MAIL ORDER 800-321-4726
Clamps
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: DL4001P

The new, economical Dot Line Corp. Table Top Tripod Clamp Combo is a composite material clamp that features locking metal legs that fold up out of the way when not in use. The feet of the legs are a composite material to help protect surfaces. The ball head rotates 360° and tilts 90°. The jaw...
Availability: On Backorder
$1195
QTY
Part #: 429620

A cheeseboro clamp with a 1-1/8" pin attached to it serves multiple purposes. Use it with a piece of pipe with a diameter of 1-3/4" to 3-1/4" as a temporary overhead grid.
Availability: On Backorder
$5780
QTY
Free Shipping
Part #: 350617

The MicroClamp can grip to round or flat surfaces, as well as many other objects or shapes one may find on set. It's reduced size and dual 3/8" and ¼" mounting holes give it extreme flexibility. Its strength is derived from a precision aluminum extrusion, it's high performance stick pads and an...
Availability: On Backorder
$2380
QTY
Part #: 425157

The Matthews Baby Grid Clamp is made to clamp securely on overhead grids, car rigs or camera car rails for the mounting of light fixtures. Can be inverted with the pin mounting into a Grip Head for spanning pipe between 2 stands.
Availability: On Backorder
$4845
QTY
Part #: KG301712

The Mini Alli Clamp from Kupo is an all-purpose steel spring clamp with a baby 5/8-inch receiver to accept any baby 5/8-inch stud. The jaw offers a reliable hold and opens from 0.2 to 1.4 inches. This accessory is ideal for holding a fill card or flag. The clamp is made of steel and aluminum and...
Availability: On Backorder
$1400
QTY
Part #: KG301411

The Mini Alli Clamp from Kupo is an all-purpose steel spring clamp with a baby 5/8-inch receiver to accept any baby 5/8-inch stud. The jaw offers a reliable hold and opens from 0.2 to 1.4 inches. This accessory is ideal for holding a fill card or flag. The clamp is made of steel and aluminum and...
Part #: MC1990A

The Manfrotto "Pico Clamp" is an extra-small clamp with versatile use. It is a great tool for mounting portable strobes, cameras, LED light panels, audio recorders, or just about any other piece of low-weight gear that comes equipped with standard 1/4'' or 3/8'' attachments.

Manfrotto "Pico Clamp"...
Part #: ACBSWCP

The Shoe Mount Multiclamp allows you to attach your on-camera flash to a lightstand and add an umbrella or softbox. Incredibly versatile, the Multiclamp makes it possible to raise and tilt your light-something that is not possible when your flash is mounted directly to a lightstand. Your flash...
Part #: KG702512


The Kupo G702312 double convi clamp (silver) is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi

...
Part #: 320700

Counterbalance springs increase the pantogragh's load capacity without imparing comfort of operation. This is a Foba ROBAE Short Pantograph (Scissors) with a Friction Spring. It's load hover capacity is adjustable from 2.2 - 26.5 lbs (1 - 12kg). If heavier loads are planned, add the ROSAO or ROSAE...
Part #: ACALSWMTB

This is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs to adapt to light stands with top studs smaller than the standard 5/8 inch. Transfers the weight of your softbox to its speed ring, relieving your light head, and providing...
Part #: T134

Attaches to stands, shelves, tripods, etc. Accepts one Flexi-shaft(T1-50).
Part #: KG900412

The Kupo G900412 3-way clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.0 - 1.4" (25 - 35mm) in diameter.

Just a quick turn...
Part #: AT8410A

The Audio-Technica Shock Mount - Spring Loaded fits with Audio-Technica Case Style(s): S1, S2, S3, S4, S7, S8, S9, S10, S11, SG1, SG2, SG3, SG4, T1, T2, T3, T4, T5, T6, T7

Features:
  • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts
  • Spring-clip fits most
...
Part #: 429598

The Matthews C - Clamp with 2 Baby Pins - 8 In. in 4 In., 6 In., 8 In., 10 In. and 12 In. with or without 5/8 In. mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two...
$6460
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Free Shipping
Part #: KG702311

The Double Convi Clamp from Kupo consists of a pair of Convi clamps joined back-to-back with a double hexagonal stud. These twin clamps can be used to join a wide variety of materials together, like a cross bar on a pair of Kupoles. The clamps feature lightweight alloy construction with stainless...
Part #: 429038

The Matthews Vise Grip Plier with Two 5/8 In. Pins provides maximum gripping power on any size pipe up to 6 inches in diameter. The Locking Plier also provides maximum gripping power on both flat and round surfaces with smaller diameters. Caution must be taken when the 5/8 inches pin provided...
Part #: RS613

The Tether Tools Rock Solid Baby Side Arm Kit is designed to mount tables, lights, cameras and other gear. The Baby Side Arm Kit includes a Rock Solid Baby Arm, Master Clamp and Aero Elbow and offers a secure and versatile way to mount any 5/8"(16mm) Baby accessory to a round or flat surface....
Part #: 038

The Manfrotto  038 Double Super Clamp is a set of two super clamps fastened together at fixed right angle to provide extra strength support for tubes or bars. The clamps are made of lightweight cast alloy, fastened together at a 90 degrees angle. Clamps on tubes 1/2 to 2-1/8 inches in diameter....
Part #: 035

The Manfrotto 035 Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Replaces item # 2915
Availability: In Stock
$2688
QTY
Part #: YA056

The Phototools Adjustable Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.
Availability: In Stock
$1999
QTY
Part #: 035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
$2988
QTY
Part #: YA051

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
$499
QTY
Part #: B540004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
$2975
QTY
Part #: 350606

Like a mini duckbill clamp or foam core holder, use this MICROClip to hold your foam core or anything else you need to design and maintain the lighting of your shoot.
Availability: In Stock
$1085
QTY
Part #: 386B

The Manfrotto Nano Clamp is smaller in size than the popular Super Clamp and is even more versatile. Its reduced size is the most important plus, and at just 3.87 ounces, the Nano Clamp has a capacity of 12.13 pounds. The Nano Clamp has both 3/8” and ¼” attachments to make it compatible with...
Availability: In Stock
$3488
QTY
Part #: B541004

The Matthews Super Mafer Clamp with 5/8 in. Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength...
Availability: In Stock
$3740
QTY
Part #: C1005

For mounting a small to medium size light fixture from a drop ceiling.
Availability: In Stock
$1095
QTY
Part #: KG701611

The Kupo Convi Clamp With Hex Stud (Black) is more than just an amazing clamp; it's the foundation of an entire grip system.

The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi...
Availability: In Stock
$2550
QTY
Part #: 417026

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common use is for camera shots...
Availability: In Stock
$5499
QTY
Free Shipping
Part #: PD05020

For mounting a camera, or small light fixture that has a 1/4-20 inch screw threaded bottom. The Ultra Clamp Assembly locks and tightens to any side car window, shelf or arm up to 1-1/2 inch thickness. Includes a locking 2 way swivel/tilt head.
Availability: In Stock
$2995
QTY
Part #: 171

Clamps onto bars up to 1.37". 5/8" Female Socket.

* Replaces item # 2940
Availability: In Stock
$1695
QTY
Part #: 1980

For secure mounting of nearly any light source or modifier, the heavy-duty Westcott Center Jaw Vise Grip is a must-have accessory for any filmmaker or photographer. With a custom-designed center jaw that features both a flat and a convex surface, this grip can quickly mount studio lights, scrims,...
Availability: In Stock
$4990
QTY
Free Shipping
Part #: 123

The Manfrotto 123 Pivoting Boom Clamp is a pivoting clamp for use with all Super Booms and Heavy Duty Booms. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and 5/8" female receptor.
Availability: In Stock
$4988
QTY
Free Shipping
Part #: C1000

The Avenger C1000 Drop-Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" (Baby) stud.
Availability: In Stock
$815
QTY
Part #: 420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5780
QTY
Free Shipping
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]