MAIL ORDER 800-321-4726
Clamps
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: KG701611

The Kupo Convi Clamp With Hex Stud (Black) is more than just an amazing clamp; it's the foundation of an entire grip system.

The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi...
Availability: In Stock
$2629
QTY
Part #: B541004

The Matthews Super Mafer Clamp with 5/8 in. Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength...
Availability: In Stock
$3740
QTY
Part #: 541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes with...
Availability: In Stock
$3740
QTY
Part #: KG702811

Kupo Super Claw is a small clamp with many great features! The new design allows for an increased payload over the former KUPO Pincer clamp and other clamps in the market. What separates this clamp from the competition is the fact that the pads are customer replaceable. Some companies use tape...
Availability: In Stock
$2500
QTY
Part #: 429042

Of Amish design... Also known as the Quacker Clamp or Duck Bill. This clamp is ideal for positioning foam core or bead board.
Availability: In Stock
$8925
QTY
Free Shipping
Part #: 417026

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common use is for camera shots...
Availability: In Stock
$5499
QTY
Free Shipping
Part #: 275

Clamps onto bars up to Ø 35mm. It can be mounted also on 16mm extension arms.

* Replaces item # 2891
Availability: In Stock
$1588
QTY
Part #: 420101

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2” or 3” Center Jaw...
Availability: In Stock
$5780
QTY
Free Shipping
Part #: 035

The Manfrotto 035 Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Replaces item # 2915
Availability: In Stock
$2688
QTY
Part #: YA056

The Phototools Adjustable Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.
Availability: In Stock
$1999
QTY
Part #: 035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
$2988
QTY
Part #: YA051

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$499
QTY
Part #: B540004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
$2975
QTY
Part #: 350606

Like a mini duckbill clamp or foam core holder, use this MICROClip to hold your foam core or anything else you need to design and maintain the lighting of your shoot.
Availability: In Stock
$1085
QTY
Part #: 386B

The Manfrotto Nano Clamp is smaller in size than the popular Super Clamp and is even more versatile. Its reduced size is the most important plus, and at just 3.87 ounces, the Nano Clamp has a capacity of 12.13 pounds. The Nano Clamp has both 3/8” and ¼” attachments to make it compatible with...
Availability: In Stock
$3488
QTY
Part #: DL4001P

The new, economical Dot Line Corp. Table Top Tripod Clamp Combo is a composite material clamp that features locking metal legs that fold up out of the way when not in use. The feet of the legs are a composite material to help protect surfaces. The ball head rotates 360° and tilts 90°. The jaw...
Availability: On Backorder
$1195
QTY
Part #: PD05020

For mounting a camera, or small light fixture that has a 1/4-20 inch screw threaded bottom. The Ultra Clamp Assembly locks and tightens to any side car window, shelf or arm up to 1-1/2 inch thickness. Includes a locking 2 way swivel/tilt head.
Availability: In Stock
$2995
QTY
Part #: 171

Clamps onto bars up to 1.37". 5/8" Female Socket.

* Replaces item # 2940
Availability: In Stock
$1695
QTY
Part #: 1980

For secure mounting of nearly any light source or modifier, the heavy-duty Westcott Center Jaw Vise Grip is a must-have accessory for any filmmaker or photographer. With a custom-designed center jaw that features both a flat and a convex surface, this grip can quickly mount studio lights, scrims,...
Availability: In Stock
$4990
QTY
Free Shipping
Part #: 123

The Manfrotto 123 Pivoting Boom Clamp is a pivoting clamp for use with all Super Booms and Heavy Duty Booms. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and 5/8" female receptor.
Availability: In Stock
$4988
QTY
Free Shipping
Part #: C1000

The Avenger C1000 Drop-Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" (Baby) stud.
Availability: In Stock
$815
QTY
Part #: 420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5780
QTY
Free Shipping
Part #: 429678

Made to attach to the dropped ceiling tile support rails found in many offices it affords the mounting of small lighting instruments on its 5/8" pin without the need for a stand. The Drop Ceiling Cable Holder (included with clip) clips onto the 5/8" pin to keep cables near the ceiling and out...
Availability: In Stock
$1530
QTY
Part #: 420112S15

The Mini Matthellini Clamp is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The Mini-Matthellini Clamps are half...
Availability: In Stock
$4335
QTY
Part #: 420210

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design, reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3"...
Availability: In Stock
$6290
QTY
Free Shipping
Part #: B209642

The Matthews Swivel U-Hook Snap-in is a U-Hook bracket to hang cables. It can also be used in pairs to suspend tubes, pipes, photography backgrounds or even to support a horizontal Matthpole.
Availability: In Stock
$1395
QTY
Part #: 540004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
$2975
QTY
Part #: 420100

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5780
QTY
Free Shipping
Part #: 175

Clamps onto bars or flat surfaces up to ° 1.5". Attachment via a 5/8" socket and 5/8" male stud

* Replaces item # 2936
Availability: In Stock
$1450
QTY
Part #: QBC

The Quantum Pole Mounting Clamp for Battery Packs can be used to hang any Quantum battery pack (except for Qpaq-X power pack) from a round or square pole. The belt clip on the Quantum Battery slips through the belt clip slot on the clamp.
Availability: In Stock
$3895
QTY
Part #: 375

The Manfrotto 375 Multiclip is a stacked pair of clips that can be used to clip a reflector card, gobo, prop, leaf, etc., to a stand, branch or shelf. Total length is 4.5".
Availability: In Stock
$988
QTY
Part #: 429618

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin attached....
Availability: In Stock
$3570
QTY
Part #: 429619

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin attached....
Availability: In Stock
$5525
QTY
Free Shipping
Part #: 429620

A cheeseboro clamp with a 1-1/8" pin attached to it serves multiple purposes. Use it with a piece of pipe with a diameter of 1-3/4" to 3-1/4" as a temporary overhead grid.
Availability: On Backorder
$5780
QTY
Free Shipping
Part #: 540011

The Double Super Mafer allows the use of two Mafer attachments with one clamp. The castings and the reformulated protective pads in the jaws are now strong enough for us to be able to make this Double Super Mafer Clamp. Use a Hollywood Superflex Arm at one end and a 5/8" Baby Pin with a light...
Availability: In Stock
$4595
QTY
Part #: B429500

This clamp is shaped like a duck's bill, and is fitted with a stud to mount a small light head, or other grip items. Use it to hold reflector cards or gobos in place.
Availability: In Stock
$2099
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]