MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 101592

The Profoto 75mm Glass Cover (Frosted) for ProHead, Pro-B, Acute/D4 and AcuteB heads. Max. 250 W model light, +300 K color temperature that is suitable for safety of the head.
Part #: 101536

The clear, UN coated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto Acute 2 and 2-D4 flash heads.
Part #: 101534

The frosted, uncoated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto P7 flash heads. The color temperature of the flash output is approximately plus 300 degree K.
Availability: In Stock
$22100
QTY
Free Shipping
Part #: T120

Holds 10 x 12" (25.4 x 30.5cm) gels and diffusion. Locks directly into the light allowing it to tilt and pan with the light unit. Best of all, the Tota-frame folds down to 12 x 1 x 1" (30.5 x 2.5 x 2.5cm) for easy transport and storage.
Availability: In Stock
Part #: 331524

The Profoto Frosted Glass Plate for D1 and B1 Monolights is a standard frosted glass plate for D1 Monolights and B1 Off-Camera flash. it creates an even diffused light. This glass plate is fixed with the help of 3 clips that are part of the D1.
Part #: 0119

Supplied with light. Max. wattage: 500w. Protects against lamp explosion. Must always be used.
Availability: In Stock
$995
QTY
Part #: 530120

Creates special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want and slide it into the lampheads accessory holders.
Availability: In Stock
$1955
QTY
Part #: OG001

This replacement Opal Glass Diffuser disc mounts in any of the Mola Soft Reflectors, and softens the light output even more. It reduces the light output by 1/3 stop.
Availability: In Stock
$7795
QTY
Free Shipping
Part #: 150081
Protection Glass (150081)  for older Broncolor Minipuls
Availability: In Stock
$900
QTY
Part #: RS4012D

10" Diffuser only for RS-4012.
Availability: In Stock
$799
QTY
Part #: 9454638

Protect your flashtube, the clear dome will not diffuse the light at all. This is the standard glass dome that comes in the kits.
Availability: In Stock
$9000
QTY
Free Shipping
Part #: BW1005

The Bowens Flash Tube Cover for Gemini Monolight is used to protect the flash tube and modeling lamp when it is not in use. It is the best solution for safety of lamps during transportation. The cover is made of high quality material for protection against any shock and vibration.
Part #: 401310

Made of tough heat-resistant Lexanr plastic, these diffusion screens clip to the reflector rim and provide a soft, even effect.
Part #: 101561

The Profoto Frosted Glass Dome for the D1 Monolight protects the flashtube of the D1 without affecting the color or intensity of the light. This dome snaps into place over the flashtube assembly.
Availability: In Stock
$17100
QTY
Free Shipping
Part #: 101520

The frosted uncoated heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport. For the Profoto Acute-AB, Acute Twin PBT, Compact, PB Head PD575, Pro Tungsten. Frosted Uncoated Supplied with ABS, CPS and CPPS For harder, colder light +300 degree K
Part #: RS4015D

Diffuser for RS-4015 reflector
Availability: In Stock
$1195
QTY
Part #: 101537

The clear, UV Coated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto Acute flash heads.
Part #: 101533

The frosted, UV Coated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto Pro 7 flash heads.
Availability: In Stock
$23500
QTY
Free Shipping
Part #: 101535

The frosted extra UV coated and heat resistant glass dome protects the flashtube and modeling light from damage during set up or transport of the Profoto Pro 7 flash heads.

The color temperature of the flash output Warms color by 300 degreeK.
Availability: In Stock
$23500
QTY
Free Shipping
Part #: 9454644

Softer warmer light than clear dome. Approximately 600k warmer than uncoated frosted dome.
Part #: 916712

This diffuser is designed to clip onto the front of a Photogenic 16" reflector. It slightly softens the light output of a Photogenic flash head.
Availability: In Stock
$7895
QTY
Free Shipping
Part #: 918771

Photographic black powder-coated metal frame with spun diffusion glass for a softer light source, used with PL7MF. Will eliminate approximately one f-stop
Availability: In Stock
$3995
QTY
Part #: 435196

Stainless wire diffusion is impervious to rust and holds up better under uneven intense heat making it preferable for use with open face non freznel lighting fixtures. May be stacked to achieve limitless variation of light intensity.

The 7-3/4" Pancake Gel Frame provides an effective alte...
Part #: 435198

Stainless wire diffusion is impervious to rust and holds up better under uneven intense heat making it preferable for use with open face non freznel lighting fixtures. May be stacked to achieve limitless variation of light intensity.

The 7-3/4" Pancake Gel Frame provides an effective alte...
Part #: 9454650

This Hensel EH Universal Glass Dome is a clear, glass dome for the Hensel EHT Porty flash head's flashtube.
Availability: In Stock
$9000
QTY
Free Shipping
Part #: DPEYESET

This set consists of three acrylic filters and a holder. These lenses produce a glowing-type diffused light with soft edges. Each filter produces a slightly different effect and can be combined to increase their effects. Will fit any lens with the projection attachments.

As long time users of

...
Part #: 0151

Converts tungsten (3200K) to the approximate daylight(5500K) color temperature and absorbs U.V. light. The expected light loss is approximately 50% (one f-stop). Requires either the Complete Barndoor or the Barndoor Frame for mounting.
Part #: D224

Locks directly into the DP, pans and tilts with the light. Attaches directly to DP to hold gels 12" x 16" (30.5 x 40.6 cm). Permanent gel clips and adjustable support arm.
Part #: D251

Converts tungsten (3200K) to the approximate daylight (5500K) color temperature and absorbs U.V. light. The expected light loss is approximately 50% (one f-stop). Requires either the Complete Barndoor or the Barndoor Frame for mounting.
Part #: 531120

Create special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want.
Part #: 531220

Create special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want. The filter frames slide into the lamphead accessory holders. Arri Filter Frames are circular and heat resistant.
Availability: In Stock
$3825
QTY
Part #: 531320

Creates special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want and slide them into the lamphead accessory holders.
Availability: In Stock
$2975
QTY
Part #: 531620

Creates special effects with the addition of filters. They slide into the lamphead accessory holders. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want.
Availability: In Stock
$2975
QTY
Part #: 0150

Softens light; reduces intensity and contrast; improves shadow quality. Light loss approx. 40% in flood.
Part #: 0152

Clear Glass. Absorbs U.V. with 5% Light Loss. 4 Oz.
Availability: In Stock
$3495
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]