MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 025BSL

The Manfrotto Black Super Boom features coaxial geared controls at the end of the boom, which permits movement a full 180&deg. It extends to 8.8' (2.7 m). This item replaces old catalog #3391 (BO3091B). It is a boom only

FEATURES:

  • Dual cranks provide remote control over fixture pan
...
Availability: On Backorder
$42988
QTY
Free Shipping
Part #: 429626-5

The Matthews GoPro Mount Accessory Tip for Infinity Arm is specifically designed for Infinity Arm to increase the accessories attaching capabilities. It mounts to either end of the Infinity Arm, increasing its versatility and mounting options.

Features:
  • Specifically designed for Infinity Arm
...
Availability: In Stock
$4900
QTY
Free Shipping
Part #: D700B

Positions and holds reflector for hands free use.
Availability: On Backorder
$5688
QTY
Free Shipping
Part #: 101074

The Profoto Stand Adapter Plus 16mm /5/8 inch is useful adapter to mount head on the stands for shooting. the adapter is made with high quality material and could be used on stands with ease.
Availability: In Stock
$4100
QTY
Part #: 350602-11

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$800
QTY
Part #: 350602-8

The Matthews MICROgrip Rod (12 In.) are used to create a highly flexible mount that will allow the photographer to get the on-camera light up from the camera body with ease and adjustability. The creative photographer adds rods to create dramatic and creative lighting effects with the on-camera...
Availability: In Stock
$1300
QTY
Part #: 066

The Manfrotto 066 Double Female Stud is a double ended 5/8" diameter stud that has a 1/4"-20 female thread on one side, and a 3/8" female thread on the other side. Use it to extend an existing threaded stud.
Availability: In Stock
$475
QTY
Part #: 350602-9

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1100
QTY
Part #: 350602-7

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1500
QTY
Part #: 350602-10

MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
$1000
QTY
Part #: B119738

The Matthews Pivoting Yoke for Matthboard (Black) is a positive lock off yoke made to hold Expendable Reflectors, gives the same feel and look as a conventional hard board yoke.

Features:
  • Gives the same look as conventional hard board yoke
  • Made to hold expendable reflectors
Availability: In Stock
$13345
QTY
Free Shipping
Part #: YA095
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$2999
QTY
Part #: RS3113

Converts 1/4 x 20 to 3/8" post. 2-1/4" high.
Availability: In Stock
$695
QTY
Part #: 037

The Manfrotto 037 Reversible Short Stud is a short stud made from brass that fits into the Super Clamp. It features a 3/8" screw at one end and a 1/4"-20 screw at the other end. Replaces old part number 2907.
Availability: In Stock
$499
QTY
Part #: 026

The Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8".

FEATURES:
  • Bracket tilts
...
Availability: In Stock
$3419
QTY
Part #: A10

The Aputure A10 Articulating Magic Arm is a 10 inch multi-function magic arm, which features a hyper-stable and reliable locking system. It can be easily locked at all joint activities and fix in more position. The locking a10 can help you to experience a hyper-stable, but flexible support system....
Availability: In Stock
$4900
QTY
Free Shipping
Part #: 119

Universal short 16 mm spigot with double female thread 1/4" and 3/8".
Availability: In Stock
$488
QTY
Part #: 350613
Availability: In Stock
$9995
QTY
Free Shipping
Part #: YWA22

This set of three Phototools locking casters are made for light stands with 22mm diameter legs. The casters slip over the end of the legs and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$4999
QTY
Free Shipping
Part #: RS3139P

The RPS Studio 3/8 to 1/4-20 Adapter converts a 3/8 inch male threaded screw to a 1/4 inch-20 screw. The adapter is made with highly reliable and strong brass metal for long life.
Availability: In Stock
$795
QTY
Part #: YA099

The Phototools Quadruple Shoe Mount Bracket allows you to attach up to four flashes to one light stand. The bracket also features an umbrella socket which can be used with or without a shoot through or reflective umbrella.

If you are looking for increased overall power or a quicker recycling...
Availability: In Stock
$2999
QTY
Part #: 861832

The Matthews Digital Imaging Technician Tray Kit media tray allows photographers, videographers, editors and DIT's to easily support media devices using industry standard tools. The new media tray will hold laptops including the popular MacBook Pro and MacBook Air series, or any other device within...
Availability: In Stock
$11900
QTY
Free Shipping
Part #: 122B

Extendable arm with double male spigot. Minimal height 48cm, maximal height 80cm.

Minimum Extension     21" (53 cm)
Maximum Extension     33.5" (85 cm)
Weight     1 lb (0.45 kg)
Attachment Size     5/8" male studs on each end, with 3/8" thread
Availability: In Stock
$2789
QTY
Part #: KG001712

The G001712 is a mini extension arm with a hexagonal stud on one side, designed for the Convi and Super Viser clamps and a baby 5/8" (16mm) receiver on the other. It has a double ball elbow joint giving you the ability to articulate the two sides in any direction.
Availability: In Stock
$2725
QTY
Part #: RS3138P

The new RPS Studio Light Stand Adapter 1/4-20 to 3/8 Inch Dual Male Spigot is solid brass featuring 2 male 1/4-20 threads and can be mounted via any 5/8 inch receiver. Total length is 1-9/16 inches.

Availability: On Backorder
$995
QTY
Part #: DL0318P
This adapter accepts umbrellas with shafts up to 3/8” and securely locks it in place via a retaining spring and locking screw. It can be mounted on light stands with studs up to 5/8”. This adapter tilts a full 180° and securely locks via a saw-tooth design. The adjustable foot accepts different...
Availability: In Stock
$3495
QTY
Part #: DL0316P

This is a versatile bracket that will fit on almost any light stand. It includes two removeable, reversible studs to adapt to light stands with top studs smaller than the standard 5/8 inch. It also includes a shoe mount, which will accept virtually any shoe-mount flash unit.
Availability: In Stock
$1995
QTY
Part #: 302

The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
$4990
QTY
Free Shipping
Part #: 681013

This arm features the strongest and most popular Grip Head in the industry. Guaranteed to hold, it will not slip. Plates feature two holes 3/8 and 5/8", eliminating confusion. Castings offer positive lock in all directions.
Availability: In Stock
$4930
QTY
Free Shipping
Part #: 1100

Illuminator Arm, has a double ball-joint for exact positioning. The clip mechanism firmly grips the product frame and fits on any stand with a standard fitting.
Availability: In Stock
$7340
QTY
Free Shipping
Part #: T0111

Snap-in 4 in 1 screwdriver. Tips include 1 each of small & large Phillips and small & large flathead.
Availability: In Stock
$695
QTY
Part #: 853276

Arri Safety Cable for all Arri lights less than 2.0 lbs.
Availability: In Stock
$935
QTY
Part #: F1000

Ideal for mounting small lights and camera systems onto flat, non-porous surfaces such as glass. A perfect tool for rigging car shoots.
Availability: In Stock
$6988
QTY
Free Shipping
Part #: F1100

The Avenger F1100 6.0 in. Pump Cup with Fixed Baby Pin uses a 6.0 in. (15.24 cm) suction cup to adhere to onto flat, non-porous surfaces such as glass. A perfect tool for rigging car shoots with a fixed baby pin for added stability. It features a fixed 5/8 in. pin and is best suited for holding...
Availability: In Stock
$3900
QTY
Part #: F800

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: In Stock
$1095
QTY
Part #: F805

Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: In Stock
$1250
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]