MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 531220

Create special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want. The filter frames slide into the lamphead accessory holders. Arri Filter Frames are circular and heat resistant.
Availability: In Stock
$3825
QTY
Part #: 531120

Create special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want.
Part #: 531320

Creates special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want and slide them into the lamphead accessory holders.
Availability: In Stock
$2975
QTY
Part #: 531620

Creates special effects with the addition of filters. They slide into the lamphead accessory holders. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want.
Availability: In Stock
$2975
QTY
Part #: 530120

Creates special effects with the addition of filters. Change background colors or the over all mood of the scene. Just add this filter frame and all the filters you want and slide it into the lampheads accessory holders.
Availability: In Stock
$1955
QTY
Part #: BW1005

The Bowens Flash Tube Cover for Gemini Monolight is used to protect the flash tube and modeling lamp when it is not in use. It is the best solution for safety of lamps during transportation. The cover is made of high quality material for protection against any shock and vibration.
Part #: 172016
Replacement Broncolor Glass Tube Cover for Impact #172016. 5900K

Dimensions: 2.75 x 1.80 inches
Availability: In Stock
$3999
QTY
Part #: 172017
Replacement Broncolor Glass Cover - Diffused Tip #172017. 5900K

Dimensions: 2.75 x 2.25
Availability: In Stock
$2499
QTY
Part #: 150081
Protection Glass (150081)  for older Broncolor Minipuls
Availability: In Stock
$900
QTY
Part #: DPEYESET

This set consists of three acrylic filters and a holder. These lenses produce a glowing-type diffused light with soft edges. Each filter produces a slightly different effect and can be combined to increase their effects. Will fit any lens with the projection attachments.

As long time users of

...
Part #: DPGH
A two part holder for round, standard M-size metal gobos (shadow patterns).
Availability: In Stock
$2450
QTY
Part #: FLXF002

The Fiilex 20' Fiber Glow is designed as a side emitting (GLOW) 14mm diameter fiber optic for use on the P200 FlexJet. This flexible light source can be bent and wrapped around in a variety of positions. The design of the Fiber Glow is to properly illuminate the entire fiber as even as possible....
Part #: FLXF001

The Fiilex 5 Ft. Fiber Glow is designed as a side emitting (GLOW) 14mm diameter fiber optic for use on the P200 FlexJet. This flexible light source can be bent and wrapped around in a variety of positions. The design of the Fiber Glow is to properly illuminate the entire fiber as even as possible.&...
Part #: FLXA006

The Fiilex Dome Diffuser for P360 Light is designed to attach to the magnetic mounts on the front of the P360. The Dome Diffuser increases the beam angle and also softens the light. Dome diffusers spread the beam angle, diffuse, and soften the light's output. It can be combined with other light...
Availability: In Stock
$5900
QTY
Part #: 9454638

Protect your flashtube, the clear dome will not diffuse the light at all. This is the standard glass dome that comes in the kits.
Availability: In Stock
$9000
QTY
Part #: 9454644

Softer warmer light than clear dome. Approximately 600k warmer than uncoated frosted dome.
Part #: 9454650

This Hensel EH Universal Glass Dome is a clear, glass dome for the Hensel EHT Porty flash head's flashtube.
Part #: D251

Converts tungsten (3200K) to the approximate daylight (5500K) color temperature and absorbs U.V. light. The expected light loss is approximately 50% (one f-stop). Requires either the Complete Barndoor or the Barndoor Frame for mounting.
Part #: 0151

Converts tungsten (3200K) to the approximate daylight(5500K) color temperature and absorbs U.V. light. The expected light loss is approximately 50% (one f-stop). Requires either the Complete Barndoor or the Barndoor Frame for mounting.
Part #: PRM240

This Lowel Gel Frame for Prime 200 LED Light is a replacement for the one that ships as a standard accessory for this light. It accepts gels and diffusion material cut to size.
Availability: In Stock
$4999
QTY
Part #: PRM440

This Lowel Gel Frame for Prime 400 LED Light is a replacement for the one that ships as a standard accessory for this light. It accepts gels and diffusion material cut to size.
Availability: In Stock
$4999
QTY
Part #: D224

Locks directly into the DP, pans and tilts with the light. Attaches directly to DP to hold gels 12" x 16" (30.5 x 40.6 cm). Permanent gel clips and adjustable support arm.
Part #: 0150

Softens light; reduces intensity and contrast; improves shadow quality. Light loss approx. 40% in flood.
Part #: 0152

Clear Glass. Absorbs U.V. with 5% Light Loss. 4 Oz.
Availability: In Stock
$3495
QTY
Part #: D252

Absorbs U.V. light with a 5% light loss. Requires the Complete Barndoor or the Barndoor Frame for mounting.
Part #: T120

Holds 10 x 12" (25.4 x 30.5cm) gels and diffusion. Locks directly into the light allowing it to tilt and pan with the light unit. Best of all, the Tota-frame folds down to 12 x 1 x 1" (30.5 x 2.5 x 2.5cm) for easy transport and storage.
Availability: In Stock
Part #: IP40

Holds 5 x 6" gels. Collapses for storage like Tota-frame.
Part #: 0119

Supplied with light. Max. wattage: 500w. Protects against lamp explosion. Must always be used.
Availability: In Stock
$995
QTY
Part #: T119

This protective screen protects against the lamp being touched accidentally and lamp explosion. Also softens the light and transmits 70% of the light output of the lamp.
Part #: 435198

Stainless wire diffusion is impervious to rust and holds up better under uneven intense heat making it preferable for use with open face non freznel lighting fixtures. May be stacked to achieve limitless variation of light intensity.

The 7-3/4" Pancake Gel Frame provides an effective alte...
Part #: 435196

Stainless wire diffusion is impervious to rust and holds up better under uneven intense heat making it preferable for use with open face non freznel lighting fixtures. May be stacked to achieve limitless variation of light intensity.

The 7-3/4" Pancake Gel Frame provides an effective alte...
Part #: OG001

This replacement Opal Glass Diffuser disc mounts in any of the Mola Soft Reflectors, and softens the light output even more. It reduces the light output by 1/3 stop.
Availability: In Stock
$7795
QTY
Part #: 916712

This diffuser is designed to clip onto the front of a Photogenic 16" reflector. It slightly softens the light output of a Photogenic flash head.
Availability: In Stock
$7895
QTY
Part #: 918771

Photographic black powder-coated metal frame with spun diffusion glass for a softer light source, used with PL7MF. Will eliminate approximately one f-stop
Availability: In Stock
$3995
QTY
Part #: PH01203

The Phottix Flash Tube Cover for Indra500 TTL Battery Powered Studio Light is a plastic front cover that protects the studio light flash tube. The cover is fitted with Bowens-compatible mount. The cover protects the flash tube against dirt dust and accidental breakage.
Availability: On Backorder
$1395
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]