MAIL ORDER 800-321-4726
Light Stand Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: D700B

Positions and holds reflector for hands free use.
Availability: On Backorder
$5688
QTY
Free Shipping
Part #: RS3138P

The new RPS Studio Light Stand Adapter 1/4-20 to 3/8 Inch Dual Male Spigot is solid brass featuring 2 male 1/4-20 threads and can be mounted via any 5/8 inch receiver. Total length is 1-9/16 inches.

Availability: On Backorder
$995
QTY
Part #: KG000812

The G000812 is a double-sided hex stud designed for the Convi Clamp System. One side has a 1/4"-20 male thread and the other has a 3/8"-16 male thread. The G000812 is made from brass.
Availability: On Backorder
$500
QTY
Part #: RS3122

The RPS Studio Stud 1/4x20-Reversible Spigot allows a quick change from 1/4-20 male threads to 3/8 In. male threads. This 3/8 In. spigot features a flat side for each spigot side to ensure that it is secured in place.
Availability: On Backorder
$1495
QTY
Part #: 3744

The Westcott Zeppelin Mounting Arm with Built-In Grip is additional accessory to mount a light on a single light stand. It features potability and lets the user to add light inside the light modifier with no other stand to add while shooting on site. The arm also has a padded grip for comfortable...
Part #: 409108

The Butterfly/Overhead Hollywood Frame - 8x8 ft - 1 In. Square Tubing is a useful and beautiful quality farme by Mathews. Matthews offers a wide variety of frames to hold your overheads and butterflys. Hollywood Frames feature corners that contain all tubes in a captie state. No more loose pieces...
$58140
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: 377584

The Matthews Mombo Combo Stand Hollywood Wheels are designed in new style for Mombo Combo Hollywood Stand. The wheels come in set of three and are made of high quality material for long life. The wheels are durable and fit 14x14x18mm.
Part #: E600

The Avenger E600 Aluminum Snap-In Pin has a hexoganal end that snaps into a Super Clamp; the other end will accept a lighting fixture that has a 5/8" female receptor.
Part #: 426018

The 24 in. Baby Stand Extension is a wonderful product by Matthews. When a Baby Lighting fixture needs to be just a little higher, the stand extension can be added to the top of the stand, nail on plate or other hardware. A light weight extendable version is also available.
$3195
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Part #: 823

This Manfrotto Hydrostatic Arm features a new locking mechanism. A ball pivot encapsulated in a hydraulic oil-filled chamber enables the arm to be locked in position with only a gentle turn of the knob. This is accomplished by the fact that the oil surrounds the ball joint and applies pressure...
Part #: L483021E

A suitable method of hanging light fixtures from above, for unobstructed floor areas - the Arri Complete Stirrup and Mount for Arri Lights includes a vice clamp, stirrup, and safety pin. Two sections, one riser.
Part #: 549100

The Matthews Diffusion Frame - 48x48 In. - 3/4 In. Square Tubing having flat edges of the Knife Blade frames which make them ideal for quick gel changes with 2 sided tape.
$10115
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: F300

A wall plate with a junior receiver to mount larger fixtures.
Part #: B429742

The Matthews Lightweight Telescoping Hanger with Pipe Clamp and Stirrup Hanger (2-4 ft.) is designed for use with lightweight flourescents or other fixtures weighing not more than 25 lbs. (11.4kg.) it has been engineered to telescope from the grid with nominal ceiling clearance. Telescoping Hangers...
Part #: E650

The E650 Baby (5/8 In.) Pin with Collar - 6 In. is a very useful and a good quality Pin by its manufacturer Avenger. The collar acts as an anchor to prevent the pin from sliding completely through your grip clamp.
$999
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Part #: 8141

This Manfrotto Mini Hydrostatic 5" Arm #8141 is a pint-sized arm that happens to be quite useful. It can support loads of up 7.7lbs. It is perfect for videographers, to mount a small external monitor or microphone to a video camera. The arm also features dual mounts to affix devices with 1/4"-20...
Part #: RS5056

The RPS Studio 4ft. Articulating Arm is heavy duty 4 Foot Articulating Arm. It is combination of two, 2 foot sections that easily attach via the built-in 5/8 In. receivers and spigots. It is flexible to rotate independently to meet your requirements of adjustments.

Push button releases the lock and...
Part #: DE21220

The CPM Delta 1 3/8 female to 5/8 stud x 2 In. long is oversized aluminum light stand adapter, steel. It enlarges a 3/8 in light stand top stud to 5/8 in standard stud to aluminum 2 in long.
Part #: E600C

The Avenger E600C Steel Snap-In Pin has a hexoganal end that snaps into a Super Clamp; the other end will accept a lighting fixture that has a 5/8" female receptor.
Part #: D050

Rubber cover gives better grip for 80mm T-handles, even in cold weather.
Part #: 059

The Manfrotto 059 Set of Two Background Hooks will fit the Bogen 035 Super Clamps, and are designed to work with the Expan Drive System (046). They are constructed of black steel.

* Replaces part # 2911
Part #: F1501

A foamcore support clamp to enable precise positioning. Mounts via a 16mm socket.
Part #: F810

The Avenger F810 Baby Plate with 5/8" Swivel Spigot is a steel plate with a swiveling 5/8" Baby pin with a large T-handle that allows precise positioning of a light or accessory. The F810 has eight anchor points for nails or screws. Hardware is not included.
Part #: F820TH

Swivelling adapter can attach to your fixtures. Using the "T" Handle allows holding items in place and gives a range of possibilities in positioning.
Part #: 429676

Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or drop down tube in slide up when there is sufficient room between the grid the ceiling. It is therefore possible for a Matthews Single Extension Tel...
Part #: 437001

The Matthews Spacer for Truss Me Bracket in conjunction with lengths or 1-1/4" aluminum or steel pipe, will make an immediate truss. Material selection for various types of pipe is based on proper pay-load calculations. The Pass Through Bracket (9-1/2" center to center) allows the vertical truss...
Part #: 437004

The Matthews Truss Me Bracket 90 Degree Pass Through allows a vertical truss column to pass through the horizontal member to allow for multiple horizontal members. In cooperation with random lengths or 1-1/4" aluminum or steel pipe, will make an immediate truss. Material selection for various...
Part #: B429724

The Matthews Lightweight Telescoping Hanger with Clamp (3-6 ft.) is designed for use with lightweight flourescents or other fixtures weighing not more than 25 lbs. (11.4kg.) it has been engineered to telescope from the grid with nominal ceiling clearance. Telescoping Hangers are available in a...
Part #: 415173

The Matthews Baby Ballhead Adapter is another creative innovation from the design team, made as one-piece out of 6061 T-6 Aluminum; this strong, sleek-looking adapter converts any 5/8" baby pin or 1-1/8" junior receiver into a 3/8-16" threaded spud. This new adapter will allow the user to mount...
Part #: 429691

Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or drop down tube in slide up when there is sufficient room between the grid the ceiling. It is therefore possible for a Matthews Triple Extension Tel...
Part #: 169197

The RoadFlag Fabric Solid Black - 48x48 In. (1.2x1.2m) is a useful product by Matthews. They presents a new, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter, RoadFlags offers a larger 4' x 4' (122cm x 122cm) surface l...
$10625
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: 169198

The RoadFlag Fabric, Silver Lame - 48x48 In. (1.2x1.2m) is a useful product by Matthew. Now Matthew presents a new, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter, RoadFlags offers a larger 4' x 4' (122cm x 122cm) surface...
$8685
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: B429748

The Matthews Lightweight Telescoping Hanger with Pipe Clamp and Stirrup Hanger (4-8 ft.) is designed for use with lightweight flourescents or other fixtures weighing not more than 25 lbs. (11.4kg.) it has been engineered to telescope from the grid with nominal ceiling clearance. Telescoping Hangers...
Part #: B429726

The Matthews Telescoping Hanger with Clamp (1.5-3 ft.) is designed for use with lightweight fluorescents or other fixtures weighing no more than 25 lbs. (11.4kg.) engineered to telescope from the grid with nominal ceiling clearance. Telescoping Hangers are from 1.5 to 3 feet range of lengths and...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]