MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: MINIFURLAV

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.
Availability: In Stock
$2499
QTY
Part #: MICROBOOMPOLE

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
$4900
QTY
Free Shipping
Part #: KTADL

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$10925
QTY
Free Shipping
Part #: AMCCC301

The GoPro 3.5mm Mic Adapter lets you connect any external 3.5mm microphone to your HERO 3 camera.

Compatibilty: GoPro HERO 3 cameras only
Availability: In Stock
$1999
QTY
Part #: DEADCATGO

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
$2995
QTY
Part #: 1097BK

The Calrad Lavalier Clasp-type Microphone Holder is a Tie Clip microphone holder that fits 7/32 inches diameter microphones.

Lavalier Clasp-type Microphone Holders are used for hand free performance.
Availability: In Stock
$599
QTY
Part #: RB200

The Riggy Cold Shoe Top Mounting Kit by its manufacturer JuicedLink, is an entire kit with everything you need to mount your Riggy-Micro to the hot-shoe of your camera (not designed for the Riggy-Assist). It inlcludes 2 RB101 cold shoe mounts which attach to the Riggy receptacles on the top and...
Availability: In Stock
$4900
QTY
Free Shipping
Part #: MICONCABLE3M

This Rode MiCon Cable measures 10' (3m) in length and is intended for use with the Rode HS1 headset microphone and Rode Lavalier microphone. The cable offers extended range, adapts to any of the available MiCon adapters and is ideal for use with bodypacks or hardwired applications alike.
Availability: In Stock
$3900
QTY
Part #: 3013

The Dinkum Systems FlexiMount is a quick-clamping microphone mount with a strong base and 9-link, 11” long arm, which may be accurately positioned for optimum audio results. It’s the perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go po...
Availability: In Stock
$4945
QTY
Free Shipping
Part #: WS7

The Rode WS7 Deluxe Wind Screen provides excellent noise protection against high wind and adverse weather conditions.

The slip-on design of the WS7 features dimensions that accommodate the Rode NTG2 and NTG1 microphones; as well as any shotgun or stereo mic with a length of 7.25" (186.5mm) and...
Availability: In Stock
$5900
QTY
Free Shipping
Part #: BLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun microphones up to 325mm (12 &fr
...
Availability: In Stock
$29900
QTY
Free Shipping
Part #: MICROBOOMPOLEPRO

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
$9900
QTY
Free Shipping
Part #: 10-31

The Calrad Chrome Plated Microphone Stand is a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The...
Availability: In Stock
$3199
QTY
Part #: WMS-PRO + I

Azden's most popular DSLR audio products are now compatible with Smartphones and Tablets! The Azden WMS-PRO+I VHF Wireless Lavalier and Handheld Mic System includes a new interface cable making it compatible with any mobile device with a TRRS jack. Record great wireless audio into your iPhone®...
Availability: In Stock
$18500
QTY
Free Shipping
Part #: INVISILAV3PK

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
$1800
QTY
Part #: 173B

This Manfrotto Mini-Boom Arm it has a 20mm diameter, is manufactured of aluminum and features a black finish. It has a length just under 43". It is also lightweight at only .71 lbs.

Features:
  • Diameter: 20mm 
  • color: black color
  • length: 42.91 in
  • material: aluminum 
...
Part #: MZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
$3895
QTY
Part #: 1033

The Calrad Collapsible Microphone 3 Leg Stand is polished chrome plated or black finish stem with 3/8 inches - 16 thread connector and a detachable 5/8" - 27 screw adapter for microphone holder. 3 leg base with fold able tubular legs. Boom sets accessories included with stand for greater adjustment...
Availability: In Stock
$5999
QTY
Free Shipping
Part #: RB101

The Riggy Cold Shoe Attachment by its manufacturer JuicedLink. The RB101 is a SINGLE cold shoe attachment that can be mounted to the Riggy receptacles located on either the top or side of the Riggy-Micro series of preamps (not for the Riggy-Assist series of preamps). The Riggy-Micro preamps are so...
Availability: In Stock
$2500
QTY
Part #: MCC2

The BeachTek 2-Channel Audio Adapter and Bracket is a two-channel, audio adapter / bracket combo that lets you mount, connect and control two audio devices for camcorders or DSLR cameras. This adapter is designed to easily attach wireless mics and small, self powered, camera mounted microphones...
Part #: WSHS1B

The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-B is supplied as a pack of three.
Part #: 528117

This Sennheiser Foam Windscreen replaces the windscreen included with the MKE400 microphone.

Please note: Microphone not included
Availability: On Backorder
$995
QTY
Part #: APH6

The Zoom APH-6 Accessory Pack for the Zoom H6 Handy Digital Recorder includes a windscreen that provides a professional level of wind noise prevention, a remote controller with REC, PLAY, STOP and other functions and an USB-type AC power adapter.

Features:
  • Wired Remote Controller
  • Hairy Win
...
Availability: In Stock
$5999
QTY
Free Shipping
Part #: SMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
$2995
QTY
Part #: MICON6

The Rode MiCon 6 Connector is an adapter intended to connect the Rode HS1 headset, PinMic and lavalier microphones to AKG wireless bodypack transmitters. The MiCon 6 features a mini 3-pin female connector that is compatible with the AKG PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000 bodypacks.
Availability: In Stock
$2300
QTY
Part #: SG200

SG-200 Windscreen with 1" Inside Diameter. Will fit Sony BVW-200, BVW-300, BVW-400 and BVW-D600 Betacam Microphones.
Availability: In Stock
$2695
QTY
Part #: 037303

This Hot Shoe Extension allows you to fit multiple attachments to your single hot shoe and also allows you to rotate the attachment 360 degree around the shoe fixture on the camera.
Availability: On Backorder
$2795
QTY
Part #: 1097

The Calrad Lavalier Clasp-type Microphone Holder is a microphone clip holder (Tie Clip) that fits 7/32 inches diameter microphones. Lavalier Clasp-type Microphone Holder is used for hand free performance.
Availability: In Stock
$599
QTY
Part #: SM6

The Rode's SM6 Shock Mount with Detachable Pop Filter is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes a removable pop shield...
Part #: SM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock
$4995
QTY
Free Shipping
Part #: SKP100G3

The Sennheiser SKP 100 G3 Plug-on Transmitter for Dynamic Microphones (516 - 558MHz) easily plugs onto microphones with XLR connections transforming them into world-class wireless units when combined with EM 100 G3 or EK 100 G3 receivers. This compact and lightweight transmitter has a run-time...
Part #: MZH600

For outside broadcasting - a combined foam windshield and hairy cover that reduces wind noise most effectively. The Sennheiser MZH 600 Windshield is an accessory for the MKE 600 shotgun mic. The MZH 600 Windshield features a combination of foam and faux fur that diffuses wind noise during outdoor...
Availability: In Stock
$6995
QTY
Free Shipping
Part #: SMBND

These Rode Silicone Replacement Bands are used for replacing worn or damaged bands on the Rode SM3, SM4 and SM5 shockmounts.
Availability: In Stock
$799
QTY
Part #: PSCSHOCKMOUNT

Designed to provide stable and noise free handling for a wide variety of microphones. These shock mounts feature a compact, concise design. They are constructed of lightweight aircraft aluminum and have a non-reflective black anodize finish. The two suspension bands are custom made to our own...
Availability: In Stock
$7995
QTY
Free Shipping
Part #: MINIBOOMPOLE

The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source.

  • lightweight aluminium con

...
Availability: In Stock
$12900
QTY
Free Shipping
Part #: WS58

This BeyerDynamic product is the wind screen for the M 58 microphone, charcoal-gray.
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]