MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: On Backorder
$2988
QTY
Part #: C1000

The Avenger C1000 Drop-Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" (Baby) stud.
Availability: In Stock
$815
QTY
Part #: KG701611

The Kupo Convi Clamp With Hex Stud (Black) is more than just an amazing clamp; it's the foundation of an entire grip system.

The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi...
Availability: In Stock
$2550
QTY
Part #: 420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5780
QTY
Free Shipping
Part #: 429678

Made to attach to the dropped ceiling tile support rails found in many offices it affords the mounting of small lighting instruments on its 5/8" pin without the need for a stand. The Drop Ceiling Cable Holder (included with clip) clips onto the 5/8" pin to keep cables near the ceiling and out...
Availability: In Stock
$1530
QTY
Part #: KG000712

This Convi Clamp accessory is a super strong steel "J" hook with a hex pin. The Kupo Hex J Hook (2 Pack) is perfect for hanging strobe packs, HMI ballasts, or rigging background crossbars to light stands. They are one of the most popular accessories in the vast Convi Clamp System.
Availability: In Stock
$1220
QTY
Part #: 420112S15

The Mini Matthellini Clamp is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The Mini-Matthellini Clamps are half...
Availability: In Stock
$4335
QTY
Part #: 429042

Of Amish design... Also known as the Quacker Clamp or Duck Bill. This clamp is ideal for positioning foam core or bead board.
Availability: In Stock
$8925
QTY
Free Shipping
Part #: KG702512


The Kupo G702312 double convi clamp (silver) is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi

...
Part #: 417026

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common use is for camera shots...
Availability: On Backorder
$5499
QTY
Free Shipping
Part #: 386B

The Manfrotto Nano Clamp is smaller in size than the popular Super Clamp and is even more versatile. Its reduced size is the most important plus, and at just 3.87 ounces, the Nano Clamp has a capacity of 12.13 pounds. The Nano Clamp has both 3/8” and ¼” attachments to make it compatible with...
Availability: In Stock
$3488
QTY
Part #: 420210

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design, reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3"...
Availability: In Stock
$6290
QTY
Free Shipping
Part #: 320700

Counterbalance springs increase the pantogragh's load capacity without imparing comfort of operation. This is a Foba ROBAE Short Pantograph (Scissors) with a Friction Spring. It's load hover capacity is adjustable from 2.2 - 26.5 lbs (1 - 12kg). If heavier loads are planned, add the ROSAO or ROSAE...
Part #: B209642

The Matthews Swivel U-Hook Snap-in is a U-Hook bracket to hang cables. It can also be used in pairs to suspend tubes, pipes, photography backgrounds or even to support a horizontal Matthpole.
Availability: In Stock
$1395
QTY
Part #: KG302511

Already a legend in Asia, Kupo has introduced a line of high quality grip gear aimed at videographers, broadcast professionals and photographers everywhere. Durability, exacting standards of manufacturing and dependability are hallmarks of the Kupo name. This Kupo Off-Camera Flash Alli Clamp...
Availability: In Stock
$4850
QTY
Part #: 350606

Like a mini duckbill clamp or foam core holder, use this MICROClip to hold your foam core or anything else you need to design and maintain the lighting of your shoot.
Availability: In Stock
$1085
QTY
Part #: ACBSWCP

The Shoe Mount Multiclamp allows you to attach your on-camera flash to a lightstand and add an umbrella or softbox. Incredibly versatile, the Multiclamp makes it possible to raise and tilt your light-something that is not possible when your flash is mounted directly to a lightstand. Your flash...
Part #: 123

The Manfrotto 123 Pivoting Boom Clamp is a pivoting clamp for use with all Super Booms and Heavy Duty Booms. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and 5/8" female receptor.
Availability: In Stock
$4988
QTY
Free Shipping
Part #: 035

The Manfrotto 035 Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Replaces item # 2915
Availability: In Stock
$2688
QTY
Part #: 275

Clamps onto bars up to Ø 35mm. It can be mounted also on 16mm extension arms.

* Replaces item # 2891
Availability: In Stock
$1588
QTY
Part #: B541004

The Matthews Super Mafer Clamp with 5/8 in. Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength...
Availability: In Stock
$3740
QTY
Part #: 540004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
$2975
QTY
Part #: 541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes with...
Availability: In Stock
$3740
QTY
Part #: 420100

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
Availability: In Stock
$5780
QTY
Free Shipping
Part #: 420101

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2” or 3” Center Jaw...
Availability: In Stock
$5780
QTY
Free Shipping
Part #: ACALSWMTB

This is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs to adapt to light stands with top studs smaller than the standard 5/8 inch. Transfers the weight of your softbox to its speed ring, relieving your light head, and providing...
Part #: 175

Clamps onto bars or flat surfaces up to ° 1.5". Attachment via a 5/8" socket and 5/8" male stud

* Replaces item # 2936
Availability: In Stock
$1450
QTY
Part #: 196AC

The Manfrotto 196AC Universal Clamp with 1/4"-20 Screw clamps items from .08" to .62" (2mm to 16mm). Ideal for use with the Magic Arm and Articulated Arm product lines.

* Replaces item # 2938
Availability: In Stock
$1795
QTY
Part #: 171

Clamps onto bars up to 1.37". 5/8" Female Socket.

* Replaces item # 2940
Availability: In Stock
$1695
QTY
Part #: T134

Attaches to stands, shelves, tripods, etc. Accepts one Flexi-shaft(T1-50).
Part #: QBC

The Quantum Pole Mounting Clamp for Battery Packs can be used to hang any Quantum battery pack (except for Qpaq-X power pack) from a round or square pole. The belt clip on the Quantum Battery slips through the belt clip slot on the clamp.
Availability: In Stock
$3895
QTY
Part #: C1005

For mounting a small to medium size light fixture from a drop ceiling.
Availability: In Stock
$1095
QTY
Part #: C1575B

Ideal clamp for Cine, Broadcast or Lighting & Entertainment application. Clamping system achieved via a metal knob ensuring extra solidity. Works on diameters from 13mm to 55mm.
Availability: In Stock
$2788
QTY
Part #: C210

The Avenger C210 Baby Pipe Clamp works on diameters from 10mm to 55mm.
Availability: In Stock
$5588
QTY
Free Shipping
Part #: C295

Stage clamp supplied with 28mm stud.
Availability: In Stock
$2395
QTY
Part #: 375

The Manfrotto 375 Multiclip is a stacked pair of clips that can be used to clip a reflector card, gobo, prop, leaf, etc., to a stand, branch or shelf. Total length is 4.5".
Availability: In Stock
$988
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]