MAIL ORDER 800-321-4726
Light Stands & Grip Equipment
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 25LB

The Saddle Sandbag 25 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:

  • Outer shell is water resistant, heavy duty cordura nylon, inner shell is polypropylene.
  • Handles on
...
Availability: In Stock
$2995
QTY
Part #: 756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: On Backorder
$15895
QTY
Free Shipping
Part #: B756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: In Stock
$15895
QTY
Free Shipping
Part #: 350626

The Matthews 10.5 In. Superflex NOGA Articulating Arm is 10.5 inch (26.6cm) long at full extension and will support a weight of 13.2lbs (6kg) at full extension. It is articulated, multi-jointed arms that are the strongest and most versatile yet in the industry, offering many more features and...
Availability: In Stock
$14450
QTY
Free Shipping
Part #: 1004BAC

This 12' Aluminum Master Stand (Black) lightweight construction and compact-size of this stand make it a practical tool for your lighting support needs. With a patented Quick Stack System (QSS) you can easily stack the stands together with their built in connectors for portable transport and s...
Availability: In Stock
$11488
QTY
Free Shipping
Part #: 756140


This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design...
Availability: In Stock
$19550
QTY
Free Shipping
Part #: 756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: On Backorder
$15895
QTY
Free Shipping
Part #: A5029

This 9 ft 10 in double riser light stand features a low profile base that slips easily into position on set. It is supplied with wheels and positive brakes.
Availability: In Stock
$25088
QTY
Free Shipping
Part #: 15LB

The Saddle Sandbag 15 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:
  • Outer shell is water resistant, heavy duty cordura nylon, inner shell is polypropylene.
  • Handles on
...
Availability: In Stock
$2195
QTY
Part #: H386022

Junior & Senior Stands: Designed for larger lighting fixtures these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1 1/8" Posi-V-Lock female with pop up 5/8" male receiver....
Availability: On Backorder
$32725
QTY
Free Shipping
Part #: D200

Avenger's most popular grip accessory. The D200 Grip Head has hundreds of functions. Unlike any other grip head, the D200 utilizes a series of washers for extra locking torque and the use of automotive-quality brake pad discs for secure, non-slip security.
Availability: In Stock
$2888
QTY
Part #: RS1130

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
$6995
QTY
Free Shipping
Part #: B387490

Designed primarily for use in lighting kits, this stand is compact and light weight. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures. This is a triple riser stand, for reaching a maximum height...
Availability: In Stock
$16745
QTY
Free Shipping
Part #: YLS2000C

The Phototools Retractable Light Stand is an aluminum stand with four sections that lock into place via durable twist locks. The stand extends to a maximum height of 6.2' and folds down to 19". This light stand can support weight up to 3.3 pounds and when broken down, it weighs about 2 pounds
...
Availability: In Stock
$4999
QTY
Free Shipping
Part #: 427801

Similar in construction to the Mini Boom this boom utilizes a much heavier duty tilt locking device and can be mounted on a stand with either a Junior Receiver or a Baby Pin.
Availability: In Stock
$23885
QTY
Free Shipping
Part #: DS-013

The Savage Drop Stand Light Stand (13 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
Availability: In Stock
$10899
QTY
Free Shipping
Part #: H386020

The Matthews Hollywood Baby Jr. Triple Riser Stand is very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews...
Availability: In Stock
$29750
QTY
Free Shipping
Part #: 350616

The Matthews Smart Phone Adapter allows you to mount smart phones to Matthews MicroGrip 3/8" rods or clamps. Using the MicroClamp, you can then affix the setup to anything with a diameter up to 1.75".
Availability: In Stock
$4895
QTY
Part #: 350605

MICRO Shot Bag used to counterbalance weight in Matthews MICROgrip line of gear.
Availability: In Stock
$1495
QTY
Part #: H377573

Roller Stands or Overhead Stands as they are often called utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios these stands feature wide bases for stability and terminate in the new 4 .5" Grip Head. Both the Hi-Hi...
Availability: In Stock
$40715
QTY
Free Shipping
Part #: 427803

The largest and heaviest duty Matthews Junior Boom (5.6-10 ft.) measures 68 inches (172cm) when fully collapsed and will extend to over 10 feet (300cm). The Junior Boom has a 25-pound (12kg) counter-balance weight attached and features the same tilt-locking and mounting mechanism found on the...
Availability: In Stock
$35870
QTY
Free Shipping
Part #: 350634

This small, compact Matthews Dove Tail Camera Mount has been designed to allow simple and easy operation. Screw the bottom 1/4-20 male thread into the end of your Noga Arm by Matthews. The mount holds your camera with firm stability and features with quick release system to add or remove your...
Availability: On Backorder
$4299
QTY
Part #: 350584
Availability: In Stock
$2380
QTY
Part #: A10

The Aputure A10 Articulating Magic Arm is a 10 inch multi-function magic arm, which features a hyper-stable and reliable locking system. It can be easily locked at all joint activities and fix in more position. The locking a10 can help you to experience a hyper-stable, but flexible support system....
Availability: On Backorder
$4900
QTY
Free Shipping
Part #: RS3138P

The new RPS Studio Light Stand Adapter 1/4-20 to 3/8 Inch Dual Male Spigot is solid brass featuring 2 male 1/4-20 threads and can be mounted via any 5/8 inch receiver. Total length is 1-9/16 inches.

Availability: On Backorder
$995
QTY
Part #: SHOTBAG2

The STUFFT 2 lb Shot Bag is made of ballistic nylon fabric shot encapsulated in inner poly bag embroidered with "shot" and weight in pounds custom embroidery. The bag is used to stabilize light stands or set walls.
Availability: In Stock
$1495
QTY
Part #: 429042

Of Amish design... Also known as the Quacker Clamp or Duck Bill. This clamp is ideal for positioning foam core or bead board.
Availability: In Stock
$8925
QTY
Free Shipping
Part #: 244MINI

The Manfrotto 244MINI Friction Arm is a versatile 24cm (9.4 ") friction arm with 1 /4" attachments on both ends and additional 3/8'' adapter included. Attachments can easily be replaced by using the included hex key and are compatible with a range of different adapters.

Features:
  • Versatile
...
Availability: In Stock
$10988
QTY
Free Shipping
Part #: B387486

The Matthews Reverse Stand is best suited for location work, since it can fold back on itself into a very compact package only 22.75" (58 cm) long. It has four risers, and its maximum height is 83.5" (2.1 m).

It can accommodate 11 lbs (5 kg) at maximum height.
Availability: In Stock
$7480
QTY
Free Shipping
Part #: 299886

This versatile, stainless steel shot bag quickly wraps around the base of any stand column, brace, tee handle, arm or boom. By placing the weight directly below the weight of the fixture, the weight is actually directed straight down the stand's vertical column, holding it firmly in place. The...
Availability: In Stock
$3315
QTY
Part #: 100P

The Westcott Photo Basics "Just Add Lights" Bundle includes a 10'x10' white background, a 45" silver umbrella, 43" white umbrella, a 6.5' light stands and a lightweight black light stand.

 Photo Basics "Just Add Lights" Bundle, it contains everything you'll need for portraiture or group pho

...
Availability: In Stock
$7999
QTY
Part #: 417026

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common use is for camera shots...
Availability: In Stock
$5499
QTY
Free Shipping
Part #: 429232

90 degree pin / receiver. Weighs .9 pounds.
Availability: In Stock
$3095
QTY
Part #: KG602512

The Kupo Baby Drop Down Pin is a male to female 5/8” baby pin adapter with variable angle adjustment used to attach an Avenger F800 3-Inch Baby Wall Plate for mounting a video light. The pivoting pin allows a light with a reflector or softbox to maintain a horizontal position regardless of the...
Availability: In Stock
$2625
QTY
Part #: SHOTBAG5

The STUFFT 5 lb Shot Bag is made of ballistic nylon fabric shot encapsulated in inner poly bag embroidered with "shot" and weight in pounds custom embroidery. The bag is used to stabilize light stands or set walls.
Availability: In Stock
$2495
QTY
Part #: YA024

The Phototools Stand Adapter allows you to convert a Junior 1-1/8 inch female receptor to a standard 5/8 inch male stud.
Availability: In Stock
$1599
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]