MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 504503

The Arri Head to Ballast 50 ft Cable connects the Arri 400 watt HMI Pocket Par.
$34000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: 502202

The Arri Head to Ballast 50 ft long Cable connects the Fresnel 200, Arrisun 2 and Arri X2 200 HMI lights to their ballasts.
$24650
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: 700.0023

The Cineo Lighting Matchstix D-Tap Male to DC Barrel Female Power Cable (36 In.) is used to power on the LED light. The cable is 36 inches long for distance operation and is made of high quality material for long life.
Availability: On Backorder
$2804
QTY
Part #: CC8236

The CC-8236 5 ft coiled DC power cable connects the SL-3000 light housing to a DC power source with a cigarette plug connector. It features a two pin connector with a threaded collar for secure light housing connections and the standard male cigarette plug connector for the DC power source.
Availability: In Stock
$999
QTY
Part #: DT243


The DT24-3 Power Supply/Control Unit offers the same functions and options as the DT12-4 except that this unit powers three lights, each equipped with 150W lamps at a nominal voltage of 24V. Its AC power input can be set for every AC power in the world from 100V to 255V in 24 steps.

Each output

...
Part #: DPOW3

DPOW3 Light head cable connects DLH4 light head to DT12-4 or DT24-3 power supply.

May also be used as an extension cable.

Length: 8 m (26.2')

Part #: FLXR008

The Fiilex 90W AC/DC Power Adapter is a useful power adopter for adopting AC power to DC power for the operation of Fiilex lighting heads. It provides stable DC input for longer period.
Part #: FLXA012

The Fiilex 2.5m Curled D-TAP Cable is a coiled cable that is 2.5m long when extended and allows for connection to a DC battery without having excess slack on set. This cable is designed for an alternative way to power the P360/P200/P180. The plug fits into industry standard D-Tap ports that are...
Availability: In Stock
$3900
QTY
Part #: FLXA011

The Fiilex D-Tap Cable - Type A1 (also known as P-Tap) is designed for an alternative way to power the P360/P200/P180. The plug fits into industry standard D-Tap ports that are commonly found on DC Broadcast Batteries. This is a coiled cable that is slightly under 2 ft long when extended and allows...
Availability: In Stock
$2900
QTY
Part #: FLXA013

The Fiilex D-TAP Type B1 Cable is designed for an alternative way to power the P360/P200/P180. The plug fits into industry standard D-Tap ports that are commonly found on DC Broadcast Batteries. The cable is coiled and could extend up to 2 ft. for connecting the battery source to the light. The...
Part #: FLXA033

The Fiilex DMX Link Cable allows two P360EX lights to be daisy chained to the DMX Controller box. Fully extended the cable is 5'10" inches. Adding cables will allow multiple lights to be attached together and controlled from the same DMX control panel.

Features:
  • 4-Channel Stereo Link Cable
...
Availability: In Stock
$2000
QTY
Part #: X1625

Extends the range of one of the Kino Flo's 4-Bank fixture components. 25 feet long.
Part #: 800-0288-A

Connect your Stella Pro to an external battery with the Light & Motion DTAP Cable for Stella PRO connection to both power and recharge the light. The cable is made of high quality material for long life and robust use with Stella Pro 5000 light.

Features:
  • Use with Stella Pro 5000 light
  • Made
...
Availability: In Stock
$3999
QTY
Part #: 800-0300-A

Recharge the Stella Pro with a vehicle's 12V plug-in power receptacle with the Light & Motion Car Cable for Stella PRO. The cable is made of high quality material for long life and robust use with Stella Pro 5000 light.

Features:
  • Use with Stella Pro 5000 light
  • Made of high quality material
...
Availability: In Stock
$3999
QTY
Part #: 9005000

The Litepanels MACA is an AC power adapter specifically designed to power the Litepanels Micro LED light housing. It comes with an international plug set for adapting to a variety of local power standards.
Availability: In Stock
$2640
QTY
Part #: P181

Adapts the Pro-light for use with many 30v batteries. No wiring required.
Availability: In Stock
$3995
QTY
Part #: T180

Lowel 16' AC Power Cable with On/Off Switch for the Tota and Omni Lights. #18/3 switched AC
Availability: On Backorder
$3115
QTY
Part #: 63700

This Y-Cable is for use with the Rosco LitePad.

PLEASE NOTE: Cable photograph is for illustrative purposes only. Actual cable will differ in appearance.
Part #: RS4059

This 4 in 1 Florescent Adapter allows the use of 4 flourescent lamps in one socket. used in the folding softboxes. Depending on the lamp which is selected, the light output is equivalent to over 1000 watts of photoflood. Maximum wattage is 300 watts.
Availability: On Backorder
$2995
QTY
Part #: 402010

This Smith-Victor DC-1 Dimmer Variable Wattage Control is a simple dimmer control for use with tungsten lights rated 600 total watts or less. It consists of a 110 Volt AC 2-prong plug, a rheostat with sliding control, and a 2-prong socket. Note: a 3-2 prong adapter such as BH# GBGA2 is required...
Availability: In Stock
$2195
QTY
Part #: 7423

The Westcott Flex D-Tap Cable is an essential accessory for pairing Flex 10" x 3", 10" x 10", 1' x 1', and 1' x 2' LED mats with portable power sources. This durable 40" cable features an industry-standard D-Tap end that can be used with the Flex Portable Battery or other D-Tap/P-Tap/PowerTap...
Availability: In Stock
$3990
QTY
Part #: 7436

The Westcott Dimmer Extension Cable for Flex LED Mats (16 ft.) gives filmmakers and photographers the ability to add a full 16 feet of rainproof extension between 1 x 3 ft. and 2 x 2 ft. Flex LED mats and dimmers. This essential Flex accessory provides added protection to Flex dimmers when shooting...
Part #: 7413

Use the Flex LED in and around water without worry with the Flex Dimmer Extension Cable. This high-quality water-resistant cable gives photographers the ability to add 16 feet of extension between the Flex Dimmer and the Flex LED panel.

Features:
  • For use with the Westcott Flex
  • 16 foot extension
...
Availability: In Stock
$2990
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]