can be clamped onto round tubes with 0.47-0.9" (12-23 mm) diameters using a quick-lock fastening clamp. It can be easily attached to a pan bar. With efficient quick lock and speed controls, the unit enables quick camera set up. A max-speed...
Part #: 2225

The JTL Lighting Radio Trigger and Receiver Slave Set is designed for photographic studios and on-location work. It works at distance of 60 feet to 433MHz Frequency. It provides a remote transmission with low consumption. It is safe for all digital cameras. There are four possible combinations...
Part #: EL19374

Adapter for connecting the Skyport Transceiver to the Elinchrom Ranger RX packs.
Part #: B3613100

Radio transceiver with 10 digitally coded channels for wireless remote control and flash triggering of the broncolor flash units containing an integrated RFS interface, from a PC or Macintosh computer. It has a dialogue function, that means, manual settings on the unit are automatically adjusted...
Part #: 804105

120 Volt AC adapter for Pocket Wizard Plus receiver or transmitter. Enables uninterrupted, positive firing of slave receiver or transmitter.
Part #: 804414

Pocket Wizard Metz 45CL-1, 45CT/CL-3/4, 60CT-4 and G15/16 Power Grip to Miniphone Cable.
Part #: FW11

Uni-Mod Universal connector module with hot shoe and female household connector
Use with standard household to PC sync cord.
Part #: 930010

Batteryless, pulse-light slaves are the finest and most responsive light triggering devices available. Sensitivity is such that outdoor range is up to 1/2 mile using 1/4 power setting of a Vivitar 283. Surround-sync design ensures omnidirectional performance. With "H"-prong and PC terminals for...
Part #: EL19353

The EL Skyport RX Receiver works only with any Elinchrom RX monoblocs or packs and is designed to send and receive signals from the Skyport Transmitter and Skyport USB RX Transceiver. No battery is required as the unit gets its power from the device it's plugged into. To control the flash power,...
Part #: 467

Quantum 467 Motor Drive Cord for Mamiya 645AF compatible with 405, 505, 505i. Motor drive cords connect to the camera's remote cable socket, and enables a Quantum Radio Slave or FreeXwire unit to trigger the camera's shutter. This cable will trigger the Mamiya 645AF camera.
Part #: 919235

Two products in one, this is a wireless signal receiver and a digital display. Transmitted commands are communicated to the receiver at the light and adjustments are confirmed by changes in the digital display. This is an ideal accessory for lights placed on the ceiling, up on a tall stand...
Part #: RSRT04D90

This unit allows the photographer to be away from the camera, yet take pictures, even when there are obstacles (walls, etc.) between him or her and the camera. This wireless shutter release activates the auto focus and the automatic meter systems of the camera and then trips the shutter just as...
Part #: 1001

This patented unit is designed to attach to a Transceiver and have the ability to mount on a light stand, tripod, etc... No more dangling on the end of a cord or using Velcro. Simply screw in the back of the Transceiver and use the bungee cord to secure it. This Caddy is an inexpensive way...
Part #: QF91C
With the Quantum Instruments CoPilot Wireless TTL Flash Controller for Canon you can control a studio full of flashes from up to 300' away from the hotshoe of your Canon DSLR. Not only will the CoPilot trigger them but can adjust the lighting ratios of up to 3 independent groups of flashes. Instead...
Part #: 907010

The Photogenic MRT-16 Wireless Transmitter is specially designed for use with Matrix MCD400R Monolight. It is used to wirelessly trigger your Matrix MCD400R monolight that features a strong 2.4 GHz radio frequency for non-line-of-sight operation and offers 16 channels for minimizing interference...
Part #: PWPLUSXFCC2

The PocketWizard PlusX 2 Pack is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System.

How simple? Attach one PlusX to your camera, another PlusX to a remote flash using an included cable, set both radios to the same channel and start taking pictures....
Availability: In Stock
$16900
QTY
Free Shipping
Part #: PH89230

The Phottix Ares Wireless Transmitter/Receiver Flash Trigger Set (Black) is a simple way to use off-camera flash. The 8-channel transmitter and receiver units have a range of 200m and feature a "fire-all" channel function. No advanced bells or whistles - simple, reliable and affordable radio flash...
Availability: In Stock
$5495
QTY
Free Shipping
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]