MAIL ORDER 800-321-4726
Shop By Category
Filter By
Part #: AT8415

Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts Lightweight, low-profile design is ideal for "fishpole" booms and video use Equally adapted to cylindrical and tapered microphones Features a constant-tension clutch and 360 degree rotation Compatible with 3/8"-16...
Availability: In Stock
Part #: EA86

This shockmount hotshoe assembly mount is for use with a mic shaft ø 19-25 mm.
Part #: 1097

The Calrad Lavalier Clasp-type Microphone Holder is a microphone clip holder (Tie Clip) that fits 7/32 inches diameter microphones. Lavalier Clasp-type Microphone Holder is used for hand free performance.
Availability: In Stock
Part #: 1097BK

The Calrad Lavalier Clasp-type Microphone Holder is a Tie Clip microphone holder that fits 7/32 inches diameter microphones.

Lavalier Clasp-type Microphone Holders are used for hand free performance.
Availability: In Stock
Part #: 3013

The Dinkum FlexiMount gives musicians and professional audio technicians a quick and simple mic mounting solution.  The perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go podcasters, FlexiMount attaches easily to surfaces such as tables, C-stands, lighting grids and drum...
Availability: On Backorder
Part #: 3068

Already own one of our CINE or PRO lens shades? Make your device do double duty with a Dinkum FlexiMount Top 3/8-16 inch Thread. Allows conversion from the lens shade to a mounting device, attaching to a standard 3/8 -16" microphone shock mount.
Availability: In Stock
Part #: KBRGS

A 4" machined aluminum shoe bridge that sits 4" over the camera and can offset accessories to one side. The cold shoe is made of industrial Delrin.
Availability: In Stock

Designed to provide stable and noise free handling for a wide variety of microphones. These shock mounts feature a compact, concise design. They are constructed of lightweight aircraft aluminum and have a non-reflective black anodize finish. The two suspension bands are custom made to our own...
Availability: In Stock
Part #: SMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
Part #: SMIS0030H

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: On Backorder
Part #: QSM1

The Que Audio QSM1 Shockmount for Mini Shot Gun Microphone mounts a Que Audio miniature, pencil-shotgun microphone.
Availability: In Stock
Part #: PG2

The Rode PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.

It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy ad...
Availability: In Stock
Part #: SM6

The Rode's SM6 Shock Mount with Detachable Pop Filter is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes a removable pop shield...
Part #: SM5

The SM5 is a suspension shock mount with ring clamp adaptor that allows the use of R
Availability: In Stock
Part #: SM3

The RODE SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release tilt mechanism, enabling simplified directional angling and minimal visual intrusion.

The SM3 is equipped with a large positioning screw handle for a secure...
Availability: In Stock

The LAV-CLIP is an ergonomic and discreet clip mount for the Rode Lavalier microphone.
Availability: In Stock
Part #: CLIP1

The CLIP1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user.
Availability: In Stock

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: On Backorder

The Rode Vampire Clip is a double-toothed clothing pin that conveniently fastens the R
Availability: In Stock
Part #: 037701

This Rycote Hot Shoe Extension/Extender (20 cm) lets you fit more than one hot attachment onto your equipment.
Availability: In Stock
Part #: 037303

This Hot Shoe Extension allows you to fit multiple attachments to your single hot shoe and also allows you to rotate the attachment 360 degree around the shoe fixture on the camera.
Availability: In Stock
Part #: MZS201

The suspension is designed for outdoor use with optional basket windshields and hairy covers. Supplied with 'pistol' grip and stand mount which both have 3/8' female thread insert. Suspension is by rubber 'O' rings with spare rings supplied. Friction 'cam' locks for securing basket windshield,...
Availability: In Stock
Part #: MZS6

The Sennheiser MZS6 is a Shockmount stand adapter for K6 series power modules.
Part #: MZQ800

The Sennheiser MZQ800 is a Universal Evolution handheld microphone clip.
Availability: In Stock
Part #: ZH100

The Sennheiser ZH100 is a Lavalier "Vampire Clip" (Black).
Availability: In Stock
Part #: 520493
The Sennheiser Bodypack Wire Belt Clip is a replacement for the Sennheiser Bodypack Receiver and Transmitter. The clip is made of high quality material and gives firm grip to hold the body pack.
Availability: On Backorder
Part #: MZQ2EW

The Sennheiser MZQ2-ew is a clip for an ME2 Lavalier Microphone.
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
Copyright © 2015 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.