MAIL ORDER 800-321-4726
Glass Covers & Domes
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 101534

The frosted, uncoated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto P7 flash heads. The color temperature of the flash output is approximately plus 300 degree K.
Availability: On Backorder
$22100
QTY
Free Shipping
Part #: 101561

The Profoto Frosted Glass Dome for the D1 Monolight protects the flashtube of the D1 without affecting the color or intensity of the light. This dome snaps into place over the flashtube assembly.
Availability: On Backorder
$17100
QTY
Free Shipping
Part #: 101533

The frosted, UV Coated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto Pro 7 flash heads.
Availability: On Backorder
$23500
QTY
Free Shipping
Part #: 101597

The Profoto Glass CVR Plus 100mm is a heavy duty glass cover in 2.8mm thick Pyrex glass. Frosted glass for best result with most Profoto Light Shaping Tools. Fits as accessory on all Pro and Acute heads with up to 500W model light lamp. Available in three optional coatings for a warmer or colder...
Availability: On Backorder
$24900
QTY
Free Shipping
Part #: 531120

Create special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want.
Part #: 101592

The Profoto 75mm Glass Cover (Frosted) for ProHead, Pro-B, Acute/D4 and AcuteB heads. Max. 250 W model light, +300 K color temperature that is suitable for safety of the head.
Part #: 101585

The Profoto Glass Cover for Fresnel Spot Flashtube is a heat resistant clear glass dome to protect the flashtube and modeling light during setup or transportation of the flash head.
Part #: 101536

The clear, UN coated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto Acute 2 and 2-D4 flash heads.
Part #: 331524

The Profoto Frosted Glass Plate for D1 and B1 Monolights is a standard frosted glass plate for D1 Monolights and B1 Off-Camera flash. it creates an even diffused light. This glass plate is fixed with the help of 3 clips that are part of the D1.
Part #: BW1005

The Bowens Flash Tube Cover for Gemini Monolight is used to protect the flash tube and modeling lamp when it is not in use. It is the best solution for safety of lamps during transportation. The cover is made of high quality material for protection against any shock and vibration.
Part #: 401310

Made of tough heat-resistant Lexanr plastic, these diffusion screens clip to the reflector rim and provide a soft, even effect.
Part #: 101520

The frosted uncoated heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport. For the Profoto Acute-AB, Acute Twin PBT, Compact, PB Head PD575, Pro Tungsten. Frosted Uncoated Supplied with ABS, CPS and CPPS For harder, colder light +300 degree K
Part #: 101537

The clear, UV Coated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto Acute flash heads.
Part #: 9454644

Softer warmer light than clear dome. Approximately 600k warmer than uncoated frosted dome.
Part #: 435196

Stainless wire diffusion is impervious to rust and holds up better under uneven intense heat making it preferable for use with open face non freznel lighting fixtures. May be stacked to achieve limitless variation of light intensity.

The 7-3/4" Pancake Gel Frame provides an effective alte...
Part #: 435198

Stainless wire diffusion is impervious to rust and holds up better under uneven intense heat making it preferable for use with open face non freznel lighting fixtures. May be stacked to achieve limitless variation of light intensity.

The 7-3/4" Pancake Gel Frame provides an effective alte...
Part #: DPEYESET

This set consists of three acrylic filters and a holder. These lenses produce a glowing-type diffused light with soft edges. Each filter produces a slightly different effect and can be combined to increase their effects. Will fit any lens with the projection attachments.

As long time users of

...
Part #: 0151

Converts tungsten (3200K) to the approximate daylight(5500K) color temperature and absorbs U.V. light. The expected light loss is approximately 50% (one f-stop). Requires either the Complete Barndoor or the Barndoor Frame for mounting.
Part #: D224

Locks directly into the DP, pans and tilts with the light. Attaches directly to DP to hold gels 12" x 16" (30.5 x 40.6 cm). Permanent gel clips and adjustable support arm.
Part #: D251

Converts tungsten (3200K) to the approximate daylight (5500K) color temperature and absorbs U.V. light. The expected light loss is approximately 50% (one f-stop). Requires either the Complete Barndoor or the Barndoor Frame for mounting.
Part #: 0150

Softens light; reduces intensity and contrast; improves shadow quality. Light loss approx. 40% in flood.
Part #: D252

Absorbs U.V. light with a 5% light loss. Requires the Complete Barndoor or the Barndoor Frame for mounting.
Part #: IP40

Holds 5 x 6" gels. Collapses for storage like Tota-frame.
Part #: T119

This protective screen protects against the lamp being touched accidentally and lamp explosion. Also softens the light and transmits 70% of the light output of the lamp.
Part #: 101562

Round, frosted glass cover (dome) for D1 monolights. Widens the light spread, recommended in combination with the Softlight and Giant reflectors. Warm color temperature (-600 K).
Part #: 101563

Round, frosted glass cover (dome) for D1 monolights. Widens the light spread, recommended in combination with the Softlight and Giant reflectors. Warmer color temperature (-300 K).
Part #: FLXF001

The Fiilex 5 Ft. Fiber Glow is designed as a side emitting (GLOW) 14mm diameter fiber optic for use on the P200 FlexJet. This flexible light source can be bent and wrapped around in a variety of positions. The design of the Fiber Glow is to properly illuminate the entire fiber as even as possible.&...
Part #: 101590

The Profoto Glass cover plus 75mm frosted -300k has been made thicker, more robust and safe to work with light heads. The frosted surface makes the quality of the modeling light almost identical to the flash light. The Glass cover is helpful to spread light evenly all around and protects the flash...
Part #: 101591

The Profoto Glass Cover Plus 75mm Frosted -600k has been made thicker, more robust and safe to work with light heads. The frosted surface makes the quality of the modeling light almost identical to the flash light. The Glass cover is helpful to spread light evenly all around and protects the flash...
Part #: 101594

The Profoto Glass Cover Plus 75mm Clear Uncoated has been made thicker, more robust and safe to work with light heads. The Glass cover is helpful to spread light evenly all around and protects the flash tube against any accidental damage.
Part #: 101595

The Profoto Glass Cover Plus 100mm Frosted -300k has been made thicker, more robust and safe to work with light heads.  The frosted surface makes the quality of the modeling light almost identical to the flash light. The Glass cover is helpful to spread light evenly all around and protects the...
Part #: 101596

The Profoto Glass Cover Plus 100mm Frosted -600k has been made thicker, more robust and safe to work with light heads.  The frosted surface makes the quality of the modeling light almost identical to the flash light. The Glass cover is helpful to spread light evenly all around and protects the...
Part #: 101598

The Profoto Glass Cover Plus 100mm Clear -300k has been made thicker, more robust and safe to work with light heads. The Glass cover is helpful to spread light evenly all around and protects the flash tube against any accidental damage.
Part #: 101599

The Profoto Glass Cover Plus 100mm Clear Uncoated has been made thicker, more robust and safe to work with light heads. The Glass cover is helpful to spread light evenly all around and protects the flash tube against any accidental damage.
Part #: 907022

The Photogenic 400Ws Flashtube Protector for MCD400R is specially designed for use with Matrix MCD400R 400Ws Monolight to protect flash tube and modeling light from damage. It is made of strong ABS plastic and is compatible with the Matrix MCD400R 400Ws Monolight.

Features:
  • Specially designed
...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]