MAIL ORDER 800-321-4726
Panel Frames Connectors & Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: RS2003

This heavy duty 3-section one piece crossbar features twist locks to allow continuous adjustment from 4 feet to 10 feet. Just turn the section counterclockwise to release, extend to the length desired and then turn clockwise to lock in place. Features locking screws for a secure fit to user's...
Availability: On Backorder
$3695
QTY
Part #: 549120

The flat edges of the Matthews 48x48 In. Diffusion Frame (Knife Blade) make it ideal for quick gel changes with 2 sided tapes. It does not require removing the frame for replacing the gel.

Features:
  • Easy and quick removal of gel
  • Flat edges for sticking double sided tape
Availability: On Backorder
$8500
QTY
Part #: 549099

The Matthews Diffusion Frame - 36 x 36" - 3/4" Square Tubing has flat edges which make them ideal for quick gel changes with 2 sided tape.
Availability: On Backorder
$7895
QTY
Free Shipping
Part #: 409312

Matthews now offers the Snap-A-Part frames for easy handling and storage. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting truck. Snap-A-Part frames come in both light and heavy duty 1" square tubing. The Matthews Butterfly Overhead Snap-A-Part Light Duty Frame...
Part #: 2022

The Westcott Scrim Jim Cine Frame Tube (46 In.) is a complete modular system designed to bounce, block, diffuse, subtract, and shape light. This system's durable, lightweight frames are designed to configure in sizes from 1'x 1' up to 8' x 8'. Frame pieces vary in size from 10" tubes and upward,...
Part #: 1897

The Westcott Scrim Jim Cine Frame Set (4 x 4 ft.) is a complete modular framework designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control system, giving users the ability to build and create whatever tool they need for whatever lighting they encounter. This...
Part #: 409100-3

The Matthews Frame Part Quick Reverse Ear for 1 In. Square Tube is the strongest, most versatile way of suspending an overhead frame. The ears are guaranteed to provide a fast and efficient way to flip the frame allowing two rags to be tied off to the frame, one on either side. Flip from bounce...
Part #: 1889

The Westcott Scrim Jim Cine Frame Set (2 x 2 ft.) is a complete modular frame system designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control tool and acts as the superior mounting system for Flex LED mats. This 2' x 2' Scrim Jim Cine frame includes four 22"...
Part #: 409308

The Matthews Butterfly Overhead Snap-A-Part Frame (8x8 ft.) is for easy handling and storage. It features the Quick Reverse Ear which will enable the removal and reversal for quick 180 degrees frame repositioning. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting...
Part #: 2091

This Westcott Scrim Jim Cine Swing Hinge Corner Frame Connector can be used to connect any four Scrim Jim Cine Frame Tubes, for building adjustable book lights and v-flats. Featuring a durable construction, this connector includes a built-in positive-locking button to ensure that Scrim Jim Cine...
Part #: 2000

The Westcott Scrim Jim Cine Frame Tube (10 In.) is a complete modular system designed to bounce, block, diffuse, subtract, and shape light. This 10" Scrim Jim Cine Tube can be used in combination with other tubes and various Scrim Jim Cine connectors and fabrics to create flat frames, diffusion...
Part #: 2020

The Westcott Scrim Jim Cine Frame Tube (22 In.) is a complete modular system designed to bounce, block, diffuse, subtract, and shape light. This 22" Scrim Jim Cine Tube can be used in combination with other tubes and various Scrim Jim Cine connectors and fabrics to create flat frames, diffusion...
Part #: 2023

This Westcott Scrim Jim Cine 2 In. Straight Frame Connector can be used to connect any two Scrim Jim Cine Frame Tubes. Featuring a durable construction, this connector includes a built-in positive-locking button to ensure that Scrim Jim Cine Frames will stay connected throughout long shoots. The...
Part #: 1885

The Westcott Scrim Jim Cine Frame Set (1 x 1 ft.) is a complete modular frame system designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control tool and acts as the superior mounting system for Flex LED mats. This 1' x 1' Scrim Jim Cine frame includes four 10"...
Part #: 1887

The Westcott Scrim Jim Cine Frame Set (1 x 3 ft.) is a complete modular frame system designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control tool and acts as the superior mounting system for Flex LED mats. This 1’ x 3’ Scrim Jim Cine frame includes four 10” heavy-duty tubes, two 22...
Part #: C150155STK2

The California Sunbounce SunSwatter Mini 2/3 Translucent Starter Kit is a Mini Pro Kit with 2/3 Stop Translucent Screen that is great core diffusion system. The lightweight, high tensile-strength frame sets up and breaks down in seconds. The starter kit 2/3 stop diffusion screen allows reducing...
$40376
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: H600M

Heavy duty 3mm square section tubes-slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes you can create any frame size.
Part #: 409306

All Snap-A-Part Frames 8'x8' and larger, feature the "Quick Reverse Ear" which will enable the removal and reversal for quick 180deg. frame repositioning.
Part #: VB-1345

The LimeLite Studiolite Gel Filter Frame for SL455DMX fluorescent fixture is a lightweight frame with clips to hold filters cut to the size of fixture and it slips into the accessory channel in front of the SL455DMX.

Features:
  • Slips into Accessory Slot
  • Clips for Filters
Part #: LPA39CB

The Photoflex Crossbar improves the stability of your Litepanel frame. This easy clip-on accessory prevents the frame from bowing, which can occur when the frame is used above the subject, or tilted at an angle.
Part #: H1200M

Heavy duty 3mm square section tubes-slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes you can create any frame size.
Part #: 119726

These honeycomb Reflectors are 75% lighter in weight than the Standard Reflectors, measuring 40"x40" and costing considerably less. Three different Reflectors are available. The Standard Matthboard features a "hard" side and a "soft" side. In addition, the Silver Fill Matthboard offers a "super...
Part #: 119728

These honeycomb reflectors are 75% lighter in weight than the standard reflectors, measure 40" x 40", and cost considerably less. The Silver Fill Matthboard offers a "super soft" side and an "ultra soft" side. The "super soft" is made only with Matthews' material.
Part #: 409712

All-Snap-A-Part Frames 8'x8' and larger, feature the "Quick Reverse Ear" which will enable the removal and reversal for uick 180deg. frame repositioning.
Part #: 319651

Matthews offers a wide variety of Corners, Connectors, Ears, and Pins to create your own Overhead Frame on the go. As part of the design, the Matthews Ear for 1.25 In. Pipe fits over all for 1-1/4" Pipe. Use a Large Grip Head to secure it to a Jr. Combo Stand. It is gusseted for maximum strength....
Part #: 409112

The Matthews 12x12 ft. Butterfly Overhead Hollywood Frame is made of 1 inch thick, hollow square tubing. This strong square tubing insures steady support for the choice of light-shaping materials. Matthews offers a wide variety of frames to hold your overheads and butterflies.

Features:
  • One
...
Part #: 539189

To keep weight to a minimum and yet get maximum strength, the Matthews 48x48 In. Flag Frame is made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames are black powder coated to minimize reflections. All Matthews Scrims & Flags are bordered with heavy duty color coded...
Part #: 319640

The Matthews Corner Frame Part for 1-1/4 In. Pipe is a 90 degrees bent corner for joining the frame pipes. The corner has two studs for secure joint with holes and a hook to easily handle the accessory. It is highly useful to create your own Overhead Frame on the go.
Part #: 539284

The Matthews Flag Frame - 24x36 In. is wonderful and good quality frame by Matthews. Mathews have large variety of products available in market. Mathews newly designed 90° Flag frames with mounting pins attached, will make it possible to position the instrument over the top of the set wall or...
Part #: C-200-092

SunBounce’s unique system is secured with Sunbounce 22mm Self-Securing Pins for Sunbouncer and Sun-Swatters (4 Pack). During a shooting you should always have a few spare SELF-SECURING PINS on hand - you never know. The SSPS are structural components of the SunBounce system’s frame construction....
Part #: C-1MM-000

This patented, three-dimensional and collapsible Sunbounce Frame is super light and extremely stable. The modular system allows you to combine every frame with the appropriate screen, making it a reflector, diffuser, or light blocker (shade). These special frames, made by hand from anodized al...
Part #: B309071

Matthews now offers the Snap-A-Part frames for easy handling and storage. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting truck. Snap-A-Part frames come in both light and heavy duty 1" square tubing. The Matthews Butterfly Overhead Snap-A-Part Light Duty Frame...
Part #: 2024

This Westcott Scrim Jim Cine 2D Corner Frame Connector can be used to connect any two Scrim Jim Cine Frame Tubes. Featuring a durable construction, this connector includes a built-in positive-locking button to ensure that Scrim Jim Cine Frames will stay connected throughout long shoots. The Scrim...
Part #: 1834

The Westcott Scrim Jim Cine Frame Set (8 x 8 ft.) is a complete modular framework designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control system, giving users the ability to build and create whatever tool they need for whatever lighting they encounter. This...
Part #: 1820

The Westcott Scrim Jim Cine Frame Set (4 x 6 ft.) is a complete modular framework designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control system, giving users the ability to build and create whatever tool they need for whatever lighting they encounter. This...
Availability: In Stock
$24990
QTY
Free Shipping
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]