MAIL ORDER 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Part #: 5024

The JTL background support system was designed with versatility and ease of use in mind. Our patented crossbar connection allows for effortless setup and disassembling, so you can easily use it at several different locations. It also prevents sagging in the middle of the bar, ensuring the bar's...
Part #: LLLB8857

The HiLite backgrounds range allows the photographer to work in a way that was extremely difficult to achieve in the past,
Part #: 032B

The Manfrotto 032B Single Autopole (Black) single action locking cam Autopole mounts between the floor and ceiling of a studio.

Autopoles support backgrounds, lights, and grip arms with the addition of Super Clamps, Hooks, and crossbars. Autopole extends from 210cm to 370cm. The cantilever system...
Part #: 046MCG

The Manfrotto Expan Drive Set with Grey Metal Chain enables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the roll....
Availability: In Stock
$8988
QTY
Part #: 046MCR

The Manfrotto Expan Drive Set with Red Metal Chainenables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the roll....
Availability: In Stock
$8988
QTY
Part #: 046MCB

The Manfrotto Expan Drive Set with Black Metal Chain enables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the...
Availability: On Backorder
$8988
QTY
Part #: 272B

3 section telescopic background pole on it's own.
Availability: In Stock
$7088
QTY
Part #: 0473

The Alu-Core allows you to use the Expan system with uncored paper or cloth backgrounds. It consists of two aluminum sections which interlock by means of a joining casting. The Expans are inserted into the Alu-Core and provide a core for background rolls.

This ALu-Core is 12 ft (3.6 M)long,...
Availability: On Backorder
$6988
QTY
Part #: 0472

Aluminum core in 2 sections: 50mm diameter for uncored background paper. Designed to accept Expan Drives. Includes double-sided tape to hold paper. Length: 108.3" (9 feet)

* Replaces item # 2922
Part #: 091MCR

The Manfrotto Expan Drive Metal Chain is a replacement red chain. Metal beats plastic for strength and longevity, as far as Expan Drive chains go. It is 11.5' (3.5 m) long. Can replace plastic chain on Expan 046.

Length - 137.79in.  (3.5m)
Weight - 1.32lbs.
Material - technopolymer 
Color
...
Part #: 0622

Counterweight for background paper in 2 sections.
Part #: 059WM

Wall mount background paper holder set for one Expan 2920. Comes complete with screw set for mounting to wall studs. Weight 1.2 lbs
Availability: In Stock
$1845
QTY
Part #: 039

Plugs into Super Clamp socket. Ideal for cross poles when used to support background paper. The Manfrotto 039 U-Hook Cross Bar Holders is a set of two U-hooks that plug into a Super Clamp socket.

* Replaces part # 2902P
Availability: In Stock
$1090
QTY
Part #: 094

Provides weight to keep Expan chain tight.

* Replaces item # 2925
Part #: 319167

The Matthews 20x20 ft. Green/Blue Digital Screen is made of the best fabric on the market today. HD shooters will find this surface particular attractive to work with since they won't need as much wattage for their shoots. Matthews 20x20 are sized industry-standard approximate measurement of 1...
Part #: 319793

Matthews makes the Matthews 20x20 ft. Solid Digital Screen (Green) out of the best fabric on the market today. Matthews 20'x20' are sized industry-standard approximate measurement of 19.3'x19.3'. All fabrics are tested in a black chamber with an incandescent light source at one end and the fabric...
Part #: 319792

Matthews makes the 12x12 ft. Solid Digital Screen (Green) out of the best fabric on the market today. Matthews 12'x12' are sized industry-standard approximate measurement of 11'8"x11'8". All fabrics are tested in a black chamber with an incandescent light source at one end and the fabric positioned...
Part #: PP198

Duvetyne is used for Blocking out any Unwanted Light Transmissions that May Come Through Windows. Flame Resistant.
Availability: On Backorder
$6999
QTY
Part #: PP197

Duvetyne is used for Blocking out any Unwanted Light Transmissions that May Come Through Windows. Flame Resistant.
Availability: On Backorder
$3595
QTY
Part #: PP173

The Mole Richardson 28 x 44 In. Sheet Showcard (Shiney Silver) is perfect for Manipulating Light. It is used as a hard bounce to remove any Unwanted Reflections.
Availability: In Stock
$699
QTY
Part #: PP131

The Mole Richardson 28 x 44 In. Sheet Showcard (Smooth Silver Matte) is perfect for Manipulating Light. A reflection medium helps to remove any Unwanted Reflections.
Availability: In Stock
$699
QTY
Part #: PP200

The Mole Richardson 32 x 40 In. Sheet Showcard (Shiney Pebbled Silver) is perfect for Manipulating Light. A reflection medium helps to remove any Unwanted Reflections.
Availability: On Backorder
$699
QTY
Part #: PP107

The Mole Richardson 32 x 40 In. Sheet Showcard (Black/White) is perfect for Manipulating Light. White will Bounce the Light, Black will help remove any Unwanted Reflections.
Availability: In Stock
$399
QTY
Part #: 1005

This PepperLu Heirloom Faux Floor Mat lends a very realistic feeling of worn wood flooring with variegated tones to photos or videos.

Pepperlu Faux Floor Mats are made of washable 25% lycra / 75% polyester blend fabric with rubber backing. Useable as a floor mats or backgrounds, they quickly roll...
Part #: LS2320Y

The Photoflex Master Stand extends to a height of 12.5 feet. It is designed to support medium sized light fixtures with large umbrellas, or large softboxes -- a load of up to 18 lbs. It has a removable, reversible 5/8 in (16mm) diameter brass stud with a 1/4-20" thread on one end, and a 3/8...
Availability: In Stock
$11995
QTY
Part #: YBGS2800E

The Phototools Background Support Kit includes a Telescoping Backdrop Pole, 2 Light Stands and a carrying bag. The Backdrop Pole is a single-unit with telescoping sections that extends easily with a twist and pull motion to extend each section, with another twist to lock it in place. The
...
Availability: On Backorder
$14999
QTY
Part #: YBPDBLACK

The Phototools Background Paper Drive Set with Black Metal Chain enables the raising and lowering of background paper without lowering the support stands. The paper drive set uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts
...
Availability: In Stock
$4999
QTY
Part #: RS2013

Unique compact 4-section background stand is designed to easily go anywhere. Comes complete with two uprights that collapse to only 36" in length but extend to 9'8". The crossbar accommodates rolls of seamless paper up to 114" wide. Features all metal collets. Extension posts can be mounted on...
Part #: RS2001

This truly wide background stand features 3 uprights to support the 22 foot wide crossbar. The crossbar comes in 7 sections. The middle section has an opening allowing the center upright to support the middle of the crossbar. The diameter of the crossbar is 27mm. The sections of the crossbar lock...
Part #: RSRC1010B

The RC series of muslin backgrounds are designed to be a lower cost alternative to RPS Studio standard muslin material. Although these value backgrounds have a smaller thread count they still have a weight and stiffness that is expected of a good muslin material. As with their other muslin bac...
Availability: On Backorder
$5995
QTY
Part #: RSRC1010CKG

The RC series of muslin backgrounds are designed to be a lower cost alternative to RPS Studio standard muslin material. Although these value backgrounds have a smaller thread count they still have a weight and stiffness that is expected of a good muslin material. As with their other muslin bac...
Availability: In Stock
$5995
QTY
Part #: RSRC1010W

The RC series of muslin backgrounds are designed to be a lower cost alternative to RPS Studio standard muslin material. Although these value backgrounds have a smaller thread count they still have a weight and stiffness that is expected of a good muslin material. As with their other muslin bac...
Availability: In Stock
$5995
QTY
Part #: RS-RB1010CKB

The RPS Studio 10 x 10 ft. Cloth Muslin Photography Backgrounds are designed to be a lower cost alternative to RPS Studio standard muslin material. Although these value backgrounds have a smaller thread count they still have a weight and stiffness that is expected of a good muslin material. As...
Availability: In Stock
$5995
QTY
Part #: RS2014

Extra crossbar for all stands allows additional rolls to be added. Each crossbar extends from 4-1/2 to 10 foot in legnth. 28mm in diameter.
Availability: On Backorder
$5595
QTY
Part #: RS2011

Extends the width of the basic unit 144" to accommodate rolls up to 12' in width. 1 required for each roll.
Availability: In Stock
$4995
QTY
Part #: RS2024

The RPS Studio Background Wall Mount is a heavy duty background holder made of metal and mounts to wall studs or ceiling joists. Arms are 1-5/8 In. wide and vary in length from approximately 5-1/2 In. to 8 In. long to allow background material to easily move up and down. Overall length of the...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2016 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]